Priva FS Concentrator Manual de usuario

FS Concentrator

Installation manual

Contact

Priva B.V.

Zijlweg 3

2678 LC

P.O. Box 18

2678 ZG

De Lier

Nederland

www.priva.nl

[email protected]

Article number 3791521

Version 1.2

Date 13-11-2017

No part of this publication may be reproduced, published or stored in a retrieval system without written prior

permission of Priva B.V.

This publication has been developed with care. However, the products shown may differ in dimensions and

design from the actual products. Priva B.V. will not accept any responsibility for damages caused by any errors

or deficiencies in this publication. Priva B.V. may modify its products and the associated manuals without prior

notice. Priva B.V. advises to check product, installation, hardware and if present software on irregularities.

Priva B.V. owns the patents, patent applications, trademarks or other intellectual property rights regarding the

products described in this publication. With this publication Priva B.V. does not grant the use of the

aforementioned intellectual property rights. Product and company names this publication may not be used

without the permission of Priva B.V.

Terms of delivery are applicable to the products described in this publication. The most recent version of

these terms can be found on the web site of Priva B.V. (www.priva.nl)

FS Concentrator – installation manual – 1.2 3

FS Concentrator

Priva B.V.

4 FS Concentrator – installation manual – 1.2

Contents

About this manual .............................................................................................6

Aim and scope ......................................................................................................................................... 6

Target groups and required competencies.......................................................................................... 6

Availability of the manual....................................................................................................................... 6

Related documents ................................................................................................................................. 6

Explanation of symbols in this document ............................................................................................ 7

Terms and abbreviations........................................................................................................................ 7

Safety...................................................................................................................8

Safety - general ........................................................................................................................................ 8

Electrical safety ........................................................................................................................................ 8

Residual risks ........................................................................................................................................... 8

Installation............................................................................................................................................ 9

Troubleshooting................................................................................................................................... 9

Product description.........................................................................................10

Functions and intended use.................................................................................................................10

Functions ............................................................................................................................................10

Intended use ...................................................................................................................................... 10

Detailed description ..........................................................................................................................10

Transport and storage ....................................................................................12

Dimensions ............................................................................................................................................12

Contents of the package.......................................................................................................................12

Conditions during transport and storage...........................................................................................12

Installation - positioning the unit...................................................................13

Location and environmental conditions............................................................................................. 13

Basic facility requirement.....................................................................................................................13

Positioning the unit ...............................................................................................................................13

Installation - electrical part.............................................................................14

Electrical connection .............................................................................................................................14

Operating software .........................................................................................16

Commissioning ................................................................................................17

Preparations ..........................................................................................................................................17

Reset to factory defaults....................................................................................................................... 18

Commissioning ......................................................................................................................................18

Operation..........................................................................................................19

Taking out of operation ..................................................................................20

FS Concentrator – installation manual – 1.2 5

Troubleshooting...............................................................................................21

Troubleshooting - general ....................................................................................................................21

Maintenance and repair .................................................................................22

Firmware updates .................................................................................................................................22

Disposal of waste equipment ........................................................................23

Appendices .......................................................................................................24

Technical specifications ........................................................................................................................24

EC Declaration of Conformity ..............................................................................................................25

FCC Statement .......................................................................................................................................26

IC Statement...........................................................................................................................................26

Priva B.V.

6 FS Concentrator – installation manual – 1.2

About this manual

Aim and scope

This manual concerns the FS Concentrator, a wireless access point for the labour registration

system for the horticulture industry.

This manual contains all of the information required to safely and correctly transport, install,

commission and maintain the FS Concentrators. This manual will also allow you to effectively

observe and resolve any malfunctions.

For the sake of simplicity this manual uses the term "unit", to refer to FS Concentrator.

Target groups and required competencies

Target group

Tasks and responsibilities

Training, knowledge and experience

required

Installers/

service engineers

The unit:

•Transportation

•Positioning

•Installation

•Commissioning and set

•Testing after initial

commissioning and

problem solving

•Operation

•Annual checks

•Disposal of the unit at the

end of the service life

•technical training in the field of

electrical engineering

•experience with electrical

installations for the horticulture

industry

•Priva product specific training

•command of (technical) English

Availability of the manual

This manual is exclusively intended for installers and service engineers.

For employees who operate and monitor the unit, the operating manual and any other relevant

manuals (such as the software manual of the FS Production registration system) must be

available at the workplace.

Related documents

FS Reader Software – User Manual

FS Concentrator – installation manual – 1.2 7

Explanation of symbols in this document

Safety warning: danger of physical injury or damage to the product, the installation or the

environment.

Caution (instruction to prevent problems or material damage)

Information

Tip

Terms and abbreviations

The list below states the abbreviations and terms relating to the Priva labour and

production registration units of FS Performance. Therefore, abbreviations and

terms that do not apply to your specific unit and as a result are not used in this

manual may still be found in the list below.

Abbreviation / term

Explanation

FS Reader

Handheld device for registration of labour

FS Cradle

Storage/charger for the handheld device for registration of labour

FS Tag

Electronic label for the labour registration system

FS Concentrator

Wireless access point for the labour registration system

FS Router

Wireless repeater for the labour registration system

FS Reader Software

Supporting software for handheld devices for registration of labour

Priva B.V.

8 FS Concentrator – installation manual – 1.2

Safety

Safety - general

•Only Priva approved installers/service engineers who have received product-specific training

from Priva are allowed to install, configure, repair and, if necessary, alter the equipment

•Making alterations to the safeguards and safety icons on the equipment is prohibited.

