PoeWit WS-2 Manual de usuario
poewit.com
QUICK START GUIDE
WS-2 MODEL
CLOUD INTELLIGENT
WALL SWITCH
POWERED BY PoE
poewit.com
INSTALLATION AND SETUP
1
BEFORE YOU START
1) PACKAGE CONTENTS
1. Glass panel wall switch
2. Wall switch mounting bracket
3. Hardware accessories bag
4.Quick Start Guide
2) PRODUCT DESCRIPTION
2-A. PoEWit PoE powered wall switch is 802.3at (Type 2, 30W)
compliant and is designed to mount into a standard single-gang
low-voltage bracket (not-included). The wall switch provides a
capacitive touch interface to control (dimming, on/off)
PATTERN
ITEM
QUANTITY
Glass panel wall
switch
1
Wall switch
mounting
bracket Quick start
1 1
OS-458/A
PA SS IVE INF RA -RED
SE NS OR
FO R AU TO MA TION
CO NT RO L
Glass Wall Switch
WS-2
PATTERN
ITEM
QUANTITY
poewit.com
INSTALLATION AND SETUP
2
PoEWit lighting devices. In addition, the wall switch is a local
proxy to control PoEWit devices in case cloud connectivity
is temporarily lost.
2-B. Unique construction with ON and OFF touch areas that provide
hold-to-dim feature. No AC power is required.
2-C. Dimensions, See Figure 1 below
72.6mm (2.86in)
119.3mm (4.70 in)
35.05mm (1.38in)
Fig 1
poewit.com
INSTALLATION AND SETUP
3
3) INSTALLATION AND WIRING
1. Select a proper location and insert a single gang low-voltage
racket (not included)
2. Install an Ethernet cable (CAT5/6) from your PoEWit PoE Switch to
the location selected for wall switch installation. (Figure 2).
Figure 2. Single Gang Low-Voltage Bracket with terminated Ethernet Cable
poewit.com
INSTALLATION AND SETUP
4
3. Install the PoEWit wall switch mounting bracket. Verify the orientation
as embossed on the wall switch (UP^ and “AWAY FROM WALL”) are
readable once mounted. See Figure 3 below
Figure 3. Wall Switch Assembly View
poewit.com
INSTALLATION AND SETUP
5
4. Plug PoE-enabled ethernet cable into wall switch. Verify GREEN
LED illuminated on the jack showing PoE power and AMBER LED
showing local network connectivity. Cloud connection is required for
initial setup of the device. If cloud-connection is available, a blue led
will light up that is visible through the ventilation slots on the left side.
5. Attach wall switch to mounting bracket top rst. Verify that the wall
switch is oriented with the single slot to the bottom. Wall switch will
clip into the bracket on the bottom. See Figure 4
Figure 4
Match slot on Wall Switch to tab on bracket
poewit.com
INSTALLATION AND SETUP
6
3) CONFIGURATION INSTRUCTIONS
Power up the device and you should be automatically connected
to the Internet. You are now ready to download and install our App.
You can search PoEWit in the Apple App Store or Google Play to
get the App.
NOTE: Your device and mobile phone both must have an internet
connection through the same external IP address and must be
on the same local subnet.
After initial configuration, a PoEWit wall switch and/or PoEWit
motion detector PIR can control the lights should the internet
conection go down.
Tabla de contenidos
Otros manuales de Cambiar de PoeWit
