Promag Mifare DESFire Manual de usuario

Mifare®DESFire®Reader

User’s Manual

(For DF7XX Series) REV.C

November 30, 2011

PROMAG

DF7XX

REV.C

Table of Contents

Mifare®Configurable Sector Reader..........................................................................................3

Mifare®

Application Directory (MAD) Support:........................................................................4

Mifare®User-Data Format .............................................................................................................5

Wires Assignment...........................................................................................................................6

Mifare®DESFire®Reader Utility ..................................................................................................7

1. DESFire®Settings...........................................................................................................7

2. Mifare®Settings...............................................................................................................8

3. Reader Settings.............................................................................................................10

4. LED / Buzzer Settings..................................................................................................11

5. Wiegand Setting ............................................................................................................13

6. ABA-TK2 Settings.........................................................................................................14

7. RS232 Output Setting...................................................................................................15

8. Configured Card............................................................................................................17

9. Test Reader After Update ............................................................................................18

ANNEX A. Hardware Specification ...........................................................................................19

ANNEX B. Wiegand Interface.....................................................................................................20

ANNEX C. ABA TK2 Interface.....................................................................................................21

ANNEX D. RS232 Interface .........................................................................................................22

ANNEX E. External LED/Buzzer Control.................................................................................23

ANNEX F. Order Information......................................................................................................24

ANNEX G. WebISP - Firmware Upgrade Utility......................................................................25

ANNEX H. Configured Card........................................................................................................27

ANNEX I. Key Pad Settings (for DF750K/DF760K) ...............................................................29

ANNEX J. History..........................................................................................................................30

PROMAG

DF7XX

REV.C

Mifare®Configurable Sector Reader

Overview:

DF7XX Reader is a user configurable mifare®sector data reader. It can be configured to read mifare®card

with MAD1/MAD2/MAD3 standard in a mifare®application open system, or can be configured to read the

user-defined sector data (Non-MAD) in a user defined closed system.

Output interface can be configured as an RS232 output or Wiegand output. Wiegand output is selectable up

to 128 bits.

DF7XX Reader can also be set with a Reader ID number for multi-unit communication.

Features:

1. Support MAD1/MAD2/MAD3 standard, and support customer MAD-AID setting.

2. Support Non-MAD format with user-defined sector number.

3. Support used card with data offset and length.

4. Support Multi Sectors.

5. Support Mifare®Standard 4K or Mifare®Standard 1K card.

6. Each Reader with Reader ID for multi-link application.

7. Output interface: Wiegand (Default), ABA-TK2 and RS232.

8. Wiegand output selectable from 1 bit to 128 bits.

9. RS232 output packet can be set with Header, Reader ID and Trailer.

Application:

1. Access Control.

2. Time Attendance.

3. Guest Registration System.

4. Academic Services.

5. Info Services.

PROMAG

DF7XX

REV.C

Mifare®

Application Directory (MAD) Support:

DF7XX reader support the MAD format card, the MAD (mifare®application directory) standard proposes the

introduction of common data structures for card application directory entries. DF7XX Reader should take

advantage of this feature using those sector pointers instead of physical sector number.

Yes

Auto Mode

Get

Application Sector#

Request

Anti-collision

Is MAD

Card

AID Match

Using DF700

Non-MAD Sector#

Un-know

Read Sector Data

Output Data

No Tag

Card On Reader

Yes

The DESFire Reader will search the AID from mifare®

application directory (MAD), then got a correct sector

number from MAD. If the card is not a MAD card, the

DF700 will use the Non-MAD Sector# (Setting by

Mifare Reader Utility).

About MAD please visit the web sites:

http://www.mifare.net

http://www.semiconductors.philips.com/ac

robat/other/identification/M001824.pdf

APP KEY

Authenticate

PASS

PROMAG

DF7XX

REV.C

Mifare®User-Data Format

DF7XX reader will send out the data following the format as below, the user data length defined by the

Data-Info. At Wiegand output format, the data output length is fixed (defined by Number Of Bits), so the user

data would be cut if longer than Number of Bits, or the user data would be appended with zero “0” if shorter

than Number of Bits.

Byte 0

Byte 15

Application

Sector #

Block 0

Data-Info

Block 1

USER DATA (Max 128 Bytes)

Block 2

Block 3

Data-Info

bit7 bit6

bit5 bit0

Data Type (11b)

Data Length

Data Type is fixed with 11b which meets “any other data” type of “Card Holder information” as MAD standard.

And data length is including the data with ending zero “0”, so the number of data byte sent by DF7XX reader is

equal to data length with one less for RS232 output.

Example: Data Length is 16, DF7XX reader only sends out 15 bytes for RS232 output.

PROMAG

DF7XX

REV.C

Wires Assignment

Color

Symbol

I/O

Description

Red

VCC

Power Input : DC 7.5V~24V

Black

GND

Power Ground

White

DATA 1

OUT

Wiegand Data 1 Signal / ABA TK2 Clock (Strobe)

Green

DATA 0

OUT

Wiegand Data 0 Signal / ABA TK2 Data

Yellow

TXD

OUT

RS232 TXD (To Host RXD)/ RS485+(for DF710)

Blue

RXD

RS232 RXD (To Host TXD)/ RS485-(for DF710)

Orange

OUT

ABA TK2 Card Present

Brown

LED/BUZEER

External LED/BUZZER Control

To configure the DF7XX Reader you need connect the reader to the MF700KIT first as below:

DF700/DF750

GND

VCC

" "" "

MF700KIT

MF700

9VDC

WAS-T0029

BLACK

WHITE

GREEN

BLUE

YELLOW

RED

ORANGE

BROWN

DF710/DF760

Connect Yellow (T+) and Blue (T-) to RS485 Converter to PC. (Suggest using USB485A)

ORANGE

BROWN

T+

T-

GND

VCC

" "" "

MF700KIT

MF705

9VDC or 12VDC

WAS-T0029

BLACK

WHITE

GREEN

BLUE

YELLOW

RED

Note:

MF700KIT is a test connection kit for DF7XX reader configuration use. It is an optional item for purchasing.