•Both the installer/service engineer and the user must check and maintain the equipment (the

safeguards in particular) in accordance with the instructions in this manual. Keep the product

clean and the surroundings tidy.

•Report faults or damage to Priva immediately. Inactivate the equipment and do not use it if a

deficiency is observed.

•Only use original spare parts for repairs (refer to the price list).

•After repairing the unit, check the correct status and functioning of the equipment.

•If the user allows personnel to operate the equipment, he must provide sufficient instructions.

In particular, this should be on the safety risks and safety instructions as stated in this manual.

He must also supervise correct compliance with the instructions.

•Ensure that the personal protective equipment prescribed in this manual is available and that

it is used.

•Display the safety icons that are applicable in the room where the equipment is set up.

Electrical safety

The unit is powered from the mains voltage. There is a potential hazard of electrocution or fire

resulting from a short circuit. Therefore, comply with the following safety instructions:

•Keep the housing of electrical components (cabinet, pump etc.) closed.

•Keep the electrical parts dry.

•Ensure that the grounding is correctly connected.

•Ensure that the unit is connected to its own fuse group with the correct fuses/circuit

breakers.

During installation or maintenance, or while resolving malfunctions it may be necessary to open

the housing of the electrical components. In this case, comply with the following safety

instructions:

•Make sure there is no voltage on the unit by removing the plug from the socket outlet, or by

removing fuses / disconnecting circuit breakers.

•If the unit cannot be made free of electricity, then take extreme care. Use well insulated tools

and do not touch wire ends, connections and electrical components with bare hands. Keep

the surroundings dry and ensure that there is someone close by to keep an eye on you.

•Wear a grounded wristband while working in the cabinet. Static electricity can damage the

electronic components.

Residual risks

The following risks could not be excluded in the design:

FS Concentrator – installation manual – 1.2 9

•If the unit is altered or is used in such a way that it becomes contrary to the instructions in

this manual, unforeseen risks may occur.

Installation

Only Priva approved installers are allowed to install and configure the product.

Troubleshooting

In case of problems, in most cases a message will be generated. This manual describes the

problems you might be able to solve yourself.

Priva B.V.

10 FS Concentrator – installation manual – 1.2

Product description

The FS Concentrator is part of the labour and production registration system of Priva FS

Performance.

The FS Concentrator is used to transfer data between the wireless network and the Priva FS

Performance database.

Functions and intended use

Functions

The FS Concentrator’s main function is to collect registrations being sent over the wireless

network and transmit them to the database for storage. Furthermore, the FS Concentrator plays

a vital role in the configuration and authorization of new hardware in the system.

Intended use

The intended use for the FS Concentrator is to be positioned strategically in the facility. Once it

has been placed efficiently, it is not to be moved unless there are major changes in the layout of

the facility. When the FS Concentrator is installed and operational, no further action is required.

Detailed description

The FS Concentrator forms the bridge between the wireless network and the database server. As

from this perspective it performs the router functions, so it can also be seen as the first router in

the wireless chain.

For the most simple configuration, where a customer only requires wireless access in the pack-

house, only one FS Concentrator will be sufficient, thus without any routers.

For larger greenhouses, more FS Concentrators can be used to access the database server from

different greenhouse sections on to one network. Each FS Concentrator will manage and control

a set of FS Routers that have the best connection characteristics to that FS Concentrator at that

moment in time. A constraint is applicable for the number of FS Routers that together form the

chain between the FS Reader and the FS Concentrator: it should be taken into account that at

most 38 FS Routers can be supported in between the FS Reader and FS Concentrator. However

because of network performance reasons, at most 20 FS Routers per FS Concentrator should be

used in one chain.

The FS Concentrator can be placed either in the greenhouse or in the packhouse, as long as it can

communicate with the first FS Router in the wireless chain. For reasons of optimal speed during

heavy data loads, such as updating the firmware in the FS Readers, it is preferred that the FS

Concentrator is placed close to the location of the FS Cradles.

The FS Concentrator takes care of the following tasks:

•Forwarding :

oIt forwards the transaction data that will be received from the FS Routers and FS

Readers to the Database Server;

oIt forwards network hardware configuration information from the FS Reader

Software to the FS Routers and FS Readers.

•Data logging :

oIt logs the network status information of the wireless network.

Tabla de contenidos

Manuales populares de Punto de acceso inalámbrico de otras marcas

D-Link

D-Link DWL-2100AP - AirPlus Xtreme G Manual de usuario

Ubiquiti

Ubiquiti NanoStation NSM2 Manual de usuario

Cisco

Cisco Aironet 1550 Series Manual de usuario

Aruba

Aruba IAP-335 Manual de usuario

Advantek Networks

Advantek Networks AWN-AP-54MR Manual de usuario

IP-COM

IP-COM AP355 Manual de usuario

Buffalo

Buffalo AirStation WLA-L11G Manual de usuario

EnGenius

EnGenius EnStationACv2 Manual de usuario

D-Link

D-Link DAP-3662 Manual de usuario

xG Technology

xG Technology xMax CN1300 Manual de usuario

Widelink

Widelink ezWave WAP-1100 Series Manual de usuario

Edimax

Edimax CAP1200 Manual de usuario

Ubiquiti

Ubiquiti LBE-5AC-Gen2 Manual de usuario

Aruba

Aruba AP-203R Manual de usuario

LuXout Shades

LuXout Shades LUXSHADE MOTION Manual de usuario

CreatComm

CreatComm TB5F Manual de usuario

SineDigital

SineDigital MW-1500AP(H) Manual de usuario

TP-Link

TP-Link AP9650 V1 Manual de usuario