Prorack K1012 Manual de usuario
K1012
Fitting Kit
EN Fitting Instructions for Basic Carrier
x 2 x 2 x 4 x 1
x 1 x 1 x 1 x 4
x 4
Revision No: 2B 1
Fitting Kit K1012
MAX kgs (lbs)
W/P WHD
Mercedes-Benz
E-Class W213, 4dr Sedan Jun 16-+ AU 75 kgs (165 lbs) 75 kgs (165 lbs)
E-Class W213, 4dr Sedan Jun 16-+ NZ 75 kgs (165 lbs) 75 kgs (165 lbs)
E-Class W213, 4dr Sedan Jun 16-+ EU 75 kgs (165 lbs) 75 kgs (165 lbs)
E-Class W213, 4dr Sedan Sep 16-+ ZA 75 kgs (165 lbs) 75 kgs (165 lbs)
E-Class W213, 4dr Sedan Sep 16-+ CN 75 kgs (165 lbs) 75 kgs (165 lbs)
2
Fitting Kit K1012
X
A B C 1 2 3
E-Class W213, 4dr Sedan Jun 16-+ (AU) -375mm 405mm - 927mm 845mm -
-14 -3/4ths" 15 15/16ths" - 36 1/2ths" 33 1/4ths" -
E-Class W213, 4dr Sedan Jun 16-+ (NZ) -375mm 405mm - 927mm 845mm -
-14 -3/4ths" 15 15/16ths" - 36 1/2ths" 33 1/4ths" -
E-Class W213, 4dr Sedan Jun 16-+ (EU) -375mm 405mm - 927mm 845mm -
-14 -3/4ths" 15 15/16ths" - 36 1/2ths" 33 1/4ths" -
E-Class W213, 4dr Sedan Sep 16-+ (ZA) -375mm 405mm - 927mm 845mm -
-14 -3/4ths" 15 15/16ths" - 36 1/2ths" 33 1/4ths" -
E-Class W213, 4dr Sedan Sep 16-+ (CN) -375mm 405mm - 927mm 845mm -
-14 -3/4ths" 15 15/16ths" - 36 1/2ths" 33 1/4ths" -
3
Fitting Kit EN
K1012
First Time Installation
●Remove parts from inside the package and
check. Contact your dealer if any parts are
missing or damaged.
●These instructions show type A crossbar
fitted. They also apply to type B, C and D.
●This kit fits type A, B, C and D.
●Use keys to remove covers.
4
Fitting Kit EN
K1012
●Use hex screwdriver to reverse adjusting
screw 10 turns.
●Press adjusting screw and pull crossbar
legs out. Refer to the crossbar instructions
for crossbar adjustment method.
●Ensure each end of the crossbar is
adjusted equally.
●Attaches to factory-fitted mounting points
●Please check the front of this manual for
information relating specifically to your
vehicle.
●Adjust crossbar in or out to suit vehicle.
Refer to the crossbar instructions for
crossbar adjustment.
5
Fitting Kit EN
K1012
●Tighten adjusting screw to 2 Nm (1.5 ft lb)
hand tight.
●Remove plastic clamp block by gripping bar
leg with fingers and push firmly with
thumbs until clamp block drops out behind
leg.
●Select plastic internal block (from fitting kit)
and insert into foot.
●Repeat for all legs.
6
Fitting Kit EN
K1012
Fitment
●Open or remove fixed-point covers.
●Select grubscrews and screw into the
vehicle's fixed points.
●Do not over tighten.
●Repeat for all four positions.
●Letters refer to the load supports numbers
and position.
●It is important to put the load supports in
the correct position on the vehicle.
●Load Support Number:
A = 349F
B = 350F
7
Fitting Kit EN
K1012
●Place load supports as shown
●Place load support over grubscrew as
shown.
●Refer to the underside of the pad for the
part number.
8
Fitting Kit EN
K1012
●Letters refer to the pad part numbers and
position.
●It is important to put the pads in the correct
position on the vehicle.
●Pad Part Number:
A = 11-04-231A
B = 11-04-232A
C = 11-04-235A
D = 11-04-236A
●Ensure the fixed-point covers sit vertically
in the recess in the pads.
●Place crossbars on pads ensuring the pads
fit into the holes underneath the foot and
the grubscrew passes through the hole in
the foot.
●Repeat for all four positions.
9
Fitting Kit EN
K1012
●Tighten the plastic knob. The side with the
nut showing should be facing up.
●Ensure the plastic knob is in the position
shown when fully tightened.
●Repeat for all legs.
●Check crossbar is securely attached to the
vehicle.
●Use keys to fit and lock covers
10
Tabla de contenidos
Otros manuales de Accesorios para automóviles de Prorack
Prorack
Prorack K1242 Manual de usuario
Prorack
Prorack K075 Manual de usuario
Prorack
Prorack K423 Manual de usuario
Prorack
Prorack K077 Manual de usuario
Prorack
Prorack K560 Manual de usuario
Prorack
Prorack K434 Manual de usuario
Prorack
Prorack K346 Manual de usuario
Prorack
Prorack K311 Manual de usuario
Prorack
Prorack K436 Manual de usuario
Prorack
Prorack K545 Manual de usuario
Prorack
Prorack K751 Manual de usuario
Prorack
Prorack K083 Manual de usuario
Prorack
Prorack K425 Manual de operación e instalación
Prorack
Prorack K1003 Manual de usuario
Prorack
Prorack K903 Manual de usuario
Prorack
Prorack K340 Manual de usuario
Prorack
Prorack K361 Manual de usuario
Prorack
Prorack K1074 Manual de usuario
Prorack
Prorack K700 Manual de operación e instalación
Prorack
Prorack K323 Manual de usuario
