Prince Castle DCFT-BKCE Manual de usuario

Dual Continuous Feed Toaster

DCFT-BKCE/DCFT-BKCEUK

Original Instructions

Operation Manual

Product Identification

Platen

Conveyors

Control Panel

On/Off Switch

Compression

Adjustment

Knobs

LCD

Display

INFORMATION

Button

PRINCE CASTLE

Logo Button

UP and DOWN

Scroll Buttons

MODE

Button

LIMITED WARRANTY

This product is warranted to be free from defects in material and/

or workmanship for a period of one (1) year from date of original

installation, not to exceed 18 months from date of shipment from

our factory. Any part or component which proves to be faulty in

material and/or workmanship within the warranty period will be

replaced or repaired (at the option of Prince Castle, Inc.) without

cost to the customer for parts or labor.

This warranty is subject to the following exceptions/conditions:

• Use of any non-genuine Prince Castle parts voids this

warranty and all work must be performed by an authorized

Prince Castle Service Agent.

• All labor shall be performed during regular work hours.

Overtime premium will not be covered.

• Travel charges are limited to 100 miles (200 kilometers) round

trip, 2 hours travel time, one trip per repair.

• Damage caused by carelessness, neglect, and/or abuse (e.g.,

using wrong current, dropping, tampering with or altering

electrical components, or improper cleaning) is not covered.

• Equipment damaged in shipment, by fire, flood or an act of

God is not covered.

• Damage to non-stick coated surfaces is not covered by this

warranty.

TABLE OF CONTENTS

Product Identification ............................... 1

Safety Information ................................. 2

General ......................................... 2

Important ........................................ 2

Electrical Specifications ............................ 2

Installation ....................................... 2

Operation ....................................... 4

Management Programming .......................... 5

Programming Diagram ............................. 7

Daily Planned Maintenance .......................... 8

Troubleshooting ................................... 10

Exploded View and Parts List ........................ 11

Wiring Diagram ................................... 12

355 East Kehoe Blvd. • Carol Stream, IL 60188 USA

Telephone: 630-462-8800 • Toll Free: 1-800-PCASTLE

Fax: 630-462-1460 • www.princecastle.com

Dual Continuous Feed Toaster

DCFT-BKCE/DCFT-BKCEUK

Safety Information

Indicates information important to the proper operation of

the unit. Failure to observe may result in damage to the

equipment and/or severe bodily injury or death.

Indicates information important to the operation of the unit.

Failure to observe may result in damage to the equipment.

WARNING

CAUTION

General

This appliance is designed for toasting bread products in a

commercial kitchen. The dimensions of the bread products are

defined by customer.

Important

Prince Castle reserves the right to change specifications

and product design without notice. Such revisions do not

entitle the buyer to corresponding changes, improvements,

additions or replacements for previously purchased

equipment.

Electrical Specifications

200-240V, 50/60 Hz, 2150-3100W Single Phase

Installation

Unpack and inspect. Remove the unit from the

carton and inspect for signs of damage. If there is

damage to the unit:

• Notify the carrier within 24 hours of delivery.

• Save carton and packaging materials for inspection

purposes.

• Contact your local dealer, or if purchased directly,

the Prince Castle Sales Department at

1-800-722-7853 or 630-462-8800 to arrange for a

replacement unit.

Verify parts. Verify that all parts have been received:

• Dual Continuous Feed Toaster with two conveyors.

• Release Sheet Kit.

• Conveyor adjustment tool.

Place toaster on flat surface. Remove blue and/or

white protective covering.

Two man lift, unit weight >100 lbs (45 kg).

CAUTION

Remove packing. Remove the cardboard spacer

holding the conveyors up for shipping.

Equipment must be elevated from the floor at all times

during cleaning and operation.

CAUTION

Remove bun

infeed by lifting

from toaster.

Dual Continuous Feed Toaster

DCFT-BKCE/DCFT-BKCEUK

Installation (continued)

Install release

sheet. Place

Teflon®release

sheet over the

platen.

6Plug unit in. Plug

unit into a grounded

receptacle with a

matching plug

configuration.

All electrical connections must be in accordance

with local electrical codes and any other

applicable codes.

This appliance can be used by children aged from

8 years and above and persons with reduced

physical, sensory or mental capabilities or lack of

experience and knowledge if they have been given

supervision or instruction concerning use of the

appliance in a safe way and understand the

hazards involved. Children shall not play with the

appliance.

