PROLiNK PPL1202N Guía del usuario
How to setup PPL1202N Manually
1) Set a Static IP for your PC using a wired connection from the PPL1202N to your
PC/laptop.
http://www.howtogeek.com/howto/19249/how-to-assign-a-static-ip-address-in-xp-vista-or-
windows-7/
Eg IP address 192.168.16.1
Subnet 255.255.255.0
Gateway 192.168.16.168
2) Access http://192.168.16.168 using Internet Explorer.
3) Enter default admin as username, password as password.
4) Click on wireless, basic.
5) Make sure Radio On/Off button shows RADIO OFF.
6) Rename SSID if you so desired. Click Apply to save the settings.
7) Click on Security
8) Select WPA2-PSK for the best wireless throughput and security performance.
9) Enter your desired security password (min 8 characters) in pass phrase.
10) Click Apply to save the settings.
11) Release the static IP from step 1.
12) Connect the PPL1202N at your desired locations and connect your desired devices to it.
To connect wireless, activate the wireless connection on your PC/laptop and connect to the
wireless network (SSID) of the PPL1202N. When prompted the network key, enter the pass
phrase you have set when setting up the wireless security (step 12 above). Your pass phrase
must be exactly entered as in step 12 on your PC/laptop. Incorrect pass phrase entered will
result in unable to connect to the wireless network and you will get a message like “limited or
no connectivity”.
Example of PPL1202N and PPL1201 connectivity diagram.
Tabla de contenidos
Otros manuales de Extensor de PROLiNK
PROLiNK
PROLiNK PWN3701 Manual de usuario
PROLiNK
PROLiNK PPL1202N Manual de usuario
PROLiNK
PROLiNK PME200 Manual de usuario
PROLiNK
PROLiNK PEN1201 Manual de usuario
PROLiNK
PROLiNK PME200 Manual de usuario
PROLiNK
PROLiNK PEN1201 Manual de usuario
PROLiNK
PROLiNK PME200 Manual
PROLiNK
PROLiNK PWN3702P Manual de usuario
