Priva FS Cradle Manual de usuario

FS Cradle

Installation manual

Contact

Priva B.V.

Zijlweg 3

2678 LC

P.O. Box 18

2678 ZG

De Lier

Nederland

www.priva.nl

[email protected]

Article number 3791522

Version 1.2

Date 31-8-2017

No part of this publication may be reproduced, published or stored in a retrieval system without written prior

permission of Priva B.V.

This publication has been developed with care. However, the products shown may differ in dimensions and

design from the actual products. Priva B.V. will not accept any responsibility for damages caused by any errors

or deficiencies in this publication. Priva B.V. may modify its products and the associated manuals without prior

notice. Priva B.V. advises to check product, installation, hardware and if present software on irregularities.

Priva B.V. owns the patents, patent applications, trademarks or other intellectual property rights regarding the

products described in this publication. With this publication Priva B.V. does not grant the use of the

aforementioned intellectual property rights. Product and company names this publication may not be used

without the permission of Priva B.V.

Terms of delivery are applicable to the products described in this publication. The most recent version of

these terms can be found on the web site of Priva B.V. (www.priva.nl)

FS Cradle – Installation manual – 1.2 3

FS Cradle

Priva B.V.

4 FS Cradle – Installation manual – 1.2

Contents

About this manual .............................................................................................6

Aim and scope ......................................................................................................................................... 6

Target groups and required competencies.......................................................................................... 6

Availability of the manual....................................................................................................................... 6

Related documents ................................................................................................................................. 6

Explanation of symbols in this document ............................................................................................ 7

Terms and abbreviations........................................................................................................................ 7

Safety...................................................................................................................8

Safety - general ........................................................................................................................................ 8

Electrical safety ........................................................................................................................................ 8

Residual risks ........................................................................................................................................... 8

Installation............................................................................................................................................ 9

Troubleshooting................................................................................................................................... 9

Product description.........................................................................................10

Functions and intended use.................................................................................................................10

Transport and storage ....................................................................................11

Dimensions ............................................................................................................................................11

Contents of the package.......................................................................................................................11

Conditions during transport and storage........................................................................................... 11

Installation - positioning the unit...................................................................12

Location and environmental conditions............................................................................................. 12

Basic facility requirement.....................................................................................................................12

Positioning the unit ............................................................................................................................... 12

Installation - electrical part.............................................................................13

Electrical connection ............................................................................................................................. 13

Commissioning ................................................................................................13

Preparations ..........................................................................................................................................13

Commissioning ......................................................................................................................................13

Operation..........................................................................................................13

Taking out of operation ..................................................................................14

Troubleshooting...............................................................................................14

Troubleshooting - general ....................................................................................................................14

Maintenance and repair .................................................................................15

Disposal of waste equipment ........................................................................16

Appendices .......................................................................................................17

FS Cradle – Installation manual – 1.2 5

EC Declaration of Conformity ..............................................................................................................17

Technical specifications ........................................................................................................................ 18

Priva B.V.

6 FS Cradle – Installation manual – 1.2

About this manual

Aim and scope

This manual concerns the FS Cradle, a docking and recharging module for use with the FS Reader

in the horticulture industry.

This manual contains all of the information required to safely and correctly transport, install,

commission and maintain the FS Cradle. This manual will also allow you to effectively observe

and resolve any malfunctions.

For the sake of simplicity this manual uses the term "unit", to refer to "FS Cradle”.

Target groups and required competencies

Target group

Tasks and responsibilities

Training, knowledge and experience

required

Installers/

service engineers

The unit:

•Transportation

•Positioning

•Installation

•Commissioning and set

•Testing after initial

commissioning and

problem solving

•Operation

•Annual checks

•Disposal of the unit at the

end of the service life

•technical training in the field of

electrical engineering

•experience with electrical

installations for the horticulture

industry

•Priva product specific training

•command of (technical) English

Availability of the manual

This manual is exclusively intended for installers and service engineers.

For employees who operate and monitor the unit, the operating manual and any other

relevant manuals (such as the software manual of the FS Production registration system)

must be available at the workplace.

Related documents

FS Reader Software – User manual

FS Concentrator – Installation and service manual

FS Cradle – Installation manual – 1.2 7

Explanation of symbols in this document

Safety warning: danger of physical injury or damage to the product, the installation or the

environment.

Caution (instruction to prevent problems or material damage)

Information

Tip

Terms and abbreviations

The list below states the abbreviations and terms relating to the Priva labour and

production registration units of FS Performance. Therefore, abbreviations and

terms that do not apply to your specific unit and as a result are not used in this

manual may still be found in the list below.

Abbreviation / term

Explanation

FS Reader

Handheld device for registration of labour

FS Cradle

Storage/charger for the handheld device for registration of labour

FS Tag

Electronic label for the labour registration system

FS Concentrator

Wireless access point for the labour registration system

FS Router

Wireless repeater for the labour registration system

FS Reader Software

Supporting software for handheld devices for registration of labour

Priva B.V.

