Pro-Ject Audio Systems X2 Manual de usuario

1Unpack all items from accessory box. 2Remove dust cover carton from the box. 4

Lift the wrapped turntable out of the box.

5Unpack the power supply. 7Put the drive belt on the pulley

& sub-platter. 8Put the platter on the turntable.

9Remove tonearm twist tie. 11 Put the counterweight in place. 12

Lower the tonearm lift and place the

tonarm between platter & armrest.

13 Balance the tonearm by turning the

counterweight until it stays level.

14 Turn the front scale of the counterweight

to Zero without moving the weight itself.

15 Turn the counterweight counterclockwise

until the scale reads roughly 18.

Put the needle protection cover back

on the cartridge.

counterweight

Connect it E

RCA cable

single adapter

& Allen key

drive belt

Antiskating

Weight

3Unpack the acrylic platter

and subplatter.

6Carefully remove the protection covering.

Remove the needle protection cover.

Put the loop of the Antiskating Weight in

the second groove on the tonearm post.

18 Unpack Dust Cover and put it on

the turntable.

19 Connect to your sound system and you

are ready to enjoy your records!

Small pulley- 33/45 RPM

Big pulley - 78 RPM (round belt)

0°

www.project-audio.com/en/products/x2

Technical Data

Speed

Principle

Speed cariance

Wow & utter

Platter

Main bearing

Tonearm

33, 45, 78 (electronic speed change)

belt drive

33: +/-0,25%; 45: +/-0,20%

33: +/-0,12%; 45: +/-0,10%

30mm thick acryl, 2 kg heavy acryl

Stainless steel

9” carbon/aluminium sandwich tonearm

Eective arm length

Overhang

Eective tonearm mass

Tracking force range

Power consumption

Dimensions

Weight

9“/230 mm

18 mm

13,5 g

0 - 30mN

4.5 W max / 0.3 W standby

460 x 150 x 340 mm (WxHxD) lid closed

10 kg net

X2 Setup Guide

Please read before unpacking.

Getting started:

Make sure you have enough space to unpack your turntable.

Always unpack and setup in a clean enviroment

Important for warranty: Do not throw packaging away.

Unpack the Antiskating stub and screw it

into the pre-drilled hole.

Lower the tonearm with the lift.

Plug in Connect it E

RCA Cable.

Plug in the power

supply.

Otros manuales para X2

Este manual sirve para los siguientes modelos

Otros manuales de Placa giratoria de Pro-Ject Audio Systems

Pro-Ject Audio Systems

Pro-Ject Audio Systems RPM 6.1 SB SuperPack Manual de usuario

Pro-Ject Audio Systems

Pro-Ject Audio Systems Signature 12 Manual de usuario

Pro-Ject Audio Systems

Pro-Ject Audio Systems Remote Box S2 Manual de usuario

Pro-Ject Audio Systems

Pro-Ject Audio Systems Essential II/Phono USB Manual de usuario

Pro-Ject Audio Systems

Pro-Ject Audio Systems Pro-Ject 1 Xpression III Manual de usuario

Pro-Ject Audio Systems

Pro-Ject Audio Systems Juke Box Manual de usuario

Pro-Ject Audio Systems

Pro-Ject Audio Systems VT-E BT L Manual de usuario

Pro-Ject Audio Systems

Pro-Ject Audio Systems Pro-Ject RPM 5 SuperPack Manual de usuario

Pro-Ject Audio Systems

Pro-Ject Audio Systems Pro-Ject RPM 3 Carbon Manual de usuario

Pro-Ject Audio Systems

Pro-Ject Audio Systems Debut Carbon EVO Instrucciones de funcionamiento

Pro-Ject Audio Systems

Pro-Ject Audio Systems 1 Xpression Carbon Classic Manual de usuario

Pro-Ject Audio Systems

Pro-Ject Audio Systems VC-S Actualización de firmware

Pro-Ject Audio Systems

Pro-Ject Audio Systems Debut III SE Manual de usuario

Pro-Ject Audio Systems

Pro-Ject Audio Systems 1 Xpression III Manual de usuario

Pro-Ject Audio Systems

Pro-Ject Audio Systems Pro-Ject 6 PerspeX Manual de usuario

Pro-Ject Audio Systems

Pro-Ject Audio Systems Debut III Manual de usuario

Pro-Ject Audio Systems

Pro-Ject Audio Systems Pro-Ject VC-S Manual de usuario

Pro-Ject Audio Systems

Pro-Ject Audio Systems VC-S2 ALU Manual de usuario

Pro-Ject Audio Systems

Pro-Ject Audio Systems Pro-Ject RPM 9.1 SuperPack 1 Manual de usuario

Pro-Ject Audio Systems

Pro-Ject Audio Systems 2Xperience Primary Manual de usuario

Pro-Ject Audio Systems

Pro-Ject Audio Systems 2 Xperience Basic + Manual de usuario

Pro-Ject Audio Systems

Pro-Ject Audio Systems Pro-Ject 6 PerspeX DC Manual de usuario

Pro-Ject Audio Systems

Pro-Ject Audio Systems SIGNATURE 10 Manual de usuario

Pro-Ject Audio Systems

Pro-Ject Audio Systems Pro-Ject 1 Xpression III Comfort Manual de usuario

Manuales populares de Placa giratoria de otras marcas

Gemini

Gemini CDT-05 MKII Manual de usuario

Rotel

Rotel RP-820 Manual de usuario

Shuman

Shuman MC-250BT Manual de usuario

Stanton

Stanton STR8-150 Manual de usuario

Audio Technica

Audio Technica AT-LPW40WN Manual de usuario

Crosley

Crosley McQueen CR7011-GY Manual de usuario

Reloop

Reloop SMP-1 Manual de usuario

auna

auna TT-Classic Plus Manual de usuario

COMO AUDIO

COMO AUDIO Turntable Analog Manual de usuario

Dual

Dual 1009 F Manual de usuario

REED

REED Muse3C Manual de usuario

AXIOMTEK

AXIOMTEK OPS883-H Series Manual de usuario

Pioneer

Pioneer PL-71 Manual de usuario

Vestax

Vestax PDX-a1 Manual de usuario

Denon

Denon DP-400 Manual de usuario

Dual

Dual 504 Manual de usuario

Audio-Techica

Audio-Techica AT-LP60XBT Manual de usuario

Goldring

Goldring G99 Manual de usuario