Platin Gate Technology Platin Pro TXD Manual de usuario

1
Platin Pro TXD Matrix
TXD Matrix
4 Zone Wireless Audio Matrix
User Manual
© 2018 Platin Gate Technolo y

2
Platin Pro TXD Matrix

3
Platin Pro TXD Matrix
TABLE OF CONTENTS
Inside the Box ................................................................................................................................................................. 4
Product Map ................................................................................................................................................................... 4
Source Guide .................................................................................................................................................................. 5
Keypad codes and display ............................................................................................................................................ 6
CH4 vs. CH8 modes ....................................................................................................................................................... 6
First time set up .............................................................................................................................................................. 7
Speaker Setup ................................................................................................................................................................ 8
PPA Series Speakers .................................................................................................................................................. 9
WS Series Speakers ................................................................................................................................................. 10
TXD Pairin ............................................................................................................................................................... 10
TXD Source set up ....................................................................................................................................................... 11
Zone Control ............................................................................................................................................................. 11
Examples: .................................................................................................................................................................. 13
Useful commands explained .................................................................................................................................. 13
DISPLAY INFO & SETTINGS .................................................................................................................................... 14
FIRMWARE UPGRADE ............................................................................................................................................. 14
Windows Interface ....................................................................................................................................................... 15
Set up ......................................................................................................................................................................... 15
Downloadin Windows software .......................................................................................................................... 15
Connectin the USB to RS232 cable to PC and TXD .......................................................................................... 15
Windows Console 4CH
M
ODE
................................................................................................................................ 15
Windows Console 8CH
M
ODE
................................................................................................................................ 16
Windows Console A
DVANCED SETTINGS
................................................................................................................. 17
Windows Console A
DVANCED SETTINGS
................................................................................................................. 18
Appendix ....................................................................................................................................................................... 19
Troubleshootin Guide ............................................................................................................................................... 20
Important Safety Information ..................................................................................................................................... 21
Warranty ........................................................................................................................................................................ 24

4
Platin Pro TXD Matrix
INSIDE THE BOX
• TXD Matrix
• Universal power adaptor
• 2 antennas
• RS232 to USB cable
• User manual
• Quick code reference
PRODUCT MAP

5
Platin Pro TXD Matrix
SOURCE GUIDE
*MIC/MIXER 2 input is layered over all zones re ardless of source. MIC/MIXER 2 is added at 50% volume of zone
Source guide explains each source input and defines devices used

6
Platin Pro TXD Matrix
KEYPAD CODES AND DISPLAY
Product map
CH4 VS. CH8 MODES
4 Channel mode or CH4 is to be used when 4 independent zones are required or 4
different sources broadcast in 4 different areas. It can also be used to control
volume of the same source in 4 zones. Examples of this include sports bars
showin multiple events in different areas or rooms that require different audio for
private events.
8 Channel mode is used exclusively for theater surround sound in 5.1 or 7.1
format. CH8 uses HDMI 1 or USB audio to broadcast up to 8 individual channels
with built in Dolby and DTS decodin .

7
Platin Pro TXD Matrix
FIRST TIME SET UP
*Note - Platin Pro TXD Matrix works only with Platin Pro PPA, WS series speakers and ARX series receivers.
Before powerin on your TXD you must prepare your speakers and zones. It is advised to set up speakers
at table hei ht before mountin in hi h or difficult to reach spaces. Plu in and turn on all speakers for your
install near the final location. All speakers should be in place and powered on prior to startin set up. It is
also advised to map out your zones carefully to maximize audio covera e and minimize zone overlap.
Once speakers are placed and powered:
PPA Series Speakers and Subs, ARX Series & WS G2 Series

