PNI PMR R60 Manual de usuario
PNI PMR R60
PMR radio
EN User manual ......................................................... 3
BG Ръководство за употреба ............................. 12
DE Benutzerhandbuch .............................................. 23
ES Manual de usuario ............................................... 32
FR Manuel utilisateur ............................................... 41
HU Használati utasítás .............................................. 50
IT Manuale utente .................................................. 59
NL Handleiding ........................................................ 69
PL Instrukcja obsługi ............................................... 78
RO Manual de utilizare ............................................. 87
English3
Special warnings
• Do not touch the antenna while transmitting.
• Do not open the housing of the radio and do
not repair the radio by yourself. In case of
failure, contact a specialized service center.
• The device generates interference that could
aect the operation of televisions or radios. In
case of interference, move the radio away from
the aected device.
• In order not to damage the radio, do not
transmit for too long.
• Do not use the radio in environments with
corrosive or flammable substances.
• Do not clean the radio with corrosive chemical
agents or with water. Use only a dry or slightly
damp cloth to clean the radio housing.
English 4
Technical specifications
Frequency 446MHz
Transmission power 0.5W
Channels 16
Power supply Li-Ion battery
3.7V 1200mAh
Dimensions 53 x 25 x 145 mm
Weight 102 g
Antenna length 45 mm
Working temperature -26°C ~ +80°C
Connector USB-C (for
battery charging)
Channel spacing 12.5kHz
Modulation FM
Current in standby ≤20mA
Transmitter
Frequency tolerance ±3ppm
Current ≤1.3A
English5
Frequency deviation ±5kHz
Audio distortion <5%
Adjacent channel power <-60dB
Residual wave radiation <-36dBm
Receiver
Sensitivity <-122dBm (12dB
SINAD)
Audio power ≥0.5W
Current ≤380mA
Audio distortion <5%
Adjacent channel
selectivity ≥60dB
Anti-interference
intermodulation ≥60dB
Functions
TOT (Timeout Timer) Default 120 s.
Squelch Default level no. 3
Battery saver Yes
Scan Yes, on channel 16
English 6
Product presentation
13
4 5
12
1
11
10
9
8
3
7
6
2
English7
1. Antenna
2. PTT button
3. Volume -
4. USB Type C port
5. Charging status
indicator (red -
charging in progress
/ green - charging
completed)
6. PTT button
7. On/O
8. Volume +
9. Microphone
10. Speaker
11. Transmission
/ reception LED
indicator (reception
- green / emission
- red)
12. Channel selector
13. SOS alarm
Turn the radio on/o
To turn on the radio, long press the on/o button.
You will hear a confirmation beep, then the voice
prompt announces the current channel.
To turn o the radio, long press the on/o button.
You will hear a confirmation beep.
Channel selection
Rotate the channel change knob clockwise or
counterclockwise until you reach the desired
English 8
channel. After each spin, you will hear the voice
prompt announces the selected channel.
Volume control
Press the Volume + or Volume - keys to increase
or decrease the volume. With each press, you
will hear a beep. When you reach the lowest or
highest volume level, you will hear a confirmation
beep of a dierent tone.
Transmission/Reception
Press the side PTT key or the front PTT key to
transmit. The indicator LED on the top of the
radio will light up red. Release the key to receive.
When the radio receives a signal, the LED lights
up green constantly. During the entire operation
of the radio in reception mode, the green LED
flashes rarely.
Monitor
Long press the Volume + key to activate the
English9
channel monitoring function. Release the key to
exit.
Key lock
Long press the Volume - key to lock the keys.
You will hear a confirmation sound. Now all keys
except PTT keys are locked. Every time you press
a key, you will hear a sound that warns you that
the keys are locked.
Long press the Volume - key to unlock the keys.
You will hear a short confirmation beep.
Channel scan
Rotate the channel change knob until you reach
channel 16. You will hear the voice prompt
“Scanning”. The radio starts scanning all channels
and will stop when it receives a valid signal.
Battery saving function
When the battery voltage is 3.35V, you will be
warned every 30 seconds.
English 10
When the battery voltage drops below 3.2V, the
radio will stop automatically.
Troubleshooting
1. The radio does not turn on.
Charge the battery.
2. The battery discharges quickly after charging.
Battery life has expired. Contact a service center
to replace the battery.
2. I cannot talk to other members of the group.
Check if you are using the same frequency and
the same channel as the other members.
Check if you are not too far from the other
members.
3. The communication distance is too short.
Check that the squelch level is not too high (from
the programming software, available for purchase
separately).
Tabla de contenidos
Idiomas:
Otros manuales de Radio de PNI
PNI
PNI ESCORT HP 6500 Manual de usuario
PNI
PNI Clementine 8480BT Manual de usuario
PNI
PNI ESCORT HP 6500 Manual de usuario
PNI
PNI Escort HP 8024 ASQ 12V-24V Manual de usuario
PNI
PNI Escort HP 82 Manual de usuario
PNI
PNI PMR R40 Pro Manual de usuario
PNI
PNI R40 Pro Manual de usuario
PNI
PNI Escort HP 9001 ASQ Manual de usuario
PNI
PNI Escort HP 2020 Manual de usuario
PNI
PNI Escort HP 446 Manual de usuario
PNI
PNI ESCORT HP 9500 Manual de usuario
PNI
PNI Escort HP 9700 USB Manual de usuario
PNI
PNI Escort HP 8001L Manual de usuario
PNI
PNI ESCORT HP 62 Manual de usuario
PNI
PNI ESCORT HP 8024 ASQ Manual de usuario
PNI
PNI Escort HP 8000L Manual de usuario
PNI
PNI Escort HP 8000L Manual de usuario
PNI
PNI Escort HP 8000L Manual de usuario
PNI
PNI R40 Pro Manual de usuario
PNI
PNI RD290 Manual de usuario
