Prorack K473 Manual de usuario
K473
Fitting Kit
EN Fitting Instructions for Basic Carrier
x 4 x 4 x 4 x 4
Revision No: 6F 1
Fitting Kit K473
MAX kgs (lbs)
W/P WHD
GMC
Sierra Crew Cab, 4dr Truck 07-+ US 75 kgs (165 lbs) 75 kgs (165 lbs)
Sierra Crew Cab, 4dr Truck 99-07 US 75 kgs (165 lbs) 75 kgs (165 lbs)
Sierra Extended Cab, 4dr Truck 01-07 US 75 kgs (165 lbs) 75 kgs (165 lbs)
Sierra Extended Cab, 4dr Truck 07-+ US 75 kgs (165 lbs) 75 kgs (165 lbs)
Sierra, 2dr Truck 07-+ US 75 kgs (165 lbs) 75 kgs (165 lbs)
Sierra, 2dr Truck 99-07 US 75 kgs (165 lbs) 75 kgs (165 lbs)
Chevrolet
Silverado Crew Cab, 4dr Truck 01-07 US 75 kgs (165 lbs) 75 kgs (165 lbs)
Silverado Crew Cab, 4dr Truck 07-+ US 75 kgs (165 lbs) 75 kgs (165 lbs)
Silverado Crew Cab, 4dr Ute 07-+ EU 75 kgs (165 lbs) 75 kgs (165 lbs)
Silverado Extended Cab, 4dr Truck 01-07 US 75 kgs (165 lbs) 75 kgs (165 lbs)
Silverado Extended Cab, 4dr Truck 07-+ US 75 kgs (165 lbs) 75 kgs (165 lbs)
Silverado, 2dr Truck 01-07 US 75 kgs (165 lbs) 75 kgs (165 lbs)
Suburban, 5dr SUV 00-06 US 75 kgs (165 lbs) 75 kgs (165 lbs)
Tahoe, 5dr SUV 07-+ US 75 kgs (165 lbs) 75 kgs (165 lbs)
2
Fitting Kit K473
X
A B C 1 2 3
Sierra Crew Cab, 4dr Truck 07-+ (US) -100mm 750mm - 1026mm 1004mm -
-3 -15/16ths" 29 1/2ths" - 40 3/8ths" 39 1/2ths" -
Sierra Crew Cab, 4dr Truck 99-07 (US) -200mm 500mm - 1005mm 1005mm -
-7 -7/8ths" 19 11/16ths" - 39 9/16ths" 39 9/16ths" -
Sierra Extended Cab, 4dr Truck 01-07 (US) -200mm 500mm - 1002mm 1002mm -
-7 -7/8ths" 19 11/16ths" - 39 7/16ths" 39 7/16ths" -
Sierra Extended Cab, 4dr Truck 07-+ (US) -200mm 450mm - 1018mm 1012mm -
-7 -7/8ths" 17 3/4ths" - 40 1/16ths" 39 13/16ths" -
Sierra, 2dr Truck 07-+ (US) -425mm -65mm - 1030mm 1010mm -
-16 -3/4ths" -2 -9/16ths" - 40 9/16ths" 39 3/4ths" -
Sierra, 2dr Truck 99-07 (US) -515mm -65mm - 1035mm 1010mm -
-20 -1/4ths" -2 -9/16ths" - 40 3/4ths" 39 3/4ths" -
Silverado Crew Cab, 4dr Truck 01-07 (US) -100mm 650mm - 1009mm 1004mm -
-3 -15/16ths" 25 9/16ths" - 39 3/4ths" 39 1/2ths" -
Silverado Crew Cab, 4dr Truck 07-+ (US) -100mm 750mm - 1026mm 1004mm -
-3 -15/16ths" 29 1/2ths" - 40 3/8ths" 39 1/2ths" -
Silverado Crew Cab, 4dr Ute 07-+ (EU) -200mm 450mm - 1018mm 1012mm -
-7 -7/8ths" 17 3/4ths" - 40 1/16ths" 39 13/16ths" -
Silverado Extended Cab, 4dr Truck 01-07 (US) -200mm 500mm - 1002mm 1002mm -
-7 -7/8ths" 19 11/16ths" - 39 7/16ths" 39 7/16ths" -
Silverado Extended Cab, 4dr Truck 07-+ (US) -200mm 450mm - 1018mm 1012mm -
-7 -7/8ths" 17 3/4ths" - 40 1/16ths" 39 13/16ths" -
Silverado, 2dr Truck 01-07 (US) -65mm -515mm - 1035mm 1010mm -
-2 -9/16ths" -20 -1/4ths" - 40 3/4ths" 39 3/4ths" -
Suburban, 5dr SUV 00-06 (US) -200mm 500mm - 995mm 995mm -
-7 -7/8ths" 19 11/16ths" - 39 3/16ths" 39 3/16ths" -
Tahoe, 5dr SUV 07-+ (US) -200mm 500mm - 1010mm 1015mm -
-7 -7/8ths" 19 11/16ths" - 39 3/4ths" 39 15/16ths" -
3
Fitting Kit EN
K473
First Time Installation
●Remove parts from inside the package and
check. Contact your dealer if any parts are
missing or damaged.
