Plantronics M100 Bluetooth Manual de usuario
LEARN
MORE
M100™Bluetooth®Headset
TAKE A GOOD LOOK
CALL BUTTON
• Takeacallorendit (1 tap)
• Redial(2 taps)
• Initiatephone’svoice-dialing
(2-seccond press until tone heard)
• Reconnectlostconnection (1 tap)
• Activatepairingafterinitialsetup
(press until LED flashes red/blue)
• Activatemultipoint (press while
powering on)
• Transferacallto/fromheadset
(1-second press while on a call)
POWER SWITCH
• On (slide to reveal black)
• Off (slide to reveal red)
MICRO USB CHARGING PORT
• WithACcharger:
30 minutes (2 hours talk time)
90 minutes (full charge)
• Bestperformancewhenfullycharged
VOLUME/MUTE BUTTON
• Min-Lo-Med-Hi-Max
(1 tap per level change)
• Mute:on/off (1-second press)
LED
• Charging (solid red)
• Fullycharged (solid blue)
• Lowbattery (2 red flashes, 2 tones)
• Criticallylow (3 red flashes, 3 tones)
• Multipoint (on=2 blue flashes,
and off=1 blue flash)
Besafe!Pleasereadthesafetyguide
beforeusingyournewheadset.
CONNECT TO YOUR PHONE
“Pairing” connects your
headset to your phone.
“Multipoint” lets you use this
headset with two phones.
(Activate this feature before
pairing your second phone.)
1. READY
Activate the Bluetooth feature on
your phone, then use the phone’s
settings to add/search/discover
new Bluetooth devices.
iPhone: Settings > General >
Bluetooth>On
(starts the search for devices)
BlackBerrysmartphone®: Settings/
options > Bluetooth: On >
Search for devices
VIDEO TUTORIAL IN USA:
www.plantronics.com/pairing
2. SET
FirstTime:
With headset turned off, activate
Bluetooth pairing mode by sliding
Power switch on. The LED flashes
red/blue to indicate pairing mode.
ActivateMultipoint:
While pressing the Call button, turn
on the headset and keep pressing
the Call button until LED flashes
blue twice. (Repeat to deactivate.)
PairingNewPhone/
ReconnectingOriginal:
Turn on the headset then press
and hold the Call button until the
LED flashes red/blue.
3. CONNECT
Select “1xxPlantronics” from the
list of Bluetooth devices shown on
your phone.
If phone asks for a passcode, enter
four zeros (0000). You may see
**** on screen.
Some phones also ask to confirm
headset connection after pairing.
Headset LED will stop flashing red/
blue once your phone and headset
are successfully paired/connected.
FIND YOUR GROOVE
The loop of the gel eartip tucks into the back curve of your
ear for a stable fit.
Try on the headset. The eartip is positioned to suit most
people, but you may want to rotate it to best fit your left or
right ear.
The gel eartip and speaker click into matching grooves so
the eartip doesn’t move out of place during use.
The loop on the gel eartip should point away from the
headset. (Do not rotate the eartip too far.)
ForLeftEar
ForRightEar
MIX AND MATCH FOR BEST FIT
If the gel eartip feels loose or tight in your
ear, then change it. To replace the medium gel
eartip for small or large, pull the loop of the gel
eartip to remove it. (Don’t pull on the speaker
base and stem.)
Using your thumb, tuck the bottom of the
eartip over the speaker and pull the loop of
the eartip over the speaker. (Don’t push the
speaker through the gel eartip.)
If you aren’t familiar with this style of gel
eartip, clip on the earloop to the stem for
extra stability.
VIDEO TUTORIAL:
www.plantronics.com/M100t
MORE ABOUT MULTIPOINT
Plantronics M100 supports multipoint
technology, which allows you to use one
headset with two different Bluetooth
mobile phones.
To pair your headset to a second phone,
see “Connect to Your Phone.”
How to Initiate a Call
When multipoint is on, the headset
controls initiates or redials a call from
the phone that last made an outgoing
call.
To use the second paired phone in-
stead, make the call using the controls
on that phone. The second phone acti-
vates its link with the headset.
NOTE: The headset cannot place a cur-
rent call on hold while answering a call
from the second phone.
How to Answer a Call While Talking on
the Other Paired Phone
To answer a second call on the other
phone, the current call must be termi-
nated or transferred back to the first
phone. To transfer the call, see “Take a
Good Look.”
If you choose not to answer, the sec-
ond call will go to voice mail.
Answeringanincomingcallfrom
thesecondphone,whilealreadyon
anothercall:
1. Before answering the second call,
end the first call by tapping the Call
button.
2. Answer the second call by tapping
the Call button again.
TIP To avoid issues with Multipoint,
use the Call button on the headset
rather than your phone controls.
