Polaris NG7 Manual de usuario
NG7
User Manual
NG7 User Manual Polaris 16/05/2017 3:40 pm Page 1
- 2 -
Thank you for purchasing the Polaris NG7.
Before operation, be sure to thoroughly read these instructions.
Keep these instructions with your vehicle records for future reference.
Warranty for this product is 3 years from date of purchase, however warranty will be voided if:
• The unit is tampered with, damaged or modified in any way.
• Reverse camera cable is cut or modified in any way.
• Reverse camera is subjected to over voltage.
• The Navigation SD card is damaged or tampered with in any way (this includes installing foreign
mapping or software onto the SD card).
Warranty Terms
The NG7 is covered for 3 years and includes:
• Defective Equipment • Defective Cables
Not Covered under warranty:
• Abuse • Improper installation
• Alteration to cables (this includes cutting of any cables) • Remote control batteries
• Accidents • Water Damage • Improper use • Labour
If you have any questions concerning the installation, warranty or the operation of the unit,
please contact Polaris on 1300 555 514.
We hope that you enjoy the Polaris NG7.
INDEX
Wiring Diagram ................................................. Page 3
Home Screen ..................................................... Page 4
Street Navigation .............................................. Page 5
Off Road Navigation ......................................... Page 5
DVR Function .................................................... Page 6-9
Camera Functionality.......................................... Page 10-13
USB .................................................................... Page 14-17
Set Up ................................................................ Page 18
Display .............................................................. Page 18
General ............................................................. Page 19
Date/Time ........................................................... Page 20-21
Specifications .................................................... Page 23
NG7 User Manual Polaris 16/05/2017 3:40 pm Page 2
- 3 -
Wiring Diagram
WIRING NOTES
• Please make sure that the correct reverse / front camera is connected to the correct camera
input on the wiring harness, otherwise the cameras may not appear according to the
NG7’s software sequence.
• Please make sure you connect the reverse trigger wire in order for the reverse camera to
appear on the screen when reverse gear is selected (you can still access caravan camera
whilst the car is in reverse as well, please see page 10).
• If you are connecting a caravan camera to the NG7, please see page 19 to make sure the
setting is switched on.
• If you are connecting a front camera, please see page 19 to make sure the setting is
switched on and to nominate a time interval for the front camera to appear after
reverse gear has been disengaged.
• The illumination wire is to be connected in order for the screen to dim when the vehicle’s
headlights are switched on.
• We recommend mounting the GPS external antenna on the dash either in the top left or
top right hand corner.
• Constant power is needed (yellow) so that the date and time holds its setting for the DVR
function.
• Please make sure you connect the GPS external antenna, otherwise the NG7 will not pick
up any satellites.
If you have any questions in regards to the wiring of the NG7, please do not hesitate to give
us a call on 1300 555 514.
FR CAM
REAR CAM
CARAVAN CAM
REVERSE (GREEN)
ILL (BROWN)
+12V-24V CONSTANT (YELLOW)
GND (BLACK)
ACC+ (RED)
