Power Science CF-3K-12 Series Manual de usuario
Series CF(M)-3K-12
Inverter+Charger SuperCombi
Australian Version
Users’GUIDE (Ver. 4.2.1)
Power Science Australia Group Pty Ltd
Jan. 2020
CF-3K-12 SUPERCOMBI USER’S GUIDE
1
Table of Content
1. Safety Instructions........................................................ 3
1.1 General Safety Warnings.....................................................................................................3
1.2 Attentions to the Batteries...................................................................................................3
2. Product Introduction....................................................... 3
2.1 Basic Introduction...............................................................................................................3
2.2 Model Definition.................................................................................................................4
2.3 Application Areas................................................................................................................5
2.4 Dimension and Mounting Holes Chart................................................................................6
2.5 Introduction to the Interfaces of Device..............................................................................6
2.6 Introduction of the Installation Cabin and the Interface definition.....................................7
2.7 Display/Settings Panel Introduction....................................................................................8
2.8 Basic Features.....................................................................................................................9
3. Installation instructions................................................. 10
3.1 Installation environment....................................................................................................10
3.2 System connection diagram..............................................................................................11
3.3 Cabling..............................................................................................................................12
3.4 Match the Battery and the Charge Current........................................................................12
4. Basic Settings............................................................ 13
4.1 Battery Type......................................................................................................................13
4.2 Charge Current..................................................................................................................14
4.3 Grid Limit .........................................................................................................................14
4.4 Auto Invert ........................................................................................................................15
4.5 Floating Charge.................................................................................................................15
5. User’s Guide .............................................................. 15
5.1 Invert.................................................................................................................................15
5.2 Energy Save Mode............................................................................................................16
5.3 AC Charge.........................................................................................................................16
5.4 PV Charge (Optional)........................................................................................................16
5.5 Auto Sleep.........................................................................................................................17
5.6 Turn off the Panel Manually..............................................................................................17
5.7 Emergency Mode..............................................................................................................17
6. Functions................................................................. 18
6.1 Dual AC Outputs...............................................................................................................18
6.2 ChargePro Function(Optional)..........................................................................................18
6.3 Load Priority.....................................................................................................................19
6.4 On-Grid Supply.................................................................................................................19
6.5 Power Support...................................................................................................................19
6.6 Wire Compensation to the Battery Voltage (Optional)......................................................19
CF-3K-12 SUPERCOMBI USER’S GUIDE
2
6.7 Charge the Start Battery (Optional) ..................................................................................19
7. Special Functions......................................................... 20
7.1 Battery Type Customization..............................................................................................20
7.2 Temperature Compensation to the Battery Voltage...........................................................20
7.3 Dead Battery Charging......................................................................................................20
8 Electrical Parameters...................................................... 20
9. Trouble Shooting.......................................................... 22
10. Warranty................................................................. 23
CF-3K-12 SUPERCOMBI USER’S GUIDE
3
1. Safety Instructions
1.1 General Safety Warnings
In order to avoid the malfunction and danger, please do not expose the machine to the
environment such as rain, clouds, mist, dust, high temperature and so on or place it in the
bilge. (For more details, please refer to the 4-2 section of the second chapter “installment
advice”)
Stay away from the fire and welding places. Use good electric conductivity wire with
appropriate length and wire diameter. (For more details, please refer to the wire available
instructions of 3.3) Devices would be damaged and its performance would be reduced if the
wire does not meet the requirement.)
Product contains internal components, which may bring electric arc and sparks. In order to
prevent fire or explosion, it is not allowed to install the machine in the narrow space with
battery or inflammable material. ( including machines powered by gasoline in any space, fuel
tanks or pipe fitting and other components)
1.2 Attentions to the Batteries
When the chemicals inside of the batteries touch the skin or clothing, please wash
immediately with plenty of soapy water.
No smoking or sparks or ignition engine near the batteries.
When using the metal tools, please be care and do not drop it on the batteries. The dropped
metal tools may cause sparks or short circuit and the explosion of battery.
When installing the batteries, please remove metal objects such as rings, bracelets, necklaces,
watches, and so on. The current generated by the short circuit of the battery is very large, and
it is possible to weld and burn the metal, which can cause severe burns.
2. Product Introduction
2.1 Basic Introduction
“The series CF(M)-3K-12 Charging-Inverter-MPPT SuperCombi” (hereinafter referred to as
“SuperCombi”) is independently developed by Power Science Technology Co., LTD.. The power
CF-3K-12 SUPERCOMBI USER’S GUIDE
4
electronic transformation device with high power density, super large charging current is
integrated with charging, inverted and photovoltaic MPPT controller, and is achieved by the
patented bidirectional convert technology:
As a charger, the machine can output an up to 200Ampere charging current;
As an inverter, the pure sine wave is output, which is very fit for the sensitive and motor
loads;
As an MPPT controller, the module is so small that it can be installed inside the machine.All
the resources, including the cable, the screen, the cooling system can be shared;
The Inverter Enhanced Functions of the SuperCombi can dramatically improve the adaptable
ability to large loads; The ChargePro Function of the SuperCombi can make full use of theAC
power from the utility and protect the battery; Hierarchical management and strong and perfect set
up function can be suitable for all kinds of users’ habits, and provide great convenience for users.
The SuperCombi is applicable to vehicle, marines and Energy Storage System etc.
2.2 Model Definition
The model format of the series products is defined as follow:
CF M -3K-12-200A - D -100 -A C N C G P R T B Y -001
* a b # ②③④⑤⑥⑦⑧⑨⑩(11) (12) (13)
Table 1: ModelDefinition
No.
Spec.
Values
*
Solar Panel MPPT Module
M: With MPPT module
Empty: Without MPPT module
a
Invert Power
2K: 2000W; 3K: 3000W
b
Max. Charge Current
200: 200A/150: 150A/100: 100A
135: 135A/100: 100A/60: 60A
0: 0A(Only Inverter, not Combi)
#
AC Outputs
D: Double Outputs. Find more in 6.1 Dual AC Outputs.
Empty: Single Output
②
Actual Max. Charge Current
If a=2K Then Empty
If a=3K Then
100: 100 Amperes
150: 150 Amperes
Empty: 200 Amperes
③
Country Code
A: Australia
④
Invert AC Voltage
A: 220Vac / B: 230Vac / C: 240Vac
⑤
Charge function
Empty: With Charge Function
N: Without Charge Function
⑥
ChargePro Function
C: With ChargePro Function. Find more in 6.2 ChargePro
Function (Optional)
CF-3K-12 SUPERCOMBI USER’S GUIDE
5
Empty: Without ChargePro Function
⑦
Invert Enhanced Function
G: With On-Grid Supply Function. Find more in 6.4
On-Grid Supply.
S: With Power Support Function. Find more in 6.5 Power
Support.
Empty: Without any Invert Enhanced Function
⑧
Work in Parallel
P: The SuperCombis can work in Parallel
Empty: Without Work in Parallel Function
⑨
Wire Compensation
R: With Wire Compensation Function. Find more in 6.6
Wire Compensation to the Battery Voltage (Optional)
Empty: Without Wire Compensation Function
⑩
Temperature Compensation
T: With Temperature Compensation Function. Find more
in Temperature Compensation to the Battery Voltage.
Empty: Without Temperature Compensation Function
(11)
To Charge the Start Battery
B: With the function of Charging the Start Battery. Find
more in 6.7 Charge the Start Battery (Optional)
Empty: Without the function of Charging the Start Battery
(12)
Color
Empty: Green
Y: Orange
(13)
Customer Number
3 Digitals: Customized for the special customer
Empty: Standard Product
2.3 Application Areas
Electric Tools: round saws, electric drills, grinder, buffers, weeding machine, air
compressors.
Office equipment: computer, printer, display, fax machine, scanner
Household products: Fixed frequency, inverter air conditioner, hair dryer, vacuum cleaner,
fan, fluorescent lamp, incandescent lamp, electric razor, electric sewing machine.
KitchenAppliance: Coffee maker, mixer, ice maker, toaster.
Industrial equipment：Metal halide lamp, high pressure sodium lamp.
Home entertainment electronic goods: TV, recorder, video games, audio, musical instruments,
satellite equipment.
CF-3K-12 SUPERCOMBI USER’S GUIDE
6
2.4 Dimension and Mounting Holes Chart
The maximum size of the SuperCombi is 386*262*83.1, and there are six symmetrical mounting
holes on both sides with a diameter of 5.5mm. The specific dimensions charts are shown as in
Figure 1.
Fig.1. Dimension and Mounting Holes Chart
2.5 Introduction to the Interfaces of Device
User’s installation chart shown as Figure 2:
CF-3K-12 SUPERCOMBI USER’S GUIDE
7
Figure 2 SuperCombi installation surface Chart
Each part is defined as shown in table 2:
No.
Function definition
①
PV Input
②
AC IN/OUT
③
Indicator
④
Black, Sampling of Battery (Optional)
⑤
White, Remote Control
⑥
Charge Port (2A) for Start Battery (Optional)
⑦
Emergency Swith
⑧
Battery
Table 2 All-in-One machine mounting surface definition table
2.6 Introduction of the Installation Cabin and the Interface
definition
The diagram of the installation cabin is shown as Figure 3.
Figure 3: Diagram of the Installation Cabin
CF-3K-12 SUPERCOMBI USER’S GUIDE
8
2.7 Display/Settings Panel Introduction
Display / settings panel are shown in Figure 4 and 5:
Figure 4: Panel Diagram (Front)
Figure 4: Panel Diagram (Back)
In which:
(1) Menu
(10) Dial Switch for Auto Invert/Floating Charge
CF-3K-12 SUPERCOMBI USER’S GUIDE
9
(2) Parameter Unit
(11) PageDown/ Buzzer sound off
(3) PV Indicator
(12) Power On/Off
(4) Working Indicator
(13) Buzzer
(5) Parameter Value
(14) Remote
(6) Rocker Switch (On/Off/Energy Save)
(15) Reserved
(7) Battery Type Selector
(16) Reserved
(8) AC (Grid) Current Selector
(17) QR Code (For Help)
(9) Charge Current Selector
Table 3 Panel definition table
2.8 Basic Features
Pure Sine Wave Output
High Efficiency: The efficiency can be up to 93%
X-small size
Large Charge Current: The Max. Current can be as high as 200A
Surge power can be three times of continuous output
Wide DC Input range: Full Power Output @ battery voltage 10~15V dc, De-rated Power
output @ battery voltage 9~10Vdc
The built-in 32AAC Relay can achieve larger bypass power.
Energy Saving Mode: Ultra-low Loss, standby power consumption can be lower than 10W.
Otros manuales para CF-3K-12 Series
1
Este manual sirve para los siguientes modelos
1
Tabla de contenidos
Otros manuales de Inversor de Power Science
