Plantronics .Audio 995 Manual de usuario
Plantronics .Audio™995
User Guide
ii
Welcome
Congratulations on purchasing your new Plantronics .Audio™995.
This User Guide contains instructions for setting up and using the
.Audio 995. Please refer to the separate For Your Safety guide for
important safety, charging, battery, and regulatory information prior
to installation or use.
Getting Assistance
The Plantronics Technical Assistance Center is ready to assist
you. You can find answers to frequently asked questions, ask
a question using e-mail, receive service over the Internet, or speak
directly with a representative.Visit www.plantronics.com/support or call
your country support line mentioned at the back of this user guide.
Registering Your Product
Visit www.plantronics.com/productregistration to register your
product online so we can provide you with the best service and
technical support.
iii
Contents
Range ...............................................................................................iv
Package Contents and Features...................................................... 1
Charging Your Headset Using the USB Charger.............................. 2
Using Your Headset.......................................................................... 3
Pairing Your Headset........................................................................ 4
How to Manually Pair Your Headset and Adapter................... 4
Headset Controls.............................................................................. 5
Operating Systerms Configuration................................................... 6
Indicator Lights................................................................................. 8
Product Specifications ..................................................................... 9
Troubleshooting ............................................................................. 10
iv
Important Note on Wireless Range
The .Audio 995 headset has a wireless range of
up to 12 meters. However, wireless performance
may be affected by nearby objects including walls,
metal items, and other wireless devices. When you
move the headset to the edge of its wireless range,
audio may become distorted and will eventually cut
out. Move closer to the wireless adapter to restore
clear audio.
1
Package Contents and Features
Volume Up
Indicator Light
Play/Pause
Microphone
Volume Down
Track Skip Forward/
Fast Forward
Power On/Off
Connect/Pair
Indicator Light
Wireless Adapter
Mute Microphone
2
Charging Your Headset Using the USB Charger
Before using your headset for the first time,
charge it for at least one hour. A full charge takes
approximately three hours.
1 Connect the charger cable to the headset.
2 Plug the charger into the USB port on your
computer.
While your headset is charging the indicator glows
red. When your headset is fully charged, the indicator
turns off.
NOTE Charging time depends on the amount of
power your USB device provides.
CHARGING TIME
3-4 hours ................
Full charge
1 hour .....................
Minimum charge
before first use
3
Using Your Headset
Congratulations, you can now listen to your favorite music or talk with friends and family using your new
wireless headset.
Using Your Headset
1 Make sure that your headset is fully charged. When fully charