ProLights ECLIPSEFS Manual de usuario

ECLIPSEFS

OPTIC

14° / 19° / 26° / 36° / 50°

USER MANUAL

ECLIPSEFS

LED PROFILER

reproduced in any form or by any means for any commercial use.

In order to improve the quality of products, PROLIGHTS reserves the right to modify the characteristics

stated in this instruction manual at any time and without prior notice.

All revisions and updates are available in the ‘manuals’ section on site www.prolightsamerica.com

ECLIPSEFS

Packing content • ECLIPSEFS

• Power cable

• User manual

TABLE OF CONTENTS Safety

General instructionsGeneral instructions

Warnings and installation precautionsWarnings and installation precautions

1 Introduction

1. 1 Technical drawing1. 1 Technical drawing

1. 2 Congurations1. 2 Congurations

1. 3 Operating elements and connections1. 3 Operating elements and connections

2 Installation

2. 1 Mounting2. 1 Mounting

3 Functions and settings

3. 1 Operation3. 1 Operation

3. 2 Basic3. 2 Basic

3. 3 Menu structure3. 3 Menu structure

3. 4 Static mode3. 4 Static mode

3. 5 Linking3. 5 Linking

3. 6 DMX conguration3. 6 DMX conguration

3. 7 DMX mode3. 7 DMX mode

3. 8 Fixture ID and RDM3. 8 Fixture ID and RDM

3. 9 Connection of the DMX line3. 9 Connection of the DMX line

3. 10 Construction of the DMX termination3. 10 Construction of the DMX termination

3. 11 DMX control3. 11 DMX control

3. 12 Setup3. 12 Setup

3. 13 Avanced3. 13 Avanced

3. 14 Fixure information3. 14 Fixure information

3. 15 Reload Default3. 15 Reload Default

4 Maintenance

4. 1 Maintenance and cleaning the unit4. 1 Maintenance and cleaning the unit

4. 2 Fuse replacement4. 2 Fuse replacement

4. 3 Trouble shooting4. 3 Trouble shooting



ECLIPSEFS

SAFETY

General instruction

• The products referred to in this manual conform to the European Community Directives and are there-

fore marked with and approved for the North American Market.

• The unit is supplied with hazardous network voltage (230V~). Leave servicing to skilled personnel only.

Never make any modications on the unit not described in this instruction manual, otherwise you will

risk an electric shock.

• Connection must be made to a power supply system tted with ecient earthing (Class I appliance ac-

cording to standard EN 60598-1). It is, moreover, recommended to protect the supply lines of the units

from indirect contact and/or shorting to earth by using appropriately sized residual current devices.

• The connection to the main network of electric distribution must be carried out by a qualied electrical

installer. Check that the main frequency and voltage correspond to those for which the unit is designed

as given on the electrical data label.

• This unit is not for home use, only professional applications.

• Never use the xture under the following conditions:

- in places wet;

- in places subject to vibrations or bumps;

- in places with a temperature of over 45 °C.

• Make certain that no inammable liquids, water or metal objects enter the xture.

• Do not dismantle or modify the xture.

• All work must always be carried out by qualied technical personnel. Contact the nearest sales point for

an inspection or contact the manufacturer directly.

• If the unit is to be put out of operation denitively, take it to a local recycling

plant for a disposal which is not harmful to the environment.

Warnings and installation precautions

• If this device will be operated in any way dierent to the one described in this manual, it may suer

damage and the guarantee becomes void. Furthermore, any other operation may lead to dangers like

short circuit, burns, electric shock, etc.

• Before starting any maintenance work or cleaning the projector, cut o power from the main supply.

• Always additionally secure the projector with the safety rope. When carrying out any work, always com-

ply scrupulously with all the regulations (particularly regarding safety) currently in force in the country

in which the xture’s being used.

• Install the xture in a well ventilated place.

• Keep any inammable material at a safe distance from the xture.

• Shields, lenses or ultraviolet screens shall be changed if they have become damaged to such an extent

that their eectiveness is impaired.

• The lamp (LED) shall be changed if it has become damaged or thermally deformed.