●This kit fits type A, B, C and D.
●These instructions show type A crossbar
fitted. They also apply to type B, C and D.
NOTE: Clamp images in these instructions may
not be representative of the clamps in this kit
4
Fitting Kit EN
K473
●Use keys to remove covers.
●Use hex screwdriver to reverse adjusting
screw 10 turns.
●Press adjusting screw and pull crossbar
legs out. Refer to the crossbar instructions
for crossbar adjustment method.
●Ensure each end of the crossbar is
adjusted equally.
5
Fitting Kit EN
K473
●Remove locking screw.
●Apply protective strip as shown.
Trim if required.
●A = Clear
B = Grey
●Attach clamp to each leg. NOTE; clamps
may have labels showing their positions on
the vehicle (For example; "Front Right").
6
Fitting Kit EN
K473
●Refit locking screw so that it goes through
the hole in the clamp. Do not begin to
tighten the locking screw.
●Fit rubber pads (supplied with fitting kit) to
foot.
●Make sure the pad fits into the holes
underneath the foot.
7
Fitting Kit EN
K473
Fitment
●Place crossbar on vehicle. Minimum
recommended spacing between the bars is
700mm (27 1/2") (unless otherwise stated).
●Clamps over rubber door frame mouldings.
●Please check the front of this manual for
information relating specifically to your
vehicle.
●Adjust the legs on the crossbar so that they
are positioned equally from the ends of the
crossbar, and the clamps engage firmly on
the body work of the vehicle.
●Tighten adjusting screw to 5 Nm (3.7 ft lb)
hand tight.
8
Fitting Kit EN
K473
●Tighten locking screw on both legs evenly.
●Check crossbar is securely attached to the
vehicle.
●Use keys to fit and lock covers
9
Fitting Kit EN
K473
CAUTION: Recheck all fasteners immediately after
a load is applied to the crossbars.
Regularly check screws are tight.
10
Tabla de contenidos
Otros manuales de Accesorios para automóviles de Prorack
Prorack
Prorack K820 Manual de usuario
Prorack
Prorack TP1 Manual de usuario
Prorack
Prorack J-Cradle Manual de usuario
Prorack
Prorack K082 Manual de usuario
Prorack
Prorack K997W Manual de usuario
Prorack
Prorack K577W Manual de usuario
Prorack
Prorack PR3097 Manual de usuario
Prorack
Prorack K925 Manual de usuario
Prorack
Prorack 8062003 Manual de usuario
Prorack
Prorack K511 Manual de usuario
Prorack
Prorack K424 Manual de usuario
Prorack
Prorack K343 Manual de usuario
Prorack
Prorack K075 Manual de usuario
Prorack
Prorack K131 Manual de usuario
Prorack
Prorack K105 Manual de operación e instalación
Prorack
Prorack K997 Manual de usuario
Prorack
Prorack K165 Manual de operación e instalación
Prorack
Prorack WHISPBAR S54 Manual de operación e instalación
Prorack
Prorack K757 Manual de usuario
Prorack
Prorack K979 Manual de usuario