LISTEN TO THE VOICE
WHAT YOU’LL HEAR WHEN YOU’LL HEAR IT
PowerOn After sliding the Power switch to “on” position
PowerOff After sliding the Power switch to “off” position
TalkTime:(5hrs,4hrs,
3hrs,2hrs,1hr)
After sliding the Power switch to “on” position
BatteryLow When you have approximately 30 minutes left before
the battery must be recharged
RechargeHeadset When you have approximately 15 minutes left before
the battery must be recharged
Phone1Connected After sliding the Power switch to “on” position or recon-
necting a dropped Bluetooth connection
Phone2Connected After pairing a second phone using multipoint feature
Pairing While the headset and phone are trying to pair/connect
PairingSuccessful After the headset and phone are successfully paired/
connected
PairingIncomplete,
RestartHeadset
After the headset and phone tried to pair but failed
VolumeMaximum When the highest volume level is reached after tapping
Volume button
MuteOn After pressing Volume button for 1 second during a call
MuteOff When on mute, after pressing Volume button
for 1 second
LostConnection When the phone loses the Bluetooth connection with
the headset
MultipointOn After activating the feature by pressing Call button
while sliding the Power switch to “on” position
MultipointOff After deactivating the feature by pressing Call button
while sliding the Power switch to “off” position
This headset whispers various status
alerts when you power on/off, run low
on talk time, or lose/reconnect the
Bluetooth connection to your phone.
TIPS
Pair/Connect Just Once
Pairing is a one-time process unless
your phone loses the connection or
you want to pair a new phone.
Watch for Flashing Red LED
This headset will visually warn you
when your battery is low and needs to
be recharged.
Continue a Call Without the Headset
If you need to continue a call without
using your headset, just press the Call
button for 1 second and the call trans-
fers back to your phone. You will hear
a tone to confirm the transfer.
Stay Near Your Phone:
Bluetooth has a working “range” of
up to 33 feet between the phone and
headset before audio degrades and
the connection is lost.
Know How to Reconnect:
Your headset tries to reconnect a lost
connection. If it can’t, then tap the Call
button once or manually reconnect via
the phone’s Bluetooth device menu.
Reset if You Cannot Reconnect
If your headset was working but now
won’t connect, remember that newer
phones are like small computers, so
they may become corrupt over time
and you may need to reset them every
so often.
Simply turn your phone off and re-
move the battery for a few seconds,
then replace the battery and turn it
back on again. If this does not resolve
the issue, delete the pairing informa-
tion for your M100 headset and pair it
with your phone again.
Sound Your Best:
For best voice pickup, always check
that the headset points towards the
corner of your mouth.
SPECIFICATIONS
TalkTime Up to 6 hours
StandbyTime Up to 10 Days
OperatingDistance(Range) Up to 33 feet (10 meters), Class II
HeadsetWeight 9 grams
HeadsetDimensions 55 x 18.5 x 8.1 mm
ChargeConnector Micro USB charging
BatteryType Rechargeable non-replaceable lithium ion polymer
ChargeTime(Maximum) 90 minutes for full
PowerRequirements 5V DC – 180mA
BluetoothVersion 2.1 specifications with EDR
BluetoothProles Hands-Free (HFP) Profile 1.5 and Headset (HSP) Profile 1.1
OperatingTemperature 32°F - 104°F (0 - 40°C)
StorageTemperature 32°F - 104°F (0 - 40°C)
ChargingTemperature 32°F - 104°F (0 - 40°C)
NEED MORE HELP?
24-hour support in USA:
1-866-363-BLUE (2583)
FAQs:
www.plantronics.com/M100faq
1-year limited warranty details:
www.plantronics.com/warranty
© 2010 Plantronics, Inc. All Rights Reserved. Bluetooth is a registered trademark of
Bluetooth SIG, Inc. and any use by Plantronics is under license. All other trademarks
are the property of their respective owners.
Patents US 5,712,453; Patents Pending AM84466-01 (08/10)
Z109
N10687
Otros manuales para M100 Bluetooth
2
Este manual sirve para los siguientes modelos
1
Tabla de contenidos
Otros manuales de Auriculares de Plantronics
Plantronics
Plantronics Voyager Manual de usuario
Plantronics
Plantronics MX300 Manual de usuario
Plantronics
Plantronics P31-U10P Manual de usuario
Plantronics
Plantronics EXPLORER 220 SERIES Manual de usuario
Plantronics
Plantronics gamecom 818 Manual de usuario
Plantronics
Plantronics CS7 Series Manual de usuario
Plantronics
Plantronics Blackwire 200 Dimensiones
Plantronics
Plantronics Gamecom 307 Manual de usuario
Plantronics
Plantronics Voyager PRO UC v2 Manual de usuario
Plantronics
Plantronics Headset MX150/MX153 Manual de usuario
Plantronics
Plantronics Encore Manual de usuario
Plantronics
Plantronics Audio 355 Manual de usuario
Plantronics
Plantronics WG101/B Manual de usuario
Plantronics
Plantronics SupraPlus CS351N Manual de usuario
Plantronics
Plantronics CT10 Manual de usuario
Plantronics
Plantronics ML20 Manual de usuario
Plantronics
Plantronics Blackwire 7225 Manual de usuario
Plantronics
Plantronics Voyage Legend UC Manual de usuario
Plantronics
Plantronics BackBeat GO Manual de usuario
Plantronics
Plantronics M175C Manual de usuario
