Power Electronics Freesun String Supervisor SFS08 Manual de lista de piezas

String Supervisor

Getting Started Manual

String Supervisor

Getting Started Manual

Edition: March 2011

FSIM01CI Rev. C

FREESUN SERIES –String Supervisor

POWER ELECTRONICS

SAFETY SYMBOLS

Always follow safety instructions to prevent accidents and potential hazards from occurring.

Edition of December 2010

This publication could present technical imprecision or misprints. The information here included will be

periodically modified and updated, and all those modifications will be incorporated in later editions.

To consult the most updated information of this product you might access through our website

www.power-electronics.com where the latest version of this manual can be downloaded.

WARNING

This symbol means improper operation may results in serious personal

injury or death.

CAUTION

Identifies shock hazards under certain conditions. Particular attention should

be given because dangerous voltage may be present. Maintenance

operation should be done by qualified personnel

Identifies potential hazards under certain conditions. Read the message and

follow the instructions carefully.

Identifies shock hazards under certain conditions. Particular attention should

be given because dangerous voltage may be present.

POWER ELECTRONICS

FREESUN ACCESSORIES –String Supervisor

SAFETY SYMBOLS

Revisions

Date Revision Description

04 / 08 / 2010 A First edition

09 / 12 / 2010 B Update

22 / 03 / 2011 C Updating Technical Characteristics

The equipment and technical documentation are periodically updated. Power Electronics reserves the right to modify all or part of the

contents of this manual without previous notice.

FREESUN SERIES –String Supervisor

POWER ELECTRONICS

INDEX

SAFETY INSTRUCTIONS........................................................................................................... 6

1. INTRODUCTION .................................................................................................................. 10

2. STRING SUPERVISOR DESCRIPTION .............................................................................. 11

3. TECHNICAL CHARACTERISTICS...................................................................................... 12

4. DIMENSIONS....................................................................................................................... 13

5. INSTALATION AND CONNECTION.................................................................................... 14

5.1. String Supervisor Wiring –Freesun LVT Series......................................................... 14

5.2. String Supervisor Wiring –Freesun HE and HES Series........................................... 15

6. CONFIGURATION, SETTING AND COMMISSIONING....................................................... 17

POWER ELECTRONICS

FREESUN ACCESSORIES –String Supervisor

SAFETY INSTRUCTIONS

IMPORTANT!

Read this manual carefully to maximise the performance of this product and to ensure its safe

use.

Power Electronics accepts no responsibility or liability for any and all damage resulting from

inappropriate use of the equipment.

The information contained in the installation guide must be observed when installing the String

Supervisor

In this manual, safety messages are classified as follows:

WARNING

Do not remove the cover while the power is applied or the unit is in operation.

Otherwise electric shock could occur.

Do not run the device with the front cover removed.

Otherwise you may get an electric shock due to the high voltage terminals.

Do not remove the cover except for periodic inspections or wiring, even if the input power is not

applied. Otherwise you may access the charged circuits and get an electric shock.

Operate the switches with dry hands.

Otherwise you may get an electric shock.

Do not use cables with damaged insulation.

Otherwise you may get an electric shock.

Do not subject the cables to abrasions, excessive stress, heavy loads or pinching.

Otherwise, you may get an electric shock.

FREESUN SERIES –String Supervisor

POWER ELECTRONICS

SAFETY INSTRUCTIONS

CAUTION

Install the device on a non-flammable surface. Do not place flammable material nearby.

Otherwise fire could occur.

Disconnect the input power if the device gets damaged.

Otherwise it could result in a secondary accident or fire.

Do not apply power to a damaged device or to a device with parts missing even if the installation

is complete.

Otherwise you may get an electric shock.

Do not allow lint, paper, wood chips, dust, metallic chips or other foreign matter into the device.

Otherwise fire or accident could occur.

WARNINGS

RECEPTION

The STRING SUPERVISOR is carefully tested and perfectly packed before leaving the factory.

In the even of transport damage, please ensure that you notify the transport agency and POWER

ELECTRONICS: 902 40 20 70 (International +34 96 136 65 57) or your nearest agent, within

24hrs from receipt of the goods.

UNPACKING

Make sure model and serial number of the String Supervisor are the same on the box, delivery

note and unit.

RECYCLING

Packing of the equipments should be recycled. For this, it is necessary to separate different

materials included (plastic, paper, cardboard, wood, ...) and deposit them on proper banks.

Waste products of electric and electronic devices should be selectively collected for their correct

environmental management.

POWER ELECTRONICS

FREESUN ACCESSORIES –String Supervisor

SAFETY INSTRUCTIONS

CAUTION

SAFETY

Before operating the device, read this manual thoroughly to gain and understanding of the unit.

If any doubt exists then please contact POWER ELECTRONICS, (902 40 20 70 / +34 96 136 65

57) or your nearest agent.

Wear safety glasses when connecting the String Supervisor to the solar inverter and when

operating the inverter with power applied and the front cover opened.

Install the device according to the instructions within this manual.

Do not place heavy objects on the device.

Ensure that the mounting orientation is correct.

Do not drop the String Supervisor or subject it to impact.

The String Supervisor devices contain static sensitive printed circuits boards. Use static safety

procedures when handling these boards.

Avoid installing the device in conditions that differ from those described in the Technical

Characteristics section.

TRIAL RUN

Verify all parameters before operating the device.

Always apply voltage and current signals to each terminal that are within levels indicated within

this manual. Otherwise, damage to the device may result.

OPERATION PRECAUTIONS

Do not modify or alter anything within the device.

FREESUN SERIES –String Supervisor

POWER ELECTRONICS

SAFETY INSTRUCTIONS

CAUTION

SPECIAL HAZARDS OF PHOTOVOLTAIC SYSTEMS

Photovoltaic systems have special characteristics that can represent special hazards:

An active power source is connected. This means that, regardless to the operating mode of the

inverter, there may be voltage present, either from the photovoltaic generator and/or the

FREESUN. This is especially important to consider when disconnecting particular parts of the

system (the String Supervisor must be connected to the DC input in the inverter).

Very high DC voltages are present (no zero-crossing) which, in case of a fault or inappropriate

use of fuses or plugs, may lead to arcing.

The short-circuit current of the photovoltaic generator is only slightly higher than the maximum

operating current and is also dependent on the level of a solar irradiation.

A highly branched generator array may be difficult to disconnect if a fault develops (e. g. short

circuit). We recommend the extra use of external DC circuit breakers for disconnecting the

inverter and/or the DC main cables / String supervisors (DC circuit breakers are built-in). One

circuit breaker should be allocated to each input, and these should be located near to de

FREESUN as described in the standard VDE0100 part 7-712 and the VDI 6012 regulations.

The inverter contains capacitors on the AC and DC sides. The discharge time of the capacitors is

longer than 10 minutes. For this reason, it is required to wait longer than this time before making

any operation or maintenance actions related to the connection between the String Supervisor

and the inverter.

Este manual sirve para los siguientes modelos

Tabla de contenidos

Otros manuales de Inversor de Power Electronics

Power Electronics

Power Electronics SD700 Series Instrucciones de montaje

Power Electronics

Power Electronics SD 300 Series Manual de lista de piezas

Power Electronics

Power Electronics SD 500 Series Manual de lista de piezas

Power Electronics

Power Electronics SD750 Series Manual de usuario

Power Electronics

Power Electronics SD700FL Series Manual de usuario

Power Electronics

Power Electronics SD 500 Series Manual de lista de piezas

Power Electronics

Power Electronics SD 500 Series Instrucciones de montaje

Power Electronics

Power Electronics SD750 Series Manual de usuario

Power Electronics

Power Electronics SD 500 Series Manual de usuario

Power Electronics

Power Electronics SD700 Series Manual de lista de piezas

Power Electronics

Power Electronics SD700 Series Instrucciones de montaje

Power Electronics

Power Electronics SD 500 Series Manual de usuario

Power Electronics

Power Electronics SD700 Series Manual de usuario

Manuales populares de Inversor de otras marcas

Fourgroup

Fourgroup Easy Manual de usuario

Velleman

Velleman PI300M Manual de usuario

Sungrow

Sungrow SG350HX-US Manual de usuario

WilTec

WilTec 61897 Manual de usuario

SMA

SMA SUNNY BOY STORAGE 2.5 Manual de usuario

Simplicity

Simplicity LANDLORD 316 Manual de usuario

Santak

Santak SMAX 3000 Manual de usuario

ATON

ATON RA.Store-3 Manual de usuario

ZIEHL-ABEGG

ZIEHL-ABEGG FXET4AMQ Manual de usuario

Tektronix

Tektronix CFG250 Manual de usuario

Champion

Champion 200989 Manual de usuario

Vanner

Vanner 20-500 Series Manual de usuario

GE GEP Manual de usuario

Astrel Group

Astrel Group Power Reducer Guía rápida

MULTIQUIP

MULTIQUIP GDP-5H Guía

GoWISE

GoWISE PS1007 Manual de usuario

Promate

Promate PM13500D ES Manual de usuario

Mastervolt

Mastervolt WHISPER 3.5M3000 RPM Manual de usuario