Prolon M2000 SERIES Instrucciones de funcionamiento y mantenimiento
REV.2.0
PL-QCK-M2000-EN
www.proloncontrols.com |info@proloncontrols.com
17 510 rue Charles, Suite 100, Mirabel, QC, J7J 1X9
QUICK START GUIDE
M2000 SERIES
© Copyright 2018 Prolon. All rights reserved.
No part of this document may be photocopied or reproduced by any means, or translated to
another language without prior written consent of Prolon. All specications are nominal and
may change as design improvements are introduced. Prolon shall not be liable for damages
resulting from misapplication or misuse of its products. All trademarks are the property of their
respective owners.
REV.2.0 / PL-QCK-M2000-EN 3
Table of Contents
Boiler Controller (PL-M2000-BLR).................................................................................4
FlexIO Controller (PL-M2000-FLX) ................................................................................6
Heatpump Controller (PL-M2000-HP & PL-M2000-HPS) ...............................................8
Hydronic Controller (PL-M2000-HYD) ...................................................................... 10
Make Up Air Controller (PL-M2000-MUA) ............................................................... 12
Rooftop Controller (PL-M2000-RTU & PL-M2000-RTUS) .............................................. 14
Compliance............................................................................................................... 16
Technical Specications....................................................................................... 16
REV.2.0 / PL-QCK-M2000-EN4
Boiler Controller (PL-M2000-BLR )
32-122 °F (0-50 °C) Non-condensing
24
VAC
INT Port: Incoming RS485 network
communication (Modbus)
AO 3 - Valve (0-10 / 2-10 / 0-5 VDC)
or backup modulating boiler
AO 2 - Modulating boiler
(0-10 / 2-10 / 0-5 VDC)
AO 1 - Pump 2 (ON/OFF) (0/10VDC)
DO 5 - Pump 1
DO 4 - Boiler stage 4
DO 3 - Boiler stage 3
DO 2 - Boiler stage 2
DO 1 - Boiler stage 1
NET Port: Incoming RS485 network
communication (modbus)
Controller’s power source
(24VAC - Class 2)
Bottom row:
common for all outputs
Bottom row:
common for all inputs
Proof of pump 2 (AO1) (dry contact)
Use max heat setpoint (dry contact)
Disable Boiler Call (dry contact)
Return water temp sensor (10K thermistor)
Proof of pump 1 (DO5) (dry contact)
Supply water temp sensor (10K thermistor)
Outside air temperature sensor
(10K thermistor)
REV.2.0 / PL-QCK-M2000-EN 5
cULus Listed; UL 916 Energy Management Equipment, File E364757, Vol.1
24
VAC
INT Port: Incoming RS485 network
communication (Modbus)
AO 3 - Valve (0-10 / 2-10 / 0-5 VDC)
or backup modulating boiler
AO 2 - Modulating boiler
(0-10 / 2-10 / 0-5 VDC)
AO 1 - Pump 2 (ON/OFF) (0/10VDC)
DO 5 - Pump 1
DO 4 - Boiler stage 4
DO 3 - Boiler stage 3
DO 2 - Boiler stage 2
DO 1 - Boiler stage 1
NET Port: Incoming RS485 network
communication (modbus)
Controller’s power source
(24VAC - Class 2)
Bottom row:
common for all outputs
Bottom row:
common for all inputs
Proof of pump 2 (AO1) (dry contact)
Use max heat setpoint (dry contact)
Disable Boiler Call (dry contact)
Return water temp sensor (10K thermistor)
Proof of pump 1 (DO5) (dry contact)
Supply water temp sensor (10K thermistor)
Outside air temperature sensor
(10K thermistor)
REV.2.0 / PL-QCK-M2000-EN6
FlexIO Controller (PL-M2000-FLX)
32-122 °F (0-50 °C) Non-condensing
24
VAC
INT Port: RS485 network
communication (Modbus)
Analog output 1
Digital output 5
Digital output 4
Digital output 3
Digital output 2
Digital output 1
NET Port: RS485 network
communication (Modbus)
Controller’s power source
(24VAC - Class 2)
Bottom row:
common for all outputs
Bottom row:
common for all inputs
Analog output 2
Analog output 3
Analog input 5
Analog input 6
Analog input 7
Analog input 8
Analog input 9
Analog input 3
Analog input 4
Analog input 2
Analog input 1
REV.2.0 / PL-QCK-M2000-EN 7
cULus Listed; UL 916 Energy Management Equipment, File E364757, Vol.1
24
VAC
INT Port: RS485 network
communication (Modbus)
Analog output 1
Digital output 5
Digital output 4
Digital output 3
Digital output 2
Digital output 1
NET Port: RS485 network
communication (Modbus)
Controller’s power source
(24VAC - Class 2)
Bottom row:
common for all outputs
Bottom row:
common for all inputs
Analog output 2
Analog output 3
Analog input 5
Analog input 6
Analog input 7
Analog input 8
Analog input 9
Analog input 3
Analog input 4
Analog input 2
Analog input 1
REV.2.0 / PL-QCK-M2000-EN8
Heatpump Controller (PL-M2000-HP & PL-M2000-HPS)
32-122 °F (0-50 °C) Non-condensing
24
VAC
Bottom row:
common for all outputs
Bottom Row:
common for all inputs
AO3 - Bypass / VSD
AO2 - Economizer
AO1 - Preheating / Mod. Heat
DO5 - Aux Heat
DO4 - Rev Valve
DO3 - Compressor 2 (Y2)
DO2 - Compressor 1 (Y1)
DO1 - Fan (G)
HPS
INT Port: Prolon
digital temperature
sensor
- OR -
Incoming RS485
network
communication
(Modbus)
HP
Incoming
communication
from remote
computer
- OR -
Network Controller
(dual RJ45 and
terminal blocks)
Static pressure (0-5 / 1-5V) (1 / 1.5 / 2 / 2.5 in)
Ext dry contact for alarm / CO2 sensor (4-20 mA)
External dry contact for proof of fan
Zone temperature setpoint (0-10K potentiometer)
Zone temperature sensor (10K thermistor)
Supply air temperature sensor (10K thermistor)
Return air temperature sensor (10K thermistor)
Outside air temperature sensor (10K thermistor)
Supply water temp sensor (10K thermistor)
Controller’s power source
Unit’s R&C terminals (24VAC)
Dry contact for clogged filter / Dry contact for
schedule override / Supply water temp (10k therm)
HPS
Net Port: Prolon digital
temperature sensor
- OR -
Incoming RS485 network
communication (Modbus)
HP
Outgoing network
communication
(to zones)
REV.2.0 / PL-QCK-M2000-EN 9
cULus Listed; UL 916 Energy Management Equipment, File E364757, Vol.1
24
VAC
Bottom row:
common for all outputs
Bottom Row:
common for all inputs
AO3 - Bypass / VSD
AO2 - Economizer
AO1 - Preheating / Mod. Heat
DO5 - Aux Heat
DO4 - Rev Valve
DO3 - Compressor 2 (Y2)
DO2 - Compressor 1 (Y1)
DO1 - Fan (G)
HPS
INT Port: Prolon
digital temperature
sensor
- OR -
Incoming RS485
network
communication
(Modbus)
HP
Incoming
communication
from remote
computer
- OR -
Network Controller
(dual RJ45 and
terminal blocks)
Static pressure (0-5 / 1-5V) (1 / 1.5 / 2 / 2.5 in)
Ext dry contact for alarm / CO2 sensor (4-20 mA)
External dry contact for proof of fan
Zone temperature setpoint (0-10K potentiometer)
Zone temperature sensor (10K thermistor)
Supply air temperature sensor (10K thermistor)
Return air temperature sensor (10K thermistor)
Outside air temperature sensor (10K thermistor)
Supply water temp sensor (10K thermistor)
Controller’s power source
Unit’s R&C terminals (24VAC)
Dry contact for clogged filter / Dry contact for
schedule override / Supply water temp (10k therm)
HPS
Net Port: Prolon digital
temperature sensor
- OR -
Incoming RS485 network
communication (Modbus)
HP
Outgoing network
communication
(to zones)
REV.2.0 / PL-QCK-M2000-EN10
Hydronic Controller (PL-M2000-HYD)
32-122 °F (0-50 °C) Non-condensing
24
VAC
Bottom row:
common for all outputs
Bottom row:
common for all inputs
Incoming communication from
remote computer -OR- Network Controller
(dual RJ45 and terminal Blocks)
Analog output 3 (0-10VDC)
Analog output 2 (0-10VDC)
Analog output 1 (0-10VDC)
Digital output 5 (24 VAC)
Output function varies
depending on chosen setup
Digital output 4 (24 VAC)
Digital output 3 (24 VAC)
Digital output 2 (24 VAC)
Digital output 1 (24 VAC)
Controller’s power source
Unit’s R&C terminals (24VAC)
Analog input 9 (thermistor / 4-20mA / 0-5VDC)
Analog input 8 (thermistor / 4-20mA / 0-5VDC)
Analog input 7 (thermistor / 4-20mA / 0-5VDC)
Analog input 6 (thermistor / 4-20mA / 0-5VDC)
Analog input 5 (thermistor / 4-20mA / 0-5VDC)
Analog input 4 (thermistor / 4-20mA / 0-5VDC)
Analog input 3 (thermistor / 4-20mA / 0-5VDC)
Outgoing network communication
(to zones)
Analog input 2 (thermistor / 4-20mA / 0-5VDC)
Analog input 1 (thermistor / 4-20mA / 0-5VDC)
Input function varies
dependint on chosen setup
Otros manuales para M2000 SERIES
8
Este manual sirve para los siguientes modelos
8
Tabla de contenidos
Otros manuales de Controladores de Prolon
Prolon
Prolon C1050 Series Guía de inicio rápido
Prolon
Prolon C1000 Series Instrucciones de instalación
Prolon
Prolon M2000 SERIES Instrucciones de instalación
Prolon
Prolon C1000 Series Instrucciones de instalación
Prolon
Prolon C1000 Series Instrucciones de instalación
Prolon
Prolon C1000 Series Instrucciones de instalación
Prolon
Prolon C1000 Series Manual de usuario
Prolon
Prolon M2000 SERIES Instrucciones de instalación
Prolon
Prolon C1050 Series Instrucciones de instalación
Prolon
Prolon PL-M2000 Series Manual de usuario
Prolon
Prolon PL-C1000 Series Guía de inicio rápido
Prolon
Prolon M2000 SERIES Instrucciones de instalación
Prolon
Prolon C1000 Series Instrucciones de instalación
Prolon
Prolon PL-RS Manual de usuario
Prolon
Prolon VC2000 Manual de instalación
Prolon
Prolon NC2000 Instrucciones de instalación
Prolon
Prolon PL-C1000-BLR Manual de usuario
Prolon
Prolon M2000 SERIES Instrucciones de instalación
Prolon
Prolon C1000 Series Instrucciones de instalación
Prolon
Prolon M2000 SERIES Instrucciones de instalación
