Portwell WEBS-5491 Manual de usuario
WEBS-5491
Fan-less Embedded System
User's Manual
Version 1.0
Copyright © Portwell, Inc., 2015. All rights reserved.
All other brand na es are registered trade arks of their respective owners.
Preface
Table of Contents
How to Use This Manual
Chapter 1 System Overview.......................................................................................................1-1
1.1 Introduction ....................................................................................................... 1-1
1.2 Check List ........................................................................................................... 1-1
1.3 Product Specification ........................................................................................ 1-3
1.4 Mechanical Di ension ..................................................................................... 1-4
Chapter 2 System Installation....................................................................................................2-1
2.1 E bedded Board H/W Ju per Setting Introduction ................................. 2-1
2.2 Selectable I/O Kit Installation ......................................................................... 2-5
2.3 Me ory Installation ......................................................................................... 2-6
2.4 HDD Installation ............................................................................................... 2-7
2.5 CF and SD card Installation ............................................................................. 2-7
2.6 Getting Started ................................................................................................... 2-8
2.7 I/O Interfaces .................................................................................................... 2-8
2.7.1 Front View ................................................................................................. 2-8
2.7.2 Rear View .................................................................................................. 2-9
Chapter 3 BIOS Setup Information............................................................................................3-1
3.1 Entering Setup—Launch Syste Setup ......................................................... 3-1
3.2 Main .................................................................................................................... 3-2
3.3 Configuration .................................................................................................... 3-3
3.4 Security ............................................................................................................. 3-20
3.5 Boot ................................................................................................................... 3-21
3.6 Save and Exit ................................................................................................... 3-23
Chapter 4 Important Instructions ..............................................................................................4-1
4.1 Note on the Warranty ....................................................................................... 4-1
4.2 Exclusion of Accident Liability Obligation ................................................... 4-1
4.3 Liability Li itations / Exe ption fro the Warranty Obligation............ 4-1
4.4 Declaration of Confor ity ............................................................................... 4-1
Chapter 5 Frequent Asked Questions.......................................................................................5-1
Preface
How to Use This Manual
The anual describes how to configure your WEBS-5491 e bedded syste to eet
various operating require ents. It is divided into five chapters, with each chapter
addressing a basic concept and operation of Fan-less E bedded Syste .
Chapter 1: System Overview. Present what ay have in the box and give an
overview of the product specifications and basic syste architecture for this fan-less
e bedded syste .
Chapter 2: System Installation. Show the definitions and locations of all the
interfaces and describe a proper installation guide so that can easily configure the
syste .
Chapter 3: BIOS Setup Information. Specify the eaning of each setup para eters,
how to get advanced BIOS perfor ance and update new BIOS. In addition, POST
checkpoint list will give users so e guidelines of trouble-shooting.
Chapter 4: Important Instructions. Indicate so e instructions which ust be
carefully followed when the fan-less e bedded syste is used.
Chapter 5: Frequent Asked Questions. Provide the answers for the ost frequently
asked questions.
The content of this anual is subject to change without prior notice. These changes
will be incorporated in new editions of the docu ent. The vendor ay ake
supple ent or change in the products described in this docu ent at any ti e.
Revision History
Revision
Date Details of Change(s)
V1.0 2015/11/11
Initial Release
System Overview
WEBS-5491 Embedded System User’s Manual 1-1
Chapter 1
System Overview
1.1 Introduction
Portwell Inc., a world-leading innovator in the Industrial PC (IPC) arket and a
Pre ier Me ber of the Intel® Internet of Things (IoT) Solutions Alliance, announced
WEBS-5491, a fan-less e bedded syste . Builds on Intel® Baytrail SoC and takes
advantages of Intel® Ato ™ E3845(10 W Max TDP, 2M Cache, 1.91 GHz) processor
technologies, especially its co pact design plus low power consu ption.
The 4th generation Intel Ato Bay Trail-I series provides extended te perature
fro -40 to 110 degrees, high I/O connectivity, integrated e ory controller, error
correcting code (ECC), virtualization, and built-in security capabilities within 10W
ther al design power (TDP). A ong the , E3845 SoC processor is designed for
applications including highly efficient and dedicated i age signal processing with
secure content delivery.
Portwell’s WEBS-5491 is designed to be power-opti ized and value-opti ized.
Instead of adopting a obile CPU like a traditional e bedded syste , WEBS-5491
utilizes the newest Intel® Ato ™ platfor Intel® Ato ™ E3845, and Intel® Baytrail
SoC chipset, which is ore econo ical co pared to its obile counterpart and
provides great efficacy as well as ultra low power consu ption; this akes
WEBS-5491 not only co petitive but outstanding in the arket. This feature allows
WEBS-5491 e bedded syste to be used extensively in harsh environ ents such as
the operating te perature fro -30 to 70 ℃ degrees. The syste includes all required
interfaces for industrial application: 1 x DVI-I port, 2 x Gigabit Ethernet port, 3 x USB
1.1/2.0, 1 x USB 3.0, 2 x RS-232/422/485 port, 1 x 2.5" SATA HDD, 1x CF and 1 x SD
socket for storage capacity. Two SMA Antenna holes provide optional wireless
solution via half size Mini-PCIe odule.
To fulfill different application needs and to secure the syste fro power input
change, the syste accepts DC 12~24V wide range power input with 3-pin ter inal
block connector for various operating environ ent. The WEBS-5491 e bedded
syste offers wall ounting DIN Rail ounting. It supports any ainstrea
operating syste s, such as Windows 8.1, Windows 7 and Linux.
1.2 Check List
The WEBS-5491 E bedded syste package covers the following ite s:
Essential
One WEBS-5491 Fan-less E bedded syste
System Overview
WEBS-5491 Embedded System User’s Manual 1-2
Screws for HDD installation
M3X4L Screw 4 pieces
Driver CD
3-pin Ter inal Block Connector (Fe ale)
Wall ount kit (W/ 6*screws)
Optional
60W Power Adapter with Power Cord (EU/US type) and Switch Cable
60W Power Adapter
Power Cord (US type)
Power Cord (EU type)
Power Switch Cab e (from DC Jack to 3-pin TBC)
Selectable I/O Kit
2x RS-232/422/485, 1x RS-232
(Expansion: Option 1)
1x RS-232/422/485, 2x USB ports and 1x Line-out
(Expansion: Option 2)
DVI to VGA cable
DIN Rail kit (W/ 7*screws)
System Overview
WEBS-5491 Embedded System User’s Manual 1-3
If any of these ite s is da aged or issing, please contact your vendor and keep all
packing aterials for future replace ent and aintenance.
1.3 Product Specification
System
SOC Intel® Atom™ Qual-Core E3845 (1.91 G z)
Memory DDR3L SO-DIMM 1333/1600 M z max up to 8 GB
BIOS AMI
Graphics Intel® Gen7 Graphics
LVDS Single/Dual Channel 24-bit
LAN Chipset Dual Intel® I210IT Gigabit Ethernet (Support Jumbo Frame)
Audio Realtek igh Definition Audio Codec
Watchdog Timer 1~255 levels reset
Storage Device 2.5" SATA DD / SSD, Compact Flash II up to 64 GB, SD card
OS Windows 7 / Windows 8.1 / Linux™
I/O Interface
Series Port 2 x RS-232/422/485 (Expansion : default)
Display 1 x DVI-I
USB 1 x USB 2.0, 1 x USB 3.0, 2 x USB 2.0 (Expansion: default)
Ethernet 2 x Gigabit Ethernet
Others 2 x SMA Antenna hole for WiFi/3G Solution
Expansion 2 x RS-232/422/485, 1 x RS-232 (Expansion: option 1)
1 x Line-out, 1 x RS-232/422/485, 2 x USB 2.0 (Expansion: option 2)
Mechanical
Mounting (mm) VESA Mount 75 x 75 & 100 x 100 ; Panel Mount
Weight (Kg) 2.8kg
Dimension 279(W) x 164(D) x 34( ) mm
Power
Power Supply DC 12 ~ 24V input with 3-pin Terminal Block Connector
Power Adaptor 12V, 5A/60W(Optional)
Environment
OP /Storage Temp -30℃~70 ℃ / -40℃~80℃(20~90% non-condensing)
Vibration 1.0G (CF/SSD/SD) and 0.5G ( DD) , Power on & 2.16G, Packaged; 5~500 z
Shock 15G peak acceleration, 11 ms (Power on condition)
Drop Package with Carton from 96.5 cm (1-Corner, 3-Axis, 6-Face)
Certification CE/FCC Class A
System Overview
WEBS-5491 Embedded System User’s Manual 1-4
1.4 Mechanical Dimension
Front view of the WEBS-5491 syste
Rear view of the WEBS-5491 syste
Side view of the WEBS-5491 syste
System Overview
WEBS-5491 Embedded System User’s Manual 1-5
Top view of the WEBS-5491 syste
Botto view of the WEBS-5491 syste
System Installation
WEBS-5491 Embedded System User’s Manual 2-1
Chapter 2
System Installation
This chapter provides you with instructions to set up your WEBS-5491 e bedded
syste . Definitions and locations of all the interfaces are described so that you can
easily configure your syste .
2.1 Embedded Board H/W Jumper Setting Introduction
WEBS-5491 E bedded syste adopts PEB-99A4 other board. You ay configure
the e bedded syste by setting ju pers of the other board to atch the needs of
your applications. To select any option, cover the ju per cap (SHORT) or re ove
(NC) it fro the ju per pins according to the following instructions.
*Note: NC stands for “Not Connect”.
Component side:
System Installation
WEBS-5491 Embedded System User’s Manual 2-2
Solder side:
Connector and Jumper setting:
Connector
J3 DDR3 SO-DIMM Socket.
J4 Compact F ash connector.
J5 PCI-E X 1 S ot.
J6 Mini-PCI-E S ot.(Ha f size)
J7 SATA Connector with power.
J8 GPIO Connector.(2*5 Pin/2.0mm)
J9 SM- Bus Connector.
J10 Battery Connector.
J11 PCI-E X4 S ot(Right ang e) for Audio and COM Port Signa .
J12 USB Port 0~1 D-Sub Connector. (Up:USB2.0 Down:USB3.0)
J13 RJ45 Connector.
J14 RJ45 Connector.
J15 DVI-I D-sub Connector.
J16 Power Input Connector. (Termina B ocks 3Px1/5.08mm fema e)
J19 SD Card.
J22 USB Port 3 Connector (1*4 Pin Wafer/2mm).
Jumpers
JP1 C ear CMOS.
JP7 GPIO Vo tage se ection.
JP8 Audio out.(From amp ifier)
JP9 LPC Debug Port.
JP10 COM PORT RI and power source adjust pin.
Tabla de contenidos
Manuales populares de Sistema de E/S de otras marcas
WAGO
WAGO 750-344 Manual de usuario
Teknim
Teknim TWM-1887 Manual de instrucciones
Intelligent Appliance
Intelligent Appliance IA-2662-E Manual de usuario
BERGHOF
BERGHOF ECC DIO 16/16 Manual de instrucciones
Advantech
Advantech PCM-27J3AU Manual de instalación y operación
Festo
Festo CP-E08-M12-CL Manual de usuario
