PROMISE
TECHNOLOGY, INC. 7
8Choose the “Driver” tab in the “Properties” window, and then
press the “Change Driver” button.
9Insert the “Ultra66 Driver” diskette into drive A:.
0In the “Select Hardware Type” dialog box, highlight “SCSI con-
trollers,” and then press “OK.”
¡In the “Select Device” dialog box, choose “Have Disk.”
ÔType “A:\” in the text box and then press “OK.” A message inform-
ing you that Windows has found the “Promise Technology, Inc.,
Ultra66 IDE Controller” should appear.
£Press “OK,” and then in the next window, press “OK” again.
¢If Windows asks you whether or not you want to test if the device
can be removed safely, press “Cancel.”
ˆPress “Yes” when asked if you want to restart your computer. Be
sure to eject the diskette from drive A:.
Windows 95 4.00.950B (OSR2)
1After installing the Ultra66 controller card and configuring the
hard drives (see “Hardware Installation” on page 4), partition and
format your hard drive(s), if necessary.
2Install Windows 95 normally.
3After installation, go to the “Start” menu and choose “Settings.”
4From the “Settings” menu, choose “Control Panel.”
5In the “Control Panel” window, double-click on the “System” icon.
6In the “System” window, choose the “Device Manager”tab.
7In the hierarchical display under “Other Devices” is a listing for
“PCI Mass Storage Controller.” Choose it and then press the
“Properties” button.
8Choose the “Driver” tab in the “Properties” window, and then
press the “Update Driver” button.
9When asked if you want Windows to search for the driver, choose
“Yes (recommended).”
0Insert the “Ultra66 Driver” diskette into the A: drive, then press
“Next.”
¡When Windows informs you that it was unable to find the drivers,
press “Other Locations…”
ÔIn the “Select Other Location” dialog box, type “A:\”.
£Press “OK.” Windows should inform you that it has found “Promise
Technology, Inc., Ultra66 IDE Controller.”
Section 3
