10 INSTALLATION AND OPERATING INSTRUCTIONS
• Do not operate appliance with wet hands as it may cause an
electric shock.
• Do not operate appliance prior to inserting ingredients.
• Do not operate appliance without the lid.
IMPORTANT: To protect the motor and provide you with a long
lasting machine, the Blender has an auto shut down feature. If the
components are not installed correctly the system will not operate.
If the motor overheats due to extended use of the product the
machine will automatically shut down. This is normal and prevents
2. Plug in the Blender and turn on at the wall socket.
3. Turn the Power Switch On, located under the blender base on the
right-hand side.
beep and the control panel will light up.
NOTE:
to Blend.
2. To reduce the speed, turn the speed dial anti-clockwise.
3. The display timer will start counting upwards to show total running
of running time the blender will stop automatically.
blend time will be shown on the display.
the blender at desired speed.
when the pre-set time is completed.
OPERATING INSTRUCTIONS USING IN MANUAL MODE
