Poly Savi 7410 Office Manual de usuario
Savi 7410/7420 Office
DECT Wireless Headset System
User Guide
Contents
DECT Information 3
DECT Enhanced Security 3
Overview 4
Your headset system 4
Headset overview 4
Base overview 5
Accessories 6
Connect your headset system 7
Desk phone setup details 7
Position Your Base 9
Fit and charge 10
Wear on the right or left 10
Charge your headset 10
Headset battery status 10
Talk Time 10
Replace rechargeable battery 11
Load software 12
Update your Poly device 12
Pair to your mobile phone 13
Auto connect feature 13
Transfer mobile audio 13
Disconnect your mobile phone 13
The basics 14
Headset overview 14
Power on your headset 14
Adjust volume 14
Launch Microsoft Teams (Teams model only) 15
Change your default line 15
Get a dial tone 15
Stream audio 15
Make, answer, end calls 16
Make a call 16
End/take a call 16
Mute 16
Answer a second call 16
Reject a Mobile Call 16
Merge a call from 2 sources 16
Set up a conference call 17
More Features 18
Change voice prompt language 18
Optimize audio quality 18
Limit office noise 18
Remove or connect a headset charge cradle 18
Set the range 18
Automatic secure subscription 19
Troubleshooting 20
Headset 20
Desk Phone 21
Mobile 21
Softphone 22
Safety warnings 24
Safety Instructions 24
Support 26
DECT Information
DECT products should never be used outside the region in which they were originally
purchased and intended to be used.
The enclosed DECT 6.0 wireless product uses restricted wireless radio frequencies which
vary by country. DECT 6.0 devices are generally authorized for use in the US/Canada/
Mexico. Use of this DECT 6.0 product in unauthorized countries is a violation of law, may
disrupt telecommunications networks and devices, and can subject you to fines and
penalties by regulatory agencies.
DECT Enhanced Security
Poly is a member of the DECT Forum and has fully adopted their recommendations for
enhancements to security within all DECT products.
Poly DECT-based products now fully incorporate the latest recommendations on
Enhanced Security from the DECT Forum and ETSI. These improvements cover
registration, authentication, authorization and encryption procedures. Poly DECT
products are now secure against known vulnerabilities that were highlighted by the
public announcements of the Chaos Communication Congress in 2009.
Poly DECT products have been tested against and passed the DECT Forum security
certification requirements and consequently have been granted 'DECT Forum security'
logo certification.
Poly DECT products using the new enhanced version of DECT that includes these
security improvements are marked on the base with the DECT Forum security logo.
3
Overview
Your headset system
Your DECT™ headset system has 3-way connectivity to computer, desk phone and
mobile phone.
Headset overview
/
Note: Headset design may vary but function is the same.
Volume up
/ Call / Press to interact with Microsoft Teams (Teams model only, app
required)
Volume down
Power
Mute/unmute
Be safe
Please read the safety guide for important safety and regulatory information before
using your new device.
4
Base overview
Front view
5
4
3
2
1
6
7
8
1Desk phone button
2Computer button
3Back button
4Base screen
5Navigation wheel (scroll/press)
6Headset charge cradle
7Mobile phone button
8Mute button or Microsoft Teams button (varies by model)
Back view
FEDCBA
8
9
1
2
3
4567
1Headset charge cradle
2Back button
3Navigation wheel (scroll/press)
4Telephone interface cable jack
5Handset lifter jack
5
6Computer cable USB-C port
7Power jack
8Desk phone configuration switch
9Cradle release slider
Accessories
1 Electronic hookswitch cable (EHS cable) Electronically and automatically answers/
ends a desk phone call. Enables remote call control with your headset.
2 HL10 lifter Automatically lifts handset and returns it to the cradle. Enables remote
call control with your headset.
6
Connect your headset system
Using the diagram, connect the base to your computer, power outlet and desk phone's
headset port, if available. Otherwise, connect the base to your handset port.
FEDCBA OR
NO HEADSET PORT
HEADSET PORT
Desk phone Base configuration setting (on back of base)
Most phones A
Cisco phones D
Cisco phones with EHS cable A
Desk phone setup details
Your desk phone setup method varies by desk phone and connection accessories.