8
Platin Pro TXD Matrix
SPEAKER SETUP
1. 100-240V power - power cable provided in box for your re ion
2. Power on/off
3. Associate button - reset and erase previous paired transmitters - hold for 3 seconds for audible tone
4. Wireless or wired switch - if you are receivin audio via cable from another PPA speaker switch to
wired. If you are receivin audio via the Wireless module select Wireless. This is useful for extendin
ran e of a zone beyond the wireless reach
5. Left/Mono/Ri ht - select which audio channel you need for this speaker
6. Set channel and speaker number - used for Platin Pro TXD and Platin Pro Wi-Fi Brid e, see
transmitter user manual for instructions. Adjust speaker ain - use to adjust individual speaker if you
need to balance several speakers in a room (0-99). Hold CH button down for 2 seconds then use
CH and SPK buttons to adjust up and down
7. Line in / Line out - usin Phoenix connectors supplied you can daisy chain speakers to ether, first
speaker in the chain will receive audio wirelessly and send to the next via line out.
8. Service port - used by Platin technicians or licensed dealers for up rades and dia nostic
*note – layouts for PPA series speakers vary and pictures provided may not show exact locations on your speakers. Refer to your
speaker user manual for further details

9
Platin Pro TXD Matrix
PPA SERIES SPEAKERS
1. Find the Associate button, press and hold until you
hear a tone. This erases any previous memory that
may be in the speaker.
2. The LED display should read “00”, Wireless/Wired
switch set to wireless and set L/M/R to M unless
you need to define stereo channels L=left,
M=mono (combined left and ri ht) or R=ri ht.
*note – For lar e public spaces where audio meant to be heard properly in all areas we su est settin speakers to mono
3. Set your zone – press the SPK button to set zone
number. Zone 1 = 01, Zone 2 = 02 and so on.
4. Volume adjust – press and hold the CH button until
you see “50” adjust the volume up with the CH
button, down with the SPK button. We recommend
settin you speakers between 80 and 99 to allow
you the most flexibility from the TXD.
5. Power off the speaker for 3 seconds and power on
a ain. If your zone # is correct move to the next
speaker and repeat.

10
Platin Pro TXD Matrix
WS SERIES SPEAKERS
1. Find the Associate button, press and hold until you hear a tone. This
erases any previous memory that may be in the speaker.
2. For G1 WS 30 speakers they are preset to Mono and assi ned to
CH1, if you need Left or Ri ht speakers or if you need to set them to
a different zone contact your dealer for other preconfi ured options.
TXD PAIRING
1. Before you power on your TXD, connect a 3.5mm to RCA to (AN1). Plu the 3.5mm end into your
phone or computer that has music files you can use for test. Play music with computer/phone
volume at 50%
2. Power on the TXD, you will see the followin displays as it boots up.
a. Once the TXD is displayin the source/zone map press source 4x.
This will display the number of speakers connected. Due to PPA
speakers usin both the left and ri ht channels these speakers will
re ister as 2 per speaker meanin 8 speakers found is 4 physical speakers.
b. If the correct number of speakers are re istered o to “d.”. If you
are missin speakers enter “9000” + input to add speakers TXD and
return to step “a.” If you have still not found all the speakers. Enter
“0001” to chan e all zones to source AN1 (RCA 1). Play music from your device
*WARNING – ensure the volume of your device, and the TXD are below 50% and slowly turn up as required.
c. Check each speaker for audio and identify which speaker(s) are not connected. Speakers
that are not connected will have 2 flashin reen LED.
d. Evaluate the location of the speaker. Are there thick concrete or steel walls between the TXD
and the speaker? Is the TXD over 20m from the speaker (65’)? If so, reposition the speaker
within the recommended distance and return to step “a.”
Tabla de contenidos
Idiomas:
Manuales populares de Transmisor de otras marcas

Dejero
Dejero EnGo 3x Manual de usuario

Rosemount
Rosemount 4600 Manual de usuario

Speaka Professional
Speaka Professional 2342740 Manual de usuario

trubomat
trubomat GAB 1000 Manual de usuario

Teledyne Analytical Instruments
Teledyne Analytical Instruments LXT-380 Manual de usuario

Rondish
Rondish UT-11 Manual de usuario











