POWERCOLOR A350M-SV Manual de usuario
A350M-SV
A350M-SVF
Revision : A
Date : May 04, 2004
Table of Contents
Chapter 1 Overview
Package Checklist .......................................................................... 1-2
The A350M-SV/ SVF/ SVGF Mainboard .................................... 1-3
Main Features ................................................................................ 1-4
Chapter 2 Installation Procedures
1). Set System Jumpers .................................................................. 2-2
Clear CMOS ...................................................................... 2-2
2). Install Memory Modules .......................................................... 2-3
3). Install the CPU .......................................................................... 2-4
Connect ATX Power .......................................................... 2-5
4). Install Expansion Cards ............................................................. 2-6
5). Connect Devices ....................................................................... 2-7
Floppy Diskette Drive Connector ...................................... 2-7
IDE Device Connectors ..................................................... 2-8
Fan Connectors ................................................................. 2-8
Power Connectors ............................................................. 2-9
SPDIF Connector .............................................................. 2-9
Front Panel Block Connector ............................................. 2-10
CD Audio-In Connectors ................................................... 2-11
1394 Connectors ................................................................ 2-11
PS/2 Keyboard and Mouse Connector .............................. 2-12
RJ45 LAN Connector ........................................................ 2-12
Serial Port Connectors ....................................................... 2-13
VGA Connector ................................................................. 2-13
Printer Connector .............................................................. 2-14
Audio I/O Jacks ................................................................ 2-14
Front Audio Connector ..................................................... 2-15
Universal Serial Bus Connectors ....................................... 2-15
TV_OUT Connector (optional) .......................................... 2-16
A350M-SV/ SVF/ SVGF Mainboard Manual
Chapter 3 BIOS Setup
Main Setup .................................................................................... 3-2
Advanced Setup ............................................................................ 3-2
CPU Configuraion ............................................................. 3-5
IDE Configuraion .............................................................. 3-7
Floppy Configuraion ......................................................... 3-9
Super IO Configuraion ...................................................... 3-10
Hardware Health Configuraion .......................................... 3-12
ACPI Configuraion ............................................................ 3-13
USB Configuraion ............................................................. 3-14
PCI/PnP Setup ............................................................................... 3-15
Boot Setup ..................................................................................... 3-17
Boot Setting Configuraion ................................................ 3-17
Boot Device Priority .......................................................... 3-19
Security Setup ............................................................................... 3-20
Chipset Setup ................................................................................ 3-22
North bridge Configuraion ................................................ 3-22
South bridge Configuraion ................................................ 3-25
Power Setup ................................................................................... 3-26
Exit Setup ....................................................................................... 3-27
Chapter 4 Utilities and Software Installation
|||||||||||||
1 - 1
Overview
Chapter 1
RC350
1 - 2
Package Checklist
If you discover a nyite m below was da maged or lost, plea se conta ct your
vendor.
NOTE: The driver CD, which contains patch files, onboard video/
audio chip drivers, related online help and other useful information,
can be found in your mainboard package.
Please install it immediately after your Windows operating system
installation is complete. Place driver CD in the drive and an operat-
ing menu will appear on your monitor. Please select Auto Installation.
It will automatically detect which software tools (patch files, drivers)
the mainboard needs. Press OK to go through the whole installa-
tion procedure in a very straight forward and easy way. It will also
provide you with a custom installation feature to select the patch
files and software drivers you want for the onboard chip’s use.
1 - 3
The A350M-SV/ SVF/ SVGF Mainboard
1 - 4
Main Features
CPU
Intel®Pentium ®4 (Pre scottandNorthwood) proce ssor up to 3.2GHz
- Intel Hyper -Threa ding T echnology
- FSB: 533MHz and 800MHz
Intel®Celeron ®processor
- 400MHz system data bus
CPU Socket
Socket 478
Chipset
North Bridge: ATI ®Radeon RC350
South Bridge: ATI ®SB200
Memory
2 memory sockets:
Support Single cha nnel D DR266/333/400
SDRAM memorysize totally up to 2 GBs
Expansion Slots
1A G P Slot: support 4X/8X (1.5V)
3 PCI Slots: Rev. 2.2 32-bit (3.3V/5V PCI bus interface) slots
LAN
RTL8100C10/100 Fa st Ethernet
RTL 81 10S Giga bit Ethernet (A350M-SVGF model)
Audio Features
Realtek 6 cha nnel AC97 codec
LINE_IN, LINE_OUT, MICROPHONE_IN Jack
Front audio pinhea ders
5.1 cha nnel audio
1 - 5
I/O Ports
2 IDE connectors -
Ultra D M A 66/100 up to 4 device s
COM1 and COM2 (pinheader)
1VG A port
1Parallelport
1 PS/2 mouse and PS/2 keyboard
6 USB ports
Mounting Holes
9 Holes
Mainboard Size
9.6x9.6(unit:inch)
IEEE 1394 Ports (A350M-SVF/ A350M-SVGF model only)
VT6307
2 Ports
1 Bra cket with ca ble (option al)
2 - 1
Chapter 2
Installation Procedures
This mainboard has several user-adjustable jumpers that allow you to configure the
system to suit your requirements. This chapter contains information on the various
jumper settings on your mainboard.
To set up your computer, you must complete the following steps:
Step 1 - Set system jumpers.
Step 2 - Install memory modules.
Step 3 - Install the Central Processing Unit (CPU).
Step 4 - Install expansion cards.
Step 5 - Connect ribbon cables, cabinet wires and power supply.
Step 6 - Set up BIOS software.
Step 7 - Install supporting software tools.
WARNING: Excessive torque may damage the mainboard. When
using an electric screwdriver on the mainboard, make sure that
the torque is set to the allowable range of 5.0 ~ 8.0kg/cm.
Mainboard components contain very delicate Integrated Circuit
(IC) chips. To prevent static electricity from harming any of the
sensitive components, you should follow the following precau-
tions whenever working on the computer:
1. Unplug the computer when working on the inside.
2. Hold components by the edges and try not to touch the IC
||||chips, leads or circuitry.
3. Wear an anti-static wrist strap.
4. Place components on a grounded anti-static pad,or on the bag
that came with the component,whenever the components are
separated from the system.
2 - 2
Clear CMOS
The CMOS RAM is powered by the onboard button cell battery.
To clear the RTC data:
(1) Turn off your computer;
(2) Open the system case and disconnect the ATX power cable;
(3) Place the jumper cap onto the pinpair 2-3 for at least 6 seconds
to enable CMOS clearance;
(4) Place the jumper cap onto the pinpair 1-2 to disable the effect of
CMOS clearance;
(5) Connect the ATX power cable and close the system case;
(6) Turn on your computer until CMOS checksum error appears;
(7) Hold down the Delete key as it boots;
(8) Enter the BIOS Setup to re-enter user preferences.
NOTE: Users are not encouraged to change to jumper settings not
listed in this manual. Changing the jumper settings improperly may
adversely affect system performance.
1.) Set System Jumpers
Jumpers are used to select the operation modes for your system. Some jump-
ers on the board have three metal pins with each pin representing a different
function. A 1is written besides pin 1 on jumpers with three pins. To set a
jumper, a black cap containing metal contacts is placed over the jumper pin(s)
according to the required configuration. A jumper is said to be shorted when
the black cap has been placed on one or two of its pins.
Este manual sirve para los siguientes modelos
2
Tabla de contenidos
Otros manuales de Placa madre de POWERCOLOR
Manuales populares de Placa madre de otras marcas
Telit Wireless Solutions
Telit Wireless Solutions SL869-3DR Manual de usuario
Gigabyte
Gigabyte GA-9IVDT Manual de usuario
Texas Instruments
Texas Instruments ADS8372EVM Manual de usuario
Commell
Commell MS-C73 Manual de usuario
IBT Technologies
IBT Technologies MB860 Manual de usuario
Nvidia
Nvidia TEGRA DG-04927-001_V01 Manual de usuario