Choose a desk phone setup A, B, C or D and connect cables.
A Desk phone with dedicated headset port
7
• Connect one end of the telephone interface cable to the back of the base
• Connect the other end of the telephone interface cable into the dedicated headset
port on the desk phone
Important: Cisco phones use configuration D on the back of the base. Most other
phones use default configuration A. Use this setup if you are not using the HL10 lifter
or EHS cable. In this configuration, press both the headset button on your desk
phone and the call control button on the headset to answer or end calls.
B Desk phone (standard)
• Connect one end of the telephone interface cable to the back of the base
• Disconnect the handset coil cord from the base of the desk phone and re-connect
it to the telephone interface cable junction box
• Finally connect the remaining end of the telephone interface cable into the open
handset port on the desk phone
Important: Cisco phones use configuration D on the back of the base. Most other
phones use default configuration A.
Note: Use this setup if you are not using the HL10 lifter or EHS cable and your desk
phone does not have a dedicated headset port. In this configuration, manually remove
the handset on your desk phone and press the call control button on the headset to
answer or end calls.
C Desk phone + EHS cable (sold separately)
Important: Use configuration A on the back of the base, which works for most
phones including Cisco phones.
D Desk phone + HL10 lifter (sold separately)
8
Important: Cisco phones use configuration D on the back of the base. Most other
phones use default configuration A.
Position Your Base
The minimum recommended separation between your desk phone and the base is 6
inches.
The minimum recommended separation between the base and computer is 12 inches.
Incorrect position can cause noise and interference problems.
Note: Headset cradle may vary, but function is the same.
9
Fit and charge
Wear on the right or left
• To position the microphone on the right or left side, rotate the microphone boom up
and over. Bend the boom so it is approximately 2 finger widths from the corner of
your mouth.
• Gently flex the headband wider if the fit is uncomfortable on your ears.
Charge your headset
Place the headset in the charge cradle. The charging LED flashes when charging the
headset and remains steady when the headset is fully charged. Charge for at least 20
minutes prior to the first use.
Headset battery status
Determine your headset battery status:
• Listen to the voice prompts after powering on the headset
• With your headset idle, view the headset battery level on your base display's
homescreen
• View in Poly Lens Desktop App
• View headset LEDs while charging in your base charge cradle
Headset battery status Base display
homescreen or Poly
Lens Desktop App
Headset LED
while charging
Battery full
Battery high
Battery medium
Battery low
Battery critical
Tip: To reset the accuracy of the talk time alert, deplete the headset battery then charge
fully.
Talk Time
With a full charge, the headset provides up to 13 hours of talk time.
10
Este manual sirve para los siguientes modelos
1
Tabla de contenidos
Otros manuales de Auriculares de Poly
Poly
Poly Blackwire 5200 Series Manual de usuario
Poly
Poly Savi 7210 Office Manual de usuario
Poly
Poly Plantronics Voyager 5200 Office Manual de usuario
Poly
Poly Savi 7310 Manual de usuario
Poly
Poly Voyager 4245 Office Manual de usuario
Poly
Poly VOYAGER SURROUND 85 UC Manual de usuario
Poly
Poly Savi 8240 Office Manual de usuario
Poly
Poly EncorePro 300 Series Manual de usuario
Poly
Poly Savi 8210 Office Manual de usuario
Poly
Poly Voyager 5200 Series Manual de usuario
Poly
Poly Plantronics Voyager 5200 Office Manual de usuario
Poly
Poly Plantronics BackBeat Pro+ Manual de usuario
Poly
Poly VOYAGER 4200 Series Manual de usuario
Poly
Poly Blackwire 3300 Series Manual de usuario
Poly
Poly EncorePro 500 USB Series Manual de usuario
Poly
Poly Voyager Focus UC Manual de usuario
Poly
Poly Voyager Surround 80 UC Manual de usuario
Poly
Poly Savi 8210 Office Manual de usuario
Poly
Poly Blackwire 7225 Series Manual de usuario
Poly
Poly Savi 8210 Office Manual de usuario