WARNING

Dual Continuous Feed Toaster

DCFT-BKCE/DCFT-BKCEUK

Operation

Turn unit ON. Turn the

On/Off switch located

opposite the display

panel to ON. The

Prince Castle DCFT

screen will appear in

the LCD display for

3 seconds.

Wait through Warm-

Up. During warm-up,

the LCD display will

read “STATUS” and

“WARMING…”.

Warm-Up time is about

10-15 minutes.

status

warming...

BURN/ELECTRICAL SHOCK HAZARD! Platen

sections are HOT and can cause severe burns or

severe shock. Keep hands and objects out of the

toaster unit! Failure to exercise caution may result

in serious injury! Turn the unit off, unplug it and let

it cool down completely before touching or

working on internal apparatus.

Watch for READY

status. When ready

temperature is reached,

the LCD display will

read “STATUS” and

“READY”.

WARNING

status

ready

View temperature, if

desired. Pressing

the INFORMATION

button once will

display the platen

actual temperature.

Pressing a second

time will return the

LCD display to the

READY screen.

status

ready

Choose the

compression

adjustments. Dial the

two front compression

adjustment knobs for

the product part

(Regular Crown, etc.)

that you will be toasting

in the front of the unit.

Dial the two rear

compression

adjustment knobs for

the product part

(Regular Heel, etc.)

that you will be toasting

in the rear of the unit.

Rear

Compression

Adjustment

Knob

Front

Compression

Adjustment

Knob

Begin continuous

feeding. Feed

product into top of

DCFT, sending the

correct product parts

down the front and

rear of the unit. The

sides to be toasted

should face the

platen. Toasted

product will exit

at the base of

the DCFT.

Dual Continuous Feed Toaster

DCFT-BKCE/DCFT-BKCEUK

Management Programming

Enter program screens.

Press and hold the PRINCE

CASTLE logo button for 6

seconds. The

PROGRAMMING VERSION

screen will appear in the

LCD display for 10 seconds.

From the PROGRAMMING

VERSION screen, you may:

A. Press the DOWN scroll

button once to choose

Fahrenheit or Celsius.

B. Press the DOWN scroll

button twice to adjust

temperature.

C. Press the DOWN scroll button three times to

change language.

D. Press the PRINCE CASTLE logo button or leave

the controls inactive for 10 seconds to exit

programming.

Status

ready

Choose Toast Time. From

the PROGRAMMING

VERSION screen, press the

DOWN scroll button once.

From the TOAST TIME

screen that appears, press

the MODE button.

A. From the TOAST TIME

screen that appears, use

the UP and DOWN scroll

buttons to select TIME.

B. Accept the new time by

pressing the MODE

button to return to the

TOAST TIME screen.

NOTE: To return without

accepting the new

setting, press the

PRINCE CASTLE logo

button.

TOAST

TIME

TOAST TIME

12 S

TOAST TIME

12 S

Choose Fahrenheit or

Celsius. From the

PROGRAMMING VERSION

screen, press the DOWN

scroll button once. From the

SELECT F/C screen that

appears, press the MODE

button.

A. From the SET F/C

screen that appears, use

the UP and DOWN scroll

buttons to select TEMP =

F (Fahrenheit) or TEMP

= C (Celsius).

B. Accept the new scale by

pressing the MODE

button to return to the

SELECT F/C screen.

NOTE: To return without

accepting the new

setting, press the

PRINCE CASTLE logo

button.

select

f/c

set f/c

temp c

set f/c

temp F

Dual Continuous Feed Toaster

DCFT-BKCE/DCFT-BKCEUK

Management Programming (continued)

Adjust set point

temperature. From the

SELECT F/C screen, press

the DOWN scroll button.

From the SELECT PLATEN

TEMPERATURE screen,

press the mode button.

A. From the SET PLATEN

screen that appears,

adjust the platen set

point temperature using

the UP and DOWN scroll

buttons.

B. Accept the new platen

setting by pressing the

MODE button to return to

the SELECT PLATEN

TEMPERATURE screen.

NOTE: To return without

accepting the new

setting, press the

PRINCE CASTLE logo

button.

select platen

temperature

set platen

temp 540f

set platen

temp 539f

4Change language. From

the SELECT PLATEN

TEMPERATURE screen,

press the DOWN scroll

button. From the SELECT

LANGUAGE screen, press

the MODE button.

A. From the LANGUAGE

screen that appears, use

the UP and DOWN scroll

buttons to select a

different language.

B. Accept the new language

by pressing the MODE

button to return to the

SELECT LANGUAGE

screen. NOTE: To return

without accepting the

new setting, press the

PRINCE CASTLE logo

button.

select

language

english

language

french

Exit programming.

Press the PRINCE

CASTLE logo button

from the SELECT F/

C, SELECT PLATEN

TEMPERATURE or

SELECT LANGUAGE

screen or leave the

controls inactive for

10 seconds.

select

f/c

Temperature Factory Presets New Setting

Platen 540°F/283°C

Toast Time 12 sec.

Dual Continuous Feed Toaster

DCFT-BKCE/DCFT-BKCEUK

Programming Diagram

programming

version

1.00

Press

(6 secs)

select

f/c

select platen

temperature

set platen

temp 540F

set f/c

temp f

select

language

english

language

spanish

language

french

TOAST

TIME

TOAST TIME

12 S

Press

(6 secs)

Press Press

Press or

Press

Press to change to F or C

Press

Press to change temp

Press to change time.

Dual Continuous Feed Toaster

DCFT-BKCE/DCFT-BKCEUK

Daily Planned Maintenance

BURN/ELECTRICAL SHOCK HAZARD! Platen sections

are HOT and can cause severe burns or severe shock.

Keep hands and objects out of the toaster unit! Failure

to exercise caution may result in serious injury! Turn

the unit off, unplug it and let it cool down completely

before touching or working on internal apparatus.

If the supply cord is damaged, it must be replaced by

the manufacturer, its service agent, or similarly

qualified person to avoid a hazard.

Do not immerse toaster in water. Do not clean with a

water hose or jet spray. Do not use abrasive cleaners,

pads or tools on the platen or the release sheet. Failure

to exercise caution will result in damage to the unit and

will not be covered by warranty. Cleaning and user

maintenance shall not be made by children without

supervision.

WARNING

CAUTION

Gather cleaning materials. You will need a clean,

damp cloth, soft bristle brush, neoprene gloves,

lukewarm soap and water, and non-abrasive cleaner.

Turn DCFT OFF. Tu r n

the On/Off switch

located opposite the

display panel to OFF.

Unplug and let

cool. Allow platen to

cool for 60 minutes

before cleaning. The

plug removed from

the outlet shall

remain clearly

visible to the

operator during the

maintenance procedure.

Open doors.

Clean inside of

doors with damp

cloth.

Remove the

release sheet.

Lay the release

sheet on a flat

surface.

Clean the

conveyors. Put

on neoprene

gloves. Wipe the

conveyors with a

damp cloth. Use a

soft bristle brush

as necessary.

Dual Continuous Feed Toaster

DCFT-BKCE/DCFT-BKCEUK

Daily Planned Maintenance (continued)

Clean the release sheet. Dampen a clean cloth

with lukewarm soap and water. Wipe down both

sides of the release sheet, making sure all built-up

sugar is removed. Allow to air dry. NOTE: Rotate

sheets daily for longer life. Depending on volume of

product toasted, sheets should be replaced every

4 to 6 weeks.

Clean outside of the DCFT. Dampen a clean cloth

with lukewarm soap and water. Wipe down the outside

of the entire DCFT. Wipe down the entire DCFT again

with a fresh clean, sanitized towel.

Close conveyor

doors.

Dual Continuous Feed Toaster

DCFT-BKCE/DCFT-BKCEUK

BURN/ELECTRICAL SHOCK HAZARD! Platen is HOT and can cause severe burns or severe shock.

Keep hands and objects out of the toaster unit! Failure to exercise caution may result in serious injury!

Turn the unit off, unplug it and let it cool down completely before touching or working on internal apparatus. The plug removed

from the outlet shall remain clearly visible to the operator during the maintenance procedure.

Troubleshooting

WARNING

PROBLEM POSSIBLE CAUSE SOLUTION

Unit has no power Unit unplugged Plug unit in.

Breaker tripped Reset breaker.

High limit Call for service (888-375-2938).

Loose connection on power switch Call for service (888-375-2938).

Inoperable power switch Call for service (888-375-2938).

Unit will not heat up Loose connection on platen Call for service (888-375-2938).

Open platen Call for service (888-375-2938).

Loose connection to the main control board Call for service (888-375-2938).

Inoperable main control board Call for service (888-375-2938).

Inoperable SS Relay Call for service (888-375-2938).

Unit heats up, but the conveyor

does not run

Inoperable motor Call for service (888-375-2938).

Stripped drive gear Call for service (888-375-2938).

Stripped conveyor gear Call for service (888-375-2938).

Jammed conveyor assembly Call for service (888-375-2938).

Inoperable drive train Call for service (888-375-2938).

Not toasting properly (under- or

over-done)

Inoperable t-probe Call for service (888-375-2938).

Improper set point Adjust set point in programming (see Management

Programming section).

Improper compression Adjust compression (see Operation section).

Torn or soiled release sheet Clean or replace release sheet.

Bad platen Call for service (888-375-2938).

Jumpy display Improper ground Call for service (888-375-2938).

Blank display Inoperable display Call for service (888-375-2938).

Inoperable main control board Call for service (888-375-2938).

Loose wiring harness Call for service (888-375-2938).

Relay shorted Loose wiring harness Call for service (888-375-2938).

Este manual sirve para los siguientes modelos

Otros manuales de Tostadora de Prince Castle

Prince Castle

Prince Castle 212-GFCCE Manual de usuario

Prince Castle

Prince Castle TX-208BK Manual de usuario

Prince Castle

Prince Castle DCFT-MCD Series Manual de usuario

Prince Castle

Prince Castle DCFT-MCD Series Manual de usuario

Prince Castle

Prince Castle DCFT-MINI-MCD Series Manual de usuario

Prince Castle

Prince Castle 297-T12 Manual de usuario

Prince Castle

Prince Castle 340-TCE Manual de usuario

Prince Castle

Prince Castle DCFT-MCD Manual de usuario

Prince Castle

Prince Castle DCFT-MCD Series Manual de usuario

Prince Castle

Prince Castle CBT-SB-NA-1PS Manual de usuario

Prince Castle

Prince Castle CTD Manual de usuario

Prince Castle

Prince Castle 247-ACC Manual de usuario

Prince Castle

Prince Castle TX-230BKCE Manual de usuario

Prince Castle

Prince Castle TX-208 Manual de usuario

Prince Castle

Prince Castle DCFT-BKM Manual de usuario

Prince Castle

Prince Castle 464-B Manual de usuario

Prince Castle

Prince Castle 454-B Manual de usuario

Prince Castle

Prince Castle Excalibur 197-FCE Manual de usuario

Prince Castle

Prince Castle IRT-SB-NA-1PS Manual de usuario

Prince Castle

Prince Castle 428 Series Manual de usuario

Prince Castle

Prince Castle CTS-W Manual de usuario

Prince Castle

Prince Castle DCFT-BKCE Guía de configuración

Prince Castle

Prince Castle IRT-SB-NA-1PS Manual de usuario

Prince Castle

Prince Castle 428-3B Manual de usuario

Manuales populares de Tostadora de otras marcas

Taurus

Taurus ARCTIC 960648 Manual de usuario

Redfox

Redfox TO 920 G Manual de usuario

Moulinex

Moulinex LS340D11 Manual de usuario

Amica

Amica TD 3021 Manual de usuario

Electrolux

Electrolux EAT978 Manual de usuario

SEVERIN

SEVERIN SA 9275 Manual de usuario

Breville

Breville the Big One BTS100 Manual de usuario

Sunbeam

Sunbeam TA2540 Manual de usuario

ARENDO

ARENDO 305716 Manual de usuario

Life

Life Crispy AT-001 Manual de usuario

Beko

Beko TAM 6201 I Manual de usuario

Zephir

Zephir ZHC485 Manual de usuario

H.Koenig

H.Koenig TOS9 Manual de usuario

ZIEGELMULLER

ZIEGELMULLER Ritter ET 10 Guía del producto

HURAKAN

HURAKAN HKN-TOP3 Manual de usuario

Philips

Philips HD2565 Manual de usuario

Bosch

Bosch DesignLine Plus TAT4P44 GB Series Manual de usuario

Panasonic

Panasonic NT-ZP1-V Manual de usuario