Plugs into back of monitor
GPS Antenna - plugs into the
back of the monitor
NG7 User Manual Polaris 16/05/2017 3:40 pm Page 3
1 2
3 4
5
6 7 8
Home Screen
1. Street Navigation: Touch this icon to enter into street navigation.
2. Off Road Navigation: Touch this icon to enter into off road navigation.
3. Clock: This feature displays the current time.
4. DVR: Touch this icon to enter into the built in crash cam function.
5. Volume: Touch this icon to adjust volume or to mute volume.
6. Caravan: Touch this icon to view reverse, caravan or forward vision camera at any time.
7. Media: Touch this icon to enter into the USB function.
8. Setup: Touch this icon to enter into settings.
- 4 -
NG7 User Manual Polaris 16/05/2017 3:40 pm Page 4
- 5 -
Street Navigation
Off Road Navigation
For a detailed user guide please download the TomTom w/igo user
manual from www.mypolaris.com.au
For a detailed user guide please download the EziOzi HEMA user
manual from www.mypolaris.com.au
NG7 User Manual Polaris 16/05/2017 3:40 pm Page 5
1. Recording: When this icon flashes red the DVR is in record mode.
2. Home: Will take you back to the main menu.
3. SD: SD Card icon indicates that the unit has registered the SD card.
4. Lock: Touch this icon to lock the current time interval recording.
5. Audio: Touch this icon to turn record audio on/off.
6. Photo: Captures a photo.
7. Picture Reel: Touch this icon to view photos captured on the NG7.
8. Record: Toggle between record on/off.
9. Video Reel: Touch this icon to view footage captured on the NG7.
10. Format: Touch this icon to format the SD card — WARNING: Will wipe all the data from SD card.
- 6 -
DVR Function
The DVR function will start recording as soon as you power the NG7 on.
The Dash cam records in 5 minute intervals and once the card has reached capacity, it will start re-recording
over the intervals .
IMPORTANT: To make sure that you have the correct date and time for your footage, please see page 20
so you can set it up correctly according to your time zone.
2
3 5
4
1
67 8 9 10
NG7 User Manual Polaris 16/05/2017 3:40 pm Page 6
- 7 -
Viewing recorded footage and photos
Photo reel
Video reel
You can view the recorded footage on the NG7 by selecting the photo reel or the video reel
from the DVR main menu.
DVR Function
1. Home.
2. Back to previous screen.
3. Lock selected footage so that it
cannot be overridden.
4. Will take you back to photo reel.
5. Filter back through photos.
6. Enlarge selected photo.
7. Filter forward through photos.
8. Delete selected photo.
Note: You can also select different
photos by touching on the desired
photo.
1. Home.
2. Back to previous screen.
3. Lock selected footage so that it
cannot be re-recorded over.
4. Will take you back to video reel.
5. Filter back through videos.
6. Play footage.
7. Filter forward through videos.
8. Delete selected video.
Note: You can also select different
videos by touching on the desired
video.
1
1
2
3
2
3
45678
45678
NG7 User Manual Polaris 16/05/2017 3:40 pm Page 7
- 8 -
Photo playback
Video reel
DVR Function
1. Home.
2. Back to previous screen.
3. Lock selected footage so that it
cannot be overridden.
4. Filter back through photos.
5. Filter forward through photos.
6. Delete photo.
1. Home.
2. Back to previous screen.
3. Lock selected footage so that it
cannot be re-recorded over.
4. Filter back through video.
5. Play video.
6. Pause video.
7. Filter forward through photos.
8. Delete video.
12
3
45678
12
3
456
NG7 User Manual Polaris 16/05/2017 3:40 pm Page 8
- 9 -
1. Load the Micro SD card into your computer.
2. Open the desired folder (photo or recording).
3. Click on the footage required and simply drag and drop onto your computer.
You will notice that the SD card has multiple video files, this is normal. This is to make it easier for you to
find your desired footage rather than having to filter through one long recorded video.
Warning: If you rename any of the files on the SD card, it will automatically lock the footage. These files
will not be recorded over when you insert the SD card back into the NG7.
Retrieving Data
DVR Function
NG7 User Manual Polaris 16/05/2017 3:40 pm Page 9
- 10 -
The ideal camera setup for the NG7 is a reversing camera, front camera and caravan/trailer camera
Please see wiring diagram on page 3 to make sure that all your cameras are plugged into the correct
inputs.
Camera functionality
If wired up correctly, the camera that is plugged into the reverse camera input will trigger when reverse
gear is engaged.
Please note: If you have also have a caravan/trailer camera plugged in, you can still access this camera
whilst in reverse, please see below for further instructions on how to do this.
Reverse Camera
When the Reverse camera is triggered, if you touch the screen it will bring up the above icons.
1. Brightness: Will bring up brightness, contrast, colour and saturation settings.
2. Guidelines: Will add guidelines on the screen.
3. Caravan camera: Will switch to the caravan / trailer camera whilst in reverse.
1
2
3
NG7 User Manual Polaris 16/05/2017 3:40 pm Page 10
Tabla de contenidos
Otros manuales de Sistema de navegación para automóviles de Polaris