• Never look directly at the light beam. Please note that fast changes in lighting, e. g. ashing light, may

trigger epileptic seizures in photosensitive persons or persons with epilepsy.

• Do not touch the product’s housing when operating because it may be very hot.

• This product was designed and built strictly for the use indicated in this documentation. Any other use,

not expressly indicated here, could compromise the good condition/operation of the product and/or

be a source of danger.

• We decline any liability deriving from improper use of the product.

WARNING! Before carrying out any operations with the unit, carefully read this instruction

manual and keep it with cure for future reference. It contains important information about

the installation, usage and maintenance of the unit.

ECLIPSEFS

- 1 - INTRODUCTION

1.1 TECHNICAL DRAWING

Technical drawing Fig.1

259.4mm/

10,21mm

268.8mm/

10,58in

663.3mm/26,11in

ECLIPSEFS + OPTIC

ECLIPSEFS

1.2 CONFIGURATIONS

Conﬁguration

1Reector Housing

Middle part, compatible with

14°, 19°, 26°, 36°, 50° optics

Optics for ECLIPSE proler,

14° beam

Optics for ECLIPSE proler,

19° beam

Optics for ECLIPSE proler,

26° beam

Optics for ECLIPSE proler,

36° beam

Optics for ECLIPSE proler,

50° beam

ECLIPSEFS

Fig.2

Rear panel

1.3 OPERATING ELEMENTS AND CONNECTIONS

1. MOUNTING BRACKET

2. LOCKING KNOB for the mounting bracket

3. HANDLE

4. ECLIPSEFS

5. SAFETY EYE to attach safety cable.

6. SHUTTER

7. ECLIPSEMP - Aluminium middle part

8. OPTIC

9. FILTER FRAME

10. FUSE OLDER in the event of breakage, always

replace the fuse with the same type and

rating.

11. CONTROL PANEL with display and 4 button

used to access the control panel functions

and manage them.

12. POWER OUT (PowerCON OUT): connect to

supply power to the next unit.

13. POWER IN (PowerCON IN): for connection to a

socket (100-240V~/50-60Hz) via the supplied

mains cable.

14. DMX OUT (5-pole XLR):

1 = ground, 2 = DMX-, 3 = DMX+, 4 N/C, 5 N/C

15. DMX IN (5-pole XLR):

1 = ground, 2 = DMX-, 3 = DMX+, 4 N/C, 5 N/C

10 13

Fig.3

CLAMP

SAFETY

CABLE

ECLIPSEFS

- 2 - INSTALLATION

2.1 MOUNTING

ECLIPSEFS may be set up on a solid and even surface. The unit can also be mounted upside down to a cross

arm. For xing, stable mounting clips are required. The mounting place must be of sucient stability and

be able to support a weight of 10 times of the unit’s weight.

When carrying out any installation, always comply scrupulously with all the regulations (particularly re-

garding safety) currently in force in the country in which the xture’s being used.

• Install the projector at a suitable location by means of the mounting bracket (1).

• Always additionally secure the projector with the safety rope from falling down. For this purpose, fas-

ten the safety rope at a suitable position so that the maximum fall of the projector will be 20 cm.

• Adjust the projector and use the knob (2) to slightly release or tighten the locking mechanism of the

bracket if is necessary.

ECLIPSEFS

- 3 - FUNCTIONS AND SETTINGS

3.1 OPERATION

Connect the supplied main cable to a socket (100-240 VAC-50/60 Hz). Then the unit is ready for operation

and can be operated via a DMX controller or it independently performs its show program in succession.

To switch o, disconnect the mains plug from the socket. For a more convenient operation it is recom-

mended to connect the unit to a socket which can be switched on and o via a light switch.

3.2 BASIC

Access control panel functions using the four panel buttons located directly underneath the LCD Display

(g.4).

