Polygroup TG70M3AHPP00 Manual de usuario
ASSEMBLY INSTRUCTIONS MADE IN CHINA
Top view Side view
Fig. C
TREE ASSEMBLY INSTRUCTIONS
9. After shaping the entire tree following the previous step, slightly upsweep all branch tips for a uniform
look. Shift branches to fill any gaps.Your Christmas tree is now complete and ready to be decorated.
MODEL #: TG70M3AHPP00
*Electrical Rating For The Tree
(For Indoor Use Only)
Input:120VAC, 60Hz, 0.25A
Output: 29V 0.45A
Fig. B - Tree and Light Assembly
Section 3
Section 1
Section 2
Adaptor
To Be Plugged
Into Wall
Outlet
Insert Green
Label Extension
Cord into Adaptor
Insert Yellow Label
Plugs Into Yellow
Labeled Extension Cord
1
3. Each tree section is numbered with a tag. Please identify all sections before assembling.
4. Assemble the tree from the bottom to the top. Start with the bottom section and insert it into the
assembled stand.Make sure the pole is firmly inserted and secured into the stand.
5. Continue by inserting the upper tree section(s) to the lower section(s) until inserting the tree top.
6. Allow branches to fall into place or gently pull up and out.When adjusting branches, be sure that all
wires are free of branch hinges.
7. Just plug the adaptor (connecting with the tree power cord) into the wall outlet (See Fig. B), your
entire tree should now be lit.If some bulbs do not light or flickers, search for any loose plugs and/or
broken, loose or missing bulbs. Replace bulbs promptly in order to maintain the performance and life
expectancy of your pre-lit tree.
8. Begin to shape the branches and tips working from the bottomto the top. Start with tips farthest from
the pole and fan out one to the right,one to the left and one at the center of the main stem. (See Fig. C)
1. Before you start to assemble your tree, choose an appropriate location near a wall outlet.
2. Assemble the tree stand and place on a level surface. (See Fig. A)
Congratulations on purchasing your new tree from Polygroup®! Carefully follow the instructions
below on how to quickly and easily set up your new tree.
Fig. A - Tree Stand Assembly
Unfold the legs and lay the
stand in a flat area.Then slide
the locking disc downward and
snap into place.
Color show
controller
Foot Pedal
on/off Switch
ASSEMBLY INSTRUCTIONS MADE IN CHINA
STORAGE INSTRUCTIONS
TROUBLE SHOOTING TIPS
SPARE PARTS
1. Unplug adaptor from the wall outlet first and then remove all ornaments and decorations.
2. Disassemble the tree from the top to the bottom. Start with the tree top and gently lift straight up to
remove from section below and fold all branches toward the pole.
3. Continue by gently lifting straight up each section(s) from the section
below and fold all branches toward the pole until the bottom section
is removed from the tree stand. Cover the cap on the poles to avoid
damaging the internal parts. (See Fig. D)
4. Carefully place all tree sections into shipping box and tape it shut.
5.When not in use, please store your tree in a cool, dry place away from
sunlight. Exposing your tree to excessive heat or humidity may damage your tree.
For Pre-lit Trees, If The Tree Does Not Illuminate
1. Please check to make sure that all plugs are properly connected and adaptor is plugged into the wall
outlet. (If the tree comes with a foot pedal, try stepping on the on/off button).
2.Turning the poles gently to make sure pole to pole are connected into place.
3. Check for loose connection between light string plugs and extension cords.
4. Please check for loose, broken or missing light bulbs and replace as needed.
1. Extra hinge pins are included for repairing the hinges.Place the branch into the slot of the bracket.
2. Insert a new hinge pin through the hole and secure using the retainer washer.(See Fig. E)
Each tree includes hinge pins/washers, and for
pre-lit trees spare bulbs are also included. If extra
parts are needed, please contact our customer
servicecenter.
Loose Hinge Pin
Fig.E
Fig. D
WARNING
1. Use only power adaptor supplied with this product, using a different
adaptor will damage the lights. and cause fire, electrical shock hazards.
2. FOR INDOOR USE ONLY.
3.The external flexible cable or cord of this luminaire cannot be replaced; If the cord is damaged,
the luminaire shall be destroyed.
2
IMPORTANT SAFETY INSTRUCTIONS
When using electrical products, basic precautions should always be followed including the following:
a. READ AND FOLLOW ALL SAFETY INSTRUCTIONS.
b. Do not use seasonal products outdoors unless marked suitable for indoor and outdoor use.When
products are used in outdoor applications, connect the product to a Ground Fault Circuit Interrupting
(GFCI) outlet. If one is not provided, contact a qualified electrician for proper installation.
c.This seasonal use product is not intended for permanent installation or use.
d. Do not mount or place near gas or electric heaters, fireplaces, candles or other similar sources of heat.
e. Do not secure the wiring of the product with staples or nails, or place on sharp hooks or nails.
f. Do not let lamps rest on the supply cord or on any wire.
g. Unplug the product when leaving the house, when retiring for the night, or if left unattended.
h.This is not a toy. For decorative use only! To avoid risk of fire, burns, personal injury and electric shock it
should not be played with or placed where small children can reach it.
i. Do not use this product for other than its intended use.
j. Do not hang ornaments or other objects from cord, wire, or light string.
k. Do not close doors or windows on the product or extension cords as this may damage wire insulation.
l. Do not cover the product with cloth, paper or any material not part of the product when in use.
m.This product is equipped with push-in type lamps. Do not twist lamps.
n. Read and follow all instructions that are on the product or provided with the product.
o. SAVE THESE INSTRUCTIONS
ASSEMBLY INSTRUCTIONS MADE IN CHINA
3
CAUTION:
1. Risk of fire. Use only the power adapter provided with this product. Do not replace lamps with other than
the spare lamps provided with this product.
2. To reduce the risk of fire and electric shock:a) Do not install on trees having needles, leaves or branch
covering of metal or materials which look like metal, and b)Do not mount or support strings in a manner
that can cut or damage wire insulation.
3. To reduce the risk of fire and electric shock, use only the power supply that was provided with this product.
Step 1
Grasp the power adapter or power cord plug, and than unplug from the power outlet. Do not pull
the power cord.
LAMP REPLACEMENT
Step 2
Lift up lamp lock tab, then
pull the lamp and plastic lamp base
straight out of the lamp-holder.
Step 3
Replace with a new spare
lamp provided with this product.
( Reference figure only)
USER SERVICING INSTRUCTIONS
CUSTOMER SERVICE FOR CHRISTMAS TREES
For any questions, assistance, or missing parts, Do Not Return To Place Of Purchase. Please contact
us at 1-888-919-0070 or visit our website at www.polygroup.com. One of our customer service
representatives will be happy to assist you.
TREE ID# IS LOCATED ON END PANEL OF BOX.TREE ID# IS REQUIRED WHEN REQUESTING REPLACEMENT PARTS.
Customer Name:
Address:(No P.O. Boxes)
City & State:
Zip Code:
Day Phone:
Date Purchased:
Tree ID#:
Tree UPC#:
Store Purchased:
Specify Problem:
Otros manuales de Pino artificial de Polygroup
Polygroup
Polygroup 212T-206/48-100CL Manual de usuario
Polygroup
Polygroup TGC0M3P07C00 Manual de usuario
Polygroup
Polygroup TG76M5224C00 Manual de usuario
Polygroup
Polygroup TG76M4244L09 Manual de usuario
Polygroup
Polygroup C21 Manual de usuario
Polygroup
Polygroup TG76M4836C02 Manual de usuario
Polygroup
Polygroup TG90M6010C13 Manual de usuario
Polygroup
Polygroup TG76M3P51C00 Manual de usuario
Polygroup
Polygroup TG66M2789D00 Manual de usuario
Polygroup
Polygroup TG76M3AE4C01 Manual de usuario
Polygroup
Polygroup TG70M3V05C00 Manual de usuario
Polygroup
Polygroup TG76M6010C09 Manual de usuario
Polygroup
Polygroup TG76M4244L12 Manual de usuario
Polygroup
Polygroup TG76M6010X00 Manual de usuario
Polygroup
Polygroup TG90P6059D02 Manual de usuario
Polygroup
Polygroup Home Heritage TG90M3W92D00 Manual de usuario
Polygroup
Polygroup TG90M2T20D01 Manual de usuario
Polygroup
Polygroup TGC0P3499C00 Manual de usuario
Polygroup
Polygroup Caribbean Tree Manual de usuario
Polygroup
Polygroup TG40P4174L00 Manual de usuario
Manuales populares de Pino artificial de otras marcas
Trim a Home
Trim a Home TY-S6-250L Manual de usuario
Sears
Sears Donner & Blitzen M44814 Manual de usuario
BETHLEHEM LIGHTING
BETHLEHEM LIGHTING 6.5’ Tinsel Tree Manual de usuario
Home Accents Holiday
Home Accents Holiday TG76P3D93L08 Manual de usuario
Costway
Costway CM23595US Manual de usuario
Home Accents Holiday
Home Accents Holiday TG76P4C15D03 Manual de usuario
Home Accents Holiday
Home Accents Holiday 1001540584 Manual de usuario
Home Accents Holiday
Home Accents Holiday TG90P3F28D00 Manual de usuario
Williams-Sonoma
Williams-Sonoma TG46P4368L01 Manual de usuario
Trim a Home
Trim a Home 7.5 ft. Berkshire Fir Tree Manual de usuario
Home Accents Holiday
Home Accents Holiday 1004363936 Manual de usuario
Polytree
Polytree TG66EH148C17 Manual de usuario