The above housing is for reference only

PROMAG

DF7XX

REV.C

Mifare®DESFire®Reader Utility

1. DESFire®Settings

MAD-AID: (Default=F47030)

MAD Application Identifier number is authorized and assigned by Mifare®.net upon the customer’s

request for registered Application Identifier in a mifare®application open system (AID:

000000h~FFFFFFh).

Or it is also possible for the user to define the AID himself for the application in user defined closed

system without registering into MAD group. According to the AID, DF7XX reader can find and read the

corresponding application on the card.

File ID: (Default=0)

File ID is 0~15. There are three file types. Data file, Value file and Record file. DF7XX Reader will auto

detect the type and output the data.

PROMAG

DF7XX

REV.C

Offset/Length: (Default=0 / 5)

The Data file will depend on the value to output data. The Value file will be sent the value out. The Record

file will be sent the latest record data.

Access Key No/Value: (Default=0 / 00000000000000000000000000000000)

Key must be the same as the Read or Read/Write KEY of the card issued. This means DF7XX reader

only can read the data on the card with the same KEY.

2. Mifare®Settings

Click “Card Type”: “Mifare Only”or “Both”, and this tab will be visibled.

MAD-AID: (Default=4703)

MAD Application Identifier number is authorized and assigned by Mifare®.net upon the customer’s

request for registered Application Identifier in a mifare®application open system (AID: 0000h~FFFFh).

Or it is also possible for the user to define the AID himself for the application in user defined closed

system without registering into MAD group. According to the AID, DF7XX reader can find and read the

corresponding sector on the MAD card.

PROMAG

DF7XX

REV.C

Non-MAD Sector: (Default =0)

When the card is Non-MAD format, DF7XX reader will only read the “Non-MAD Sector”.

(1K Card Sector: 0~15, 4K Card Sector: 0~39). For the Non-MAD application, user can freely define the

Sector.

App Key (KEY_A): (Default=FFFFFFFFFFFF)

App Key must be the same as the KEY_Aof the card issued. This means DF7XX reader only can read

the sector data on the card with the same KEY_A.

Encrypt: (Default=None)

Fraud prevention, Select Encrypt Mode (None, Encrypt 1, Encrypt 2, Encrypt 3, Encrypt 4, Encrypt 5) to

protected your card data. (Remark: Encrypt mode must to work together with the same encrypt mode of

“Mifare Card Issuer”software.)

Used Card (Not issued by “Mifare Card Issuer”)

You have to indicate the data position in the card, when the card is not issued by “Mifare Card Issuer”

software. And you must set the “Offset”(Max 255, and base from zero) form the beginning of sector and

set your data “Length”(Max 128).

Example:

If your card data in the grey grid of sector, you have to set the “Offset”= 17, and set the “Length”= 20.

AID Sector (or Non-MAD Sector)

Block 0

Block 1

Block 2

PROMAG

DF7XX

REV.C

3. Reader Settings

Reader ID: (Default=0)

DF7XX Reader ID for multi link application. (ID: 0~63)

Interface: (Default=Wiegand)

DF7XX reader can be set as Wiegand , RS232 or ABA-TK2 output.

Read Mode: (Default=Card Data Only)

a. Card Data Only: Read card sector data only; If any error (ex. mifare®key error), reader will show

“Card Invalid”status.

b. Card Data or CSN (Card Serial Number): Read card sector data, If any error (ex. mifare®key error),

reader will send the CSN to host.

c. CSN Only: CSN read only.

Output Mode: (Default=Once)

a. Once: Send data (or CSN) to host once.

b. Continue: Keeping sending data (or CSN) to host till card remove. Only for Mifare®Card.

Tabla de contenidos

Otros manuales de Lector de tarjetas de Promag

Promag

Promag MR2S Manual de usuario

Promag

Promag FL20S Manual de usuario

Promag

Promag ER750 Manual de usuario

Promag

Promag Mifare MF7xx Series Manual de usuario

Promag

Promag MF7S Manual de usuario

Manuales populares de Lector de tarjetas de otras marcas

Lindy

Lindy 43185 Manual de usuario

Lindy

Lindy 43185 Manual de usuario

ViziT

ViziT RD-4F Manual de usuario

Jinmuyu Electronics

Jinmuyu Electronics MR811 Series Manual de usuario

AVID ID

AVID ID AVID1043 Manual de usuario

Conrad

Conrad PCMCIA Manual de usuario

Rosslare

Rosslare DR-6255 Manual de usuario

Lindy

Lindy 51541 Manual de usuario

Diapro T?bbi Ürünler

Diapro T?bbi Ürünler Across System Manual de usuario

Johnson Controls

Johnson Controls Kantech tyco ioSmart Manual de usuario

ACS

ACS ACR122L Manual de usuario

Secukey

Secukey S2-MF Manual de usuario

Elecom

Elecom MR-SMC07 series Manual de usuario

Alien

Alien ALR-9800 Manual de usuario

ACS

ACS ACR310 Manual de usuario

Datamars

Datamars R-IN1300 MID Manual de usuario

Alarm Lock

Alarm Lock AL-PRE2 Manual de usuario

xpr

xpr B100PROX-AH Guía del usuario