MODE/ESC UP DOWN ENTER

Used to access the menu or

to return a previous menu

option

Navigates downwards through

the menu list and increases

the numeric value when in a

function

Navigates upwards through

the menu list and decreases

the numeric value when in

a function

Used to select and store the

current menu or conrm the

current function value or

option within a menu

Fig.4 - Functions of the buttons

ECLIPSEFS

3.3 MENU STRUCTURE

1CONNECT ðDMX Address ðValue (1-512) Default: 5CHRGBL

DMX Mode ð1CH

2CH

3CH

3CHRGB

4CHRGBL

5CH

5CHRGBL

8CH

13CH

Tungsten (Dene by

Static=>Tungsten)

1CH-3200K

1CH-5400K

1CH-6500K

RDM ID ðName EclipseFS

RDM Mode ðMode1/Mode2 Default: Mode1

Password 050 (end user calibration)

217 (factory calibration)

PID Code

2SET UP ðTemperature ðTemperature. C/F Fahrenheit /Celsius Default: Celsius

Max Temp 60~90°C/140~194°C Default: 90°C

Screen ðBacklight ðO~99m Default: 02m

Flip Display ðYes/No Default: No

Fixture ðFan mode ðAuto Speed / High Speed Default: Auto Speed

Hibernation Disable/Min(1~99) Default: Disable

Theatre Yes/No Default: No

LED frequency ð600Hz...1200Hz Default: 1200Hz

Adjust ðDimmer...

3ADVANCED ðDimmer

OFF

Dimmer 1

....

Default: Dimmer 1

Halogen ðStudio Mode

HB Mode Default:Studio Mode

Calibration ðPassword 050 (end user calibration)

217 (factory calibration)

External ðYes/No Default: No

Red

Green

Blu

Lime

Tabla de contenidos

Otros manuales de Luminaria de ProLights

ProLights

ProLights EclDisplay CC Manual de usuario

ProLights

ProLights STARK400 Manual de usuario

ProLights

ProLights LUMA1500SP Manual de usuario

ProLights

ProLights DIAMOND7 Manual de usuario

ProLights

ProLights STARKBAR1000 Manual de usuario

ProLights

ProLights PIXIEZOOM Manual de usuario

ProLights

ProLights Astra Wash7PixIP Manual de usuario

ProLights

ProLights PIXIESPOT Manual de usuario

ProLights

ProLights ECLIPSEHD2 Manual de usuario

ProLights

ProLights SMARTBAT Manual de usuario

ProLights

ProLights MINIECLIPSE Manual de usuario

ProLights

ProLights Fury FY700S Manual de usuario

ProLights

ProLights ECLIPSEFRESNELJTW Manual de usuario

ProLights

ProLights Astra Hybrid330 Manual de usuario

ProLights

ProLights TRIBE MINIRUBY Manual de usuario

ProLights

ProLights Sunbar2000FC Manual de usuario

ProLights

ProLights LION Manual de usuario

ProLights

ProLights ECLIPSEHDTWC Manual de usuario

ProLights

ProLights DOTQPACK Manual de usuario

Manuales populares de Luminaria de otras marcas

Emos

Emos CLASSIC ZY1431T Manual de usuario

Westinghouse

Westinghouse Outdoor Lighting Fixture Manual de usuario

Hedler

Hedler C 12 silent Manual de usuario

Blizzard Lighting

Blizzard Lighting Puck: CSI Manual de usuario

Energetic Lighting

Energetic Lighting ELYSL-5004 Series Manual de usuario

Lightmaxx

Lightmaxx Shaft 5R Manual de usuario

Triarch

Triarch 31083 Manual de usuario

Philips

Philips 32614 Series Manual de usuario

IKEA

IKEA TIVED Manual de usuario

Lightolier

Lightolier LP200 Manual de usuario

Chauvet Professional

Chauvet Professional ROGUE R1 BEAM WASH Manual de usuario

Martin

Martin MAC 250 Krypton Manual de usuario

Cooper Lighting

Cooper Lighting Halo L3232E Manual de usuario

Stageline

Stageline ODW-2410RGBW Manual de usuario

Light Sky

Light Sky Tornado Series Manual de usuario

Lightolier

Lightolier Paralyte 2424 PLA2G9LS26U Manual de usuario

Lightolier

Lightolier Lytespan 83ED17S Manual de usuario

Lightolier

Lightolier Calculite CS8226 Manual de usuario