Portable Winch PCA-1264 Manual de usuario
PCA-1264
WINCH SUPPORT FOR VERTICAL PULLING
USER MANUAL
© 2019 Portable Winch Co. –All rights reserved –Printed in Canada
44-0246
PCA-1264
WINCH SUPPORT FOR VERTICAL PULLING
2
Document name: PCA-1264 - User Manual
Revision : 04 –2019/08/30
User Manual
READ CAREFULLY
Portable Winch Co. thanks you for your
confidence and congratulates you on the
purchase of the Winch support for vertical
pulling PCA-1264.
The Winch support for vertical pulling is
composed of three main elements:
A : Frame
B : Adjustable shelf
C : Redirect pulley
If any of the items are missing, please contact
your authorized dealer.
IN ORDER TO USE THIS PRODUCT SAFELY, IT IS IMPORTANT THAT ALL USERS READ THIS MANUAL CAREFULLY.
NEVER ATTEMPT TO LIFT MORE THAN THE RATED LIFTING CAPACITY OF THE WINCH IN SINGLE LINE. REFER TO
THE USER'S MANUAL FOR THE WINCH MODEL USED.
PERFORM A TEST PULL WITH A LIGHT LOAD IN ORDER TO ASSES THE STABILITY OF THE EQUIPMENT.
AFTER PULLING FOR A FEW SECONDS, RELEASE THE TENSION AND CHECK THE SOLIDITY OF THE INSTALLATION.
The Winch support for vertical pulling The Winch support for vertical pulling can be anchored to different accessories depending on the
available anchor point and the work to be done. All are sold separately.
Refer to the anchors chart on the following page to find your situation and to know the installation and operating instructions.
PCA-1264
WINCH SUPPORT FOR VERTICAL PULLING
3
Document name: PCA-1264 - User Manual
Revision : 04 –2019/08/30
User Manual
READ CAREFULLY
ANCHORS CHART
TYPE OF
ANCHOR POINT
ANCHORING ACCESSORY TO BE USED
TO ATTACH PCA-1264 SUPPORT
WINCH POSITION AND
DESIRED ROPE DIRECTION
REFERENCE
Cylindrical shape
(tree, pole, etc.)
PCA-1263
Winch anchor system for trees and poles.
The winch faces the anchoring.
The rope comes from the top towards the winch (vertical).
Installation no. 1
(page 5)
The winch faces the load.
The rope is directly in line with the winch (horizontal).
Installation no. 2
(page 6)
Pylon
(with ‘V’ shped
legs at 90o)
PCA-1806
Pylon mount winch anchor.
The winch faces the anchoring.
The rope comes from the top towards the winch (vertical).
Installation no. 3
(page 7)
The winch faces the load.
The rope is directly in line with the winch (horizontal).
Installation no. 4
(page 8)
PCA-1264
WINCH SUPPORT FOR VERTICAL PULLING
4
Document name: PCA-1264 - User Manual
Revision : 04 –2019/08/30
User Manual
READ CAREFULLY
TYPE OF
ANCHOR POINT
ANCHORING ACCESSORY TO BE USED
TO ATTACH PCA-1264 SUPPORT
WINCH POSITION AND
DESIRED ROPE DIRECTION
REFERENCE
Vehicle
PCA-1267 ou PCA-1501
Square tube for trailer hitch.
The winch faces the anchoring.
The rope comes from the top towards the winch (vertical).
Installation no. 5
(page 9)
The winch faces the load.
The rope is directly in line with the winch (horizontal).
Installation no. 6
(page 10)
PCA-1266
Heck-Pack anchoring system with adaptor
for 50 mm towing balls.
The winch faces the anchoring.
The rope comes from the top towards the winch (vertical).
Installation no. 7
(page 11)
The winch faces the load.
The rope is directly in line with the winch (horizontal).
Installation no. 8
(page 12)
PCA-1264
WINCH SUPPORT FOR VERTICAL PULLING
5
Document name: PCA-1264 - User Manual
Revision : 04 –2019/08/30
User Manual
READ CAREFULLY
Installation no. 1 - The winch faces the anchoring. The rope comes from the top towards the winch (vertical).
Accessories used
A
PCA-1263
Winch anchor system for trees and poles
B
PCA-1264
Winch support for vertical pulling
DO NOT GO OVER THE ROPE ENTRY PULLEY OF THE WINCH WITH THE ROPE AS IT WILL CREATE FRICTION AND WILL
REDUCE LIFTING CAPACITY. GO UNDER THE ROPE ENTRY PULLEY OF THE WINCH. IN THIS CASE, THE ROPE ENTRY PULLEY OF THE WINCH WILL
NOT BE USED.
A
B
PCA-1264
WINCH SUPPORT FOR VERTICAL PULLING
6
Document name: PCA-1264 - User Manual
Revision : 04 –2019/08/30
User Manual
READ CAREFULLY
Installation no. 2 - The winch faces the load. The rope is directly in line with the winch (horizontal).
Accessories used
A
PCA-1263
Winch anchor system for trees and poles
B
PCA-1332
Pivoting anchor for vertical pull support
C
PCA-1264
Winch support for vertical pulling
WHEN USED IN DIRECT LINE, THE PIVOTING ANCHOR FOR VERTICAL PULL SUPPORT (PCA-1332) MUST BE FIXED TO THE
WINCH SUPPORT FOR VERTICAL PULL (PCA-1264). THIS ANCHOR (SOLD SEPARATELY) WILL ALLOW THE WINCH TO ALIGN WITH THE LOAD.
PUT THE ROPE ON THE WINCH ENTRY PULLEY.
A
B
C
IN THIS SITUATION,
DO NOT USE THE
REDIRECT PULLEY
Supplied with the
Winch support for
vertical pulling.
PCA-1264
WINCH SUPPORT FOR VERTICAL PULLING
7
Document name: PCA-1264 - User Manual
Revision : 04 –2019/08/30
User Manual
READ CAREFULLY
Installation no. 3 - The winch faces the anchoring. The rope comes from the top towards the winch (vertical).
Accessories used
A
PCA-1806
Pylon mount winch anchor
B
PCA-1264
Winch support for vertical pulling
DO NOT GO OVER THE ROPE ENTRY PULLEY OF THE WINCH WITH THE ROPE AS IT WILL CREATE FRICTION AND WILL
REDUCE LIFTING CAPACITY. GO UNDER THE ROPE ENTRY PULLEY OF THE WINCH. IN THIS CASE, THE ROPE ENTRY PULLEY OF THE WINCH WILL
NOT BE USED.
A
B
PCA-1264
WINCH SUPPORT FOR VERTICAL PULLING
8
Document name: PCA-1264 - User Manual
Revision : 04 –2019/08/30
User Manual
READ CAREFULLY
Installation no. 4 - The winch faces the load. The rope is directly in line with the winch (horizontal).
Accessories used
A
PCA-1806
Pylon mount winch anchor
B
PCA-1332
Pivoting anchor for vertical pull support
C
PCA-1264
Winch support for vertical pulling
WHEN USED IN DIRECT LINE, THE PIVOTING ANCHOR FOR VERTICAL PULL SUPPORT (PCA-1332) MUST BE FIXED TO THE
WINCH SUPPORT FOR VERTICAL PULL (PCA-1264). THIS ANCHOR (SOLD SEPARATELY) WILL ALLOW THE WINCH TO ALIGN WITH THE LOAD.
PUT THE ROPE ON THE WINCH ENTRY PULLEY.
A
C
IN THIS SITUATION,
DO NOT USE THE
REDIRECT PULLEY
Supplied with the
Winch support for
vertical pulling.
B
PCA-1264
WINCH SUPPORT FOR VERTICAL PULLING
9
Document name: PCA-1264 - User Manual
Revision : 04 –2019/08/30
User Manual
READ CAREFULLY
Installation no. 5 - The winch faces the anchoring. The rope comes from the top towards the winch (vertical).
Accessories used
A
PCA-1267/1501
Square tube for trailer hitch (vehicle)
B
PCA-1264
Winch support for vertical pulling
DO NOT GO OVER THE ROPE ENTRY PULLEY OF THE WINCH WITH THE ROPE AS IT WILL CREATE FRICTION AND WILL
REDUCE LIFTING CAPACITY. GO UNDER THE ROPE ENTRY PULLEY OF THE WINCH. IN THIS CASE, THE ROPE ENTRY PULLEY OF THE WINCH WILL
NOT BE USED.
A
B
PCA-1264
WINCH SUPPORT FOR VERTICAL PULLING
10
Document name: PCA-1264 - User Manual
Revision : 04 –2019/08/30
User Manual
READ CAREFULLY
Installation no. 6 - The winch faces the load. The rope is directly in line with the winch (horizontal).
Accessories used
A
PCA-1267/1501
Square tube for trailer hitch (vehicle)
B
PCA-1332
Pivoting anchor for vertical pull support
C
PCA-1264
Winch support for vertical pulling
WHEN USED IN DIRECT LINE, THE PIVOTING ANCHOR FOR VERTICAL PULL SUPPORT (PCA-1332) MUST BE FIXED TO THE
WINCH SUPPORT FOR VERTICAL PULL (PCA-1264). THIS ANCHOR (SOLD SEPARATELY) WILL ALLOW THE WINCH TO ALIGN WITH THE LOAD.
PUT THE ROPE ON THE WINCH ENTRY PULLEY.
A
C
IN THIS SITUATION,
DO NOT USE THE
REDIRECT PULLEY
Supplied with the
Winch support for
vertical pulling.
B
Este manual sirve para los siguientes modelos
1
Tabla de contenidos
Idiomas:
Otros manuales de Cabrestante de Portable Winch
Portable Winch
Portable Winch 600MH-Li Manual de usuario
Portable Winch
Portable Winch Greenworks Commercial 82W1 PCW3000-Li Manual de usuario
Portable Winch
Portable Winch PCW3000 Manual de usuario
Portable Winch
Portable Winch PCW3000 Manual de usuario
Portable Winch
Portable Winch PORTABLE CAPSTAN WINCH PCW5000 Manual de usuario
Portable Winch
Portable Winch PORTABLE CAPSTAN WINCH PCW5000 Manual de usuario
Portable Winch
Portable Winch PCW3000 Instrucciones de montaje
Portable Winch
Portable Winch PCW3000 Manual de usuario
Portable Winch
Portable Winch PORTABLE CAPSTAN WINCH PCW5000 Manual de usuario
Portable Winch
Portable Winch PCW3000-LI Manual de usuario
