8553521 6,000W SHOP HEATER V1.0
4 For technical questions call 1-800-665-8685
2. Wear protective clothing designed for the work
environment and tool.
3. Non-skid footwear is recommended to maintain footing
and balance in the work environment.
4. Wear steel toe footwear or steel toe caps to prevent a foot
injury from falling objects.
PERSONAL PRECAUTIONS
Control the tool, personal movement and the work
environment to avoid personal injury or damage to the tool.
1. Do not operate any tool when tired or under the influence
of drugs, alcohol or medications.
2. Do not overreach when operating the tool. Proper footing
and balance enables better control in unexpected situations.
SPECIFIC SAFETY PRECAUTIONS
WARNING! DO NOT let comfort or familiarity with product
(gained from repeated use) replace strict adherence to the
tool safety rules. If you use this tool unsafely or incorrectly,
you can suffer serious personal injury.
1. Use the correct tool for the job. This tool was designed for
a specific function. Do not modify or alter this tool or use it
for an unintended purpose.
2. Do not use the tool if any parts are damage broken or
misplaced. Repair or replace the parts.
3. The heater becomes hot during operation. Severe thermal
burns can occur on contact. Keep combustible materials at
least 3 feet (0.9 m) away the heater while operating.
3.1 Do not place anything on the heater while it is running.
4. Mount the heater no closer than 1 ft (0.3 m) from the wall
and ceiling or 4.5 in. (11.5 cm) from the rear wall. The heater
should be at least 8 ft (2.4 m) from the floor.