8 FS Cradle – Installation manual – 1.2

Safety

Safety - general

•Only Priva approved installers/service engineers who have received product-specific training from

Priva are allowed to install, configure, repair and, if necessary, alter the equipment

•Making alterations to the safeguards and safety icons on the equipment is prohibited.

•Both the installer/service engineer and the user must check and maintain the equipment (the

safeguards in particular) in accordance with the instructions in this manual. Keep the product clean

and the surroundings tidy.

•Report faults or damage to Priva immediately. Inactivate the equipment and do not use it if a

deficiency is observed.

•Only use original spare parts for repairs (refer to the price list).

•After repairing the unit, check the correct status and functioning of it.

•If the user allows personnel to operate the equipment, he must provide sufficient instruction. In

particular, this should be on the safety risks and safety instructions as stated in this manual. He

must also supervise correct compliance with the instructions.

•Ensure that the personal protective equipment prescribed in this manual is available and that it is

used.

•Display the safety icons that are applicable in the room where the equipment is set up.

Electrical safety

The unit is powered from the mains voltage. There is a potential hazard of electrocution or fire

resulting from a short circuit. Therefore, comply with the following safety instructions:

•Keep the housings of electrical components (cabinet, pump etc.) closed.

•Keep the electrical parts dry.

•Ensure that the grounding is correctly connected.

•Ensure that the unit is connected to its own fuse group with the correct fuses/circuit breakers.

During installation or maintenance, or while resolving malfunctions it may be necessary to open

the housing of the electrical components. In this case, comply with the following safety

instructions:

•Make sure there is no voltage on the unit by removing the plug from the socket outlet, or by

removing fuses / disconnecting circuit breakers.

•If the unit cannot be made free of electricity, then take extreme care. Use well-insulated tools and

do not touch wire ends, connections and electrical components with bare hands. Keep the

surroundings dry and ensure that there is someone close by to keep an eye on you.

•Wear a grounded wristband while working in the cabinet. Static electricity can damage the

electronic components.

Residual risks

The following risks could not be excluded in the design:

•If the unit is altered or is used in such a way that it becomes contrary to the instructions in this

manual, unforeseen risks may occur.

FS Cradle – Installation manual – 1.2 9

Installation

Only Priva approved installers are allowed to install and configure the product.

Troubleshooting

In case of problems, in most cases a message will be generated. This manual describes the

problems you might be able to solve yourself.

Priva B.V.

10 FS Cradle – Installation manual – 1.2

Product description

The FS Cradle is part of the labour and production registration system of Priva FS

Performance.

The FS Cradle has several functionalities, of which the most important is serving as docking

and charging station for the FS Readers. One FS Cradle can contain up to 10 FS Readers.

Functions and intended use

Functions

The FS Cradle should be used to activate new FS Readers that will be operated for the first

time. Placing the FS Reader in the FS Cradle triggers the FS Reader:

•To awake from its ‘transport mode’.

•To pick up wireless communication that can be understood; this allows the FS

Reader to select the correct frequency used for the wireless communication.

•To get its battery fully charged.

•And, if the FS Reader has been registered already:

oThe FS Reader will switch to the ‘Linked’ status.

oThe internal clock will be synchronised.

oThe latest firmware version will be loaded if this is different from the pre-

loaded firmware version in the FS Reader.

The FS Cradle serves, most importantly, as the charging station for the FS Readers. When the

FS Reader is placed in the FS Cradle, it will automatically start charging its battery.

Finally, the FS Cradle serves as a docking station for FS Readers not in use. As such, it

provides a platform in which the FS Readers can be placed so that any remaining

registrations in the FS Reader will be uploaded automatically and necessary updates to the

firmware of the FS Readers can take place.

Intended use

The FS Cradle is intended to be located in a central place where employees start or gather in

the morning or end the working day, to ensure easy access for employees. The unit should

be placed in a highly visible location, again for easy access.

The intended practical use of the FS Cradle is to provide a platform on which employees can

leave and charge their FS Readers after they finished working. They will then take the FS

Readers from the FS Cradle when they start working again.

Tabla de contenidos

Manuales populares de Estación de acoplamiento de otras marcas

Sony

Sony Dream Machine XDR-DS12iP Manual de usuario

Acer

Acer USB Type-C Dock II Manual de usuario

ATEN

ATEN UC-2000 Manual de usuario

Xcellon

Xcellon HDD-202 Manual de usuario

Dok

Dok CR09 Manual de usuario

Philips

Philips BTM630/12 Manual de usuario

IOGear

IOGear Travel Pro GUD3C09 Manual de usuario

RKI

RKI SDM-E2 Manual de usuario

iHome

iHome iP15 Manual de usuario

VITURE ONE

VITURE ONE MOBILE DOCK Manual de usuario

Lindy

Lindy 42984 Manual de usuario

CipherLab

CipherLab 8001 Manual de usuario

Pyle

Pyle PIPDSP2 Manual de usuario

Avol

Avol AS2350 Manual de usuario

Datalogic

Datalogic JoyaTouch Manual de usuario

Philips

Philips DC190/79 Manual de usuario

Targus

Targus DOCK315EUZ Manual de usuario

Akasa

Akasa DuoDockX3 AK-DK08U3-BK Manual de usuario