PRC-Saltillo AeroSwitch F18204 Manual de usuario

AeroSwitch™

A Universal Bluetooth Switch

18660

Version 1.02

with inclusion of copyright noce. Commercial use prohibited; may not be used for resale.

Contact PRC-Salllo for quesons regarding permissible uses.

AAC Coaching Corner™, AAC Language Lab®, AAC Learning Journey™, Accent®, AeroSwitch®,

AeroText™, ChatEditor™, ChatFusion™, ChatPoint™, ChatSMS®, ChatWrap®, CoreScanner™,

Dialogue®, Empower®, Engage®, Essence®, Freedom Switch™, iSharePRC®, LAMP™, LAMP

Words for Life®, Look®, Minspeak®, NovaChat®, NuEye®, NuPoint®, NuVoice®, PASS™, PRiO®,

Realize Language™, Semanc Compacon®, Timocco-on-Accent™, TouchChat®, UNIDAD®,

Unity®, Via®, VersaChat™, and VocabPC™ are trademarks of PRC-Salllo. The Bluetooth®

word mark and logos are registered trademarks owned by the Bluetooth SIG, Inc. and

any use of such marks by PRC-Salllo is under license. iOS® is a trademark or registered

trademark of Cisco in the U.S. and other countries and is used under license. Android™ is a

trademark of Google Inc. Velcro® is a registered trademark of Velcro BVBA.

Document Version

18660 Version 1.02 ∙ 12/07/2022 ∙ Applies to model F18204

Contact Informaon

MANUFACTURER EU AUTHORISED REPRESENTATIVE EU IMPORTER

Prentke Romich Company

1022 Heyl Rd

Wooster, OH 44691

USA

Tel.: +1 330 262-1984

+1 800 262-1984

Fax: +1 330 262-4829

Email: info@prentrom.com

Web: www.prc-salllo.com/

Prentke Romich GmbH

Karthäuserstr. 3

D-34117 Kassel

Germany

Tel.: +49 (0) 561 7 85 59-0

Fax: +49 (0) 561 7 85 59-29

Email: info@prentke-romich.de

Web : www.prentke-romich.de/

Prentke Romich GmbH

Karthäuserstr. 3

D-34117 Kassel

Germany

Tel.: +49 (0) 561 7 85 59-0

Fax: +49 (0) 561 7 85 59-29

Email: info@prentke-romich.de

Web : www.prentke-romich.de/

UK RESPONSIBLE PERSON AND IMPORTER AUTHORISED REPRESENTATIVE IN AUSTRALIA

Liberator Ltd

“Whitegates”, 25-27 High Street

Swinstead, Lincolnshire NG33 4PA

Tel.: +44 (0) 1733 370 470

Fax: +44 (0) 1476 552 473

Email: info@liberator.co.uk

Web: www.liberator.co.uk/

Liberator Ltd

Level 4, 2-4 Holden Street, Asheld, NSW, 2131

Australia

Tel: +61 (0) 8 8211 7766

Fax: +61 (0) 8 8211 7733

Email: info@liberator.net.au

Web: www.liberator.net.au/

AEROSWITCH

The AeroSwitch® is a wireless switch that can be used to control electronic

speech generang devices. It has two ports that allow for the connecon of wired

switches (mono or dual). A rotary dial allows you to set up opons for sending in

broadcast mode or keyboard mode.

TURNING THE AEROSWITCH ON

Slide the power switch to the on posion*. The blue LED will ash to indicate the

remaining baery charge. You may need to wait a few seconds before the LED

begins to ash.

Number of Flashes Remaining Baery Charge

4 ashes 76% - 100%

3 ashes 50% - 75%

2 ashes 25% - 49%

1 ash Less than 25%*

1 very short ash Less than 10%*

* Consider geng a replacement baery

* To turn the AeroSwitch on, slide the power switch to . To turn the AeroSwitch

o, slide the power switch to .

DECIDING ON BROADCAST MODE OR KEYBOARD MODE

The AeroSwitch has two connecon opons: Broadcast mode and keyboard

mode. The switch ships in broadcast mode. There are two deciding factors that

determine if Broadcast or Keyboard mode is used.

• If you are scanning inside and out of the app or just within the app

• Which device you are using

Not all devices are compable with Broadcast mode. See the chart in the next

secon, “Seng the Switch Mode”.

BROADCAST MODE KEYBOARD MODE

Limited to scanning WITHIN the

communicaon soware (NuVoice®,

Empower®, Chat soware)

Able to run scanning both WITHIN and

OUTSIDE the communicaon soware.

Longer baery life (1-3 years, depending

on use)

Shorter baery life (2-3 months,

depending on use)—replace with

rechargeable baeries

If you have a choice between broadcast

and keyboard mode AND want to stay

strictly within the communicaon so-

ware, this is the beer opon.

If you have a device that’s not

compable with broadcast mode

AND/OR want to use the switch outside

the communicaon soware, this is the

beer opon.

SETTING THE SWITCH MODE

Set the AeroSwitch rotary dial to broadcast mode or keyboard mode, using the

following guidelines.

Device Broadcast Keyboard

Accent® 800-40

Accent 1000-40

Accent 1400-30

Accent 800-30

Accent 1000-30

ChatFusion™ 10

NovaChat® 5 · 3rd generaon

Device Broadcast Keyboard

NovaChat 5 · 4th generaon

NovaChat 8 · 2nd generaon

NovaChat 8 · 3rd generaon

NovaChat 10 · 5th generaon

NovaChat 10 · 6th generaon

NovaChat 10 · 7th generaon

NovaChat 12

TouchChat® Express 8.2

TouchChat Express 10.2

Via® Pro

Via Mini

Other devices with Bluetooth® 4.1 and higher

USING THE ROTARY DIAL

Use the 10-posion rotary dial on the boom of the

AeroSwitch to change the switch mode. A small screw-

driver is included to adjust the rotary dial.

If a keyboard mode is selected, the switch essenally

sends that specied keystroke (for example, “one” or

“enter”) to the communicaon device.

0-Broadcast

1-Broadcast

2-Broadcast

3-Keyboard = Space

4-Keyboard = Enter

5-Keyboard = One

6-Keyboard = Two

7-Keyboard = Tab

8-Keyboard = Le-click

9-Keyboard = Right-click

Important! Aer you change the switch mode, turn the AeroSwitch o and

back on.

If you are using mulple AeroSwitches in a common area:

If you are using mulple AeroSwitches in a common area, you will want to

make sure they are set to dierent modes to ensure there is no interference.

For example, John and Doug are in the same classroom. John could be using an

Accent 1400-30 in Broadcast mode 0 and Doug could be using a NovaChat 10.7 in

Broadcast mode 1.

Setting up an Accent Device in Broadcast Mode

1. Ensure the AeroSwitch is turned o.

2. Set the rotary dial to broadcast mode 0.

3. Turn the AeroSwitch on.

4. If your Accent device is running NuVoice soware:

• Go to the Toolbox and select Access Method Menu.

• If switch scanning is not already selected, select Choose Dierent Access

Method, select 1 Switch or 2 Switch, and select a specic switch

scanning method.

• From the Access Method Menu, select Connect AeroSwitch.

5. If your Accent device is running Empower soware:

• Select Menu > Toolbox > System Sengs > Devices & Connecons.

• Select the Switches tab.

• Select the Connect Switch Connect buon. A message will prompt you to

press the switch to pair it.

6. Within 10 seconds: Press and release the AeroSwitch top buon.

7. To connect a second AeroSwitch, set its rotary dial to broadcast mode 1 and

repeat steps 3 through 6.

8. Select OK twice (NuVoice) or Close (Empower).

Note: To set up switch scanning, download the NuVoice Soware Manual or

the Accent User’s Guide available from hps://www.prentrom.com/support

Setting up an Accent Device in Keyboard Mode

1. Ensure the AeroSwitch is turned o.

2. Set the rotary dial to the keyboard mode you’d like to use and turn the

AeroSwitch on.

3. On the device, open the Bluetooth Sengs in Windows.

4. Select Add Bluetooth or other Device.

5. Select Bluetooth.

6. Press and release the AeroSwitch pairing buon. The blue LED must be

blinking to pair the switch. This makes the AeroSwitch discoverable to

your device.

7. On the device, select the AeroSwitch from the list of discoverable devices. You

may need to scroll down in the window to nd it.

8. If you are prompted for a code, enter 000000.

9. Select Connect. You may need to scroll down to nd the Connect buon.

10.Adjust addional switch sengs as needed within the soware.

Setting up a NovaChat or

ChatFusion Device in Broadcast Mode

1. Ensure the AeroSwitch is turned o.

2. Set the rotary dial to the broadcast mode you’d like to use and turn the Aero

Switch on.

3. Choose Menu > Applicaon Sengs > Input > Scanning > Enable Scanning.

4. Choose Switch Access > Switch Conguraon and select One Switch or

Two Switch.

5. Select Switch 1. The prompt “Press any switch” will appear. Press and release

the preferred switch.

6. If you selected Two Switch, select Switch 2 and press and release the second

switch.

Note: To set up switch scanning, refer to the NovaChat User’s Guide or

ChatFusion User’s Guide provided with your device or available from

hps://salllo.com/support/downloads

Note: If you are using an Android 10 or higher device without an amplier

connected, open the Android sengs and turn the Locaon seng On.

Setting up a NovaChat or

ChatFusion Device in Keyboard Mode

1. Ensure the AeroSwitch is turned o.

2. Set the rotary dial to the keyboard mode you’d like to use and turn the Aero

Switch on.

3. On the device, select Menu > Applicaon Sengs > System > Bluetooth

Sengs > Connect to Switch.

4. Press and release the AeroSwitch pairing buon. The blue LED must

be blinking.

5. Select AeroSwitch from the lisng.

6. If you are prompted for a code, enter 000000.

7. Tap Pair.

8. Choose Menu > Applicaon Sengs > Input > Scanning > Enable Scanning

9. Choose Switch Access > Switch Conguraon and select One Switch or

Two Switch.

10.Select Switch 1. The prompt “Press any switch” will appear. Press and release

the preferred switch.

11.If you selected Two Switch, select Switch 2 and press and release the second

switch.

Note: To set up switch scanning, refer to the NovaChat User’s Guide or

ChatFusion User’s Guide provided with your device or available from

hps://salllo.com/support/downloads

If you are using an Android 11 or higher device:

1. Ensure the AeroSwitch is turned o.

2. Set the rotary dial to the keyboard mode you’d like to use and turn the

AeroSwitch on.

3. Press and release the AeroSwitch pairing buon. The blue LED must

be blinking.

4. On the device, open the Android sengs and select Connecons > Bluetooth.

5. Select AeroSwitch from the lisng.

6. If you are prompted for a code, enter 000000.

7. Tap Pair.

Note: To set up switch scanning, refer to the NovaChat User’s Guide or

ChatFusion User’s Guide provided with your device or available from

hps://salllo.com/support/downloads

Setting up a Via Pro, Via Mini,

or TouchChat Express Device

If you are using TouchChat scanning:

Set up your Via Pro or TouchChat Express device in broadcast mode.

1. Ensure the AeroSwitch is turned o.

2. Set the rotary dial to the broadcast mode you’d like to use and turn the Aero

Switch on.

3. In TouchChat HD, choose Menu > Sengs > Input> Scanning and ensure that

Scanning Enabled is selected.

4. Choose Scanning > Congure Switches > Switch Conguraon and select One

Switch or Two Switch.

5. Select Switch 1. The prompt “Press any switch” will appear. Press and release

the switch you want to use.

6. If you selected Two Switch, select Switch 2 and press and release the second

switch.

If you are using iOS scanning:

Set up your Via Pro, Via Mini, or TouchChat Express device in keyboard mode.

1. In the iOS sengs on your device, open the Bluetooth sengs.

2. Ensure the AeroSwitch is turned o.

3. Set the rotary dial to the keyboard mode you’d like to use and turn the Aero

Switch on.

4. Press and release the AeroSwitch pairing buon. The blue LED must

be blinking.

Note: This makes the AeroSwitch discoverable to your device.

5. On the device, select the AeroSwitch in the device’s Bluetooth sengs.

6. If you are prompted for a code, enter 000000.

7. Tap Pair.

Note: To set up switch scanning, refer to the documentaon available for

your device.

Setting up Devices not listed above

1. Open the Bluetooth sengs on your device.

2. Ensure the AeroSwitch is turned o.

3. Set the rotary dial to the keyboard mode you want to use and turn the

AeroSwitch on.

4. Press and release the AeroSwitch pairing buon. The blue LED must

be blinking.

Note: This makes the AeroSwitch discoverable to your device.

5. On the device, select the AeroSwitch In the device’s Bluetooth sengs.

6. If you are prompted for a code, enter 000000.

7. Tap Pair.

8. To connect a second AeroSwitch, set the rotary dial to a dierent keyboard

mode and repeat the steps above.

Note: To set up switch scanning, refer to the documentaon available for

your device.

Waking the AeroSwitch (applies to keyboard mode only)

Aer 30 minutes of no acvaons, AeroSwitch will go to sleep. Press the switch

to wake it up. It will take a few seconds to wake. Your rst switch press might be

missed and need to be repeated.

Using the AeroSwitch with Wired Switches

Important! Before connecng a wired switch, turn the AeroSwitch o.

You can use single or dual wired switches with the AeroSwitch for 2-switch

scanning.

1. Make sure the AeroSwitch is turned o.

2. Plug in the wired switch or any combinaon of single and dual switches into

switch jacks A and B.

3. Turn the AeroSwitch back on.

4. Set up the AeroSwitch as described under the appropriate “Seng up”

secon above.

Disconnecting and/or Unpairing

the AeroSwitch and Device

If you want to use the AeroSwitch with a dierent device, unpair it from the

original device.

Accent Device with NuVoice in Broadcast Mode

1. In NuVoice, go to the Toolbox and select Access Method Menu.

2. Select Disconnect ALL AeroSwitch.

3. Select OK twice.

Accent Device with Empower in Broadcast Mode

1. In Empower, select Menu > Toolbox > System Sengs > Devices &

Connecons.

2. Select the Switches tab.

3. Select the Connect Switch Disconnect all buon. “Do you want to disconnect

all of the switches?” will appear.

4. Select Okay. “Unpairing Switches” will appear. When the message disappears,

the switch has been disconnected.

5. Select Close.

Accent Device with NuVoice or Empower in Keyboard Mode

1. On the device, open the Bluetooth Sengs in Windows.

2. Select the AeroSwitch from the list of devices connected.

3. Select Remove Device and click Yes .

NovaChat or ChatFusion Device

If you connected the AeroSwitch in broadcast mode, you do not need to

disconnect it from the device.

Tabla de contenidos

Otros manuales de Cambiar de PRC-Saltillo

PRC-Saltillo

PRC-Saltillo AeroSwitch Manual de usuario

Manuales populares de Cambiar de otras marcas

URC

URC Total Control MFS-8 Manual de usuario

Azbil

Azbil HPQ-D11 Manual de usuario

Sony

Sony DFS-900M Manual de usuario

SICK

SICK i17S Manual de usuario

F&F

F&F SZR-277 Manual de usuario

Shure

Shure UAMS/BK Manual de usuario

Dräger

Dräger X-zone Switch Off Manual de usuario

Asco

Asco Joucomatic 349 Series Manual de usuario

BT Mini Hub Manual de usuario

D-Link

D-Link DES-1226G Manual de usuario

Johnson Controls

Johnson Controls FS80-C Manual de usuario

Alcatel-Lucent

Alcatel-Lucent 7450 ESS-12 Manual de usuario

MicroNet

MicroNet SP1200A Manual de usuario

Ruijie

Ruijie RG-PF2920 Series Manual de instalación y funcionamiento

Altinex

Altinex DA1914SX Manual de usuario

MiLAN

MiLAN MIL-SM2401M Manual de usuario

RJM

RJM MASTERMIND PBC/6X Manual de usuario

Atlas

Atlas MMK-KVM8 Manual de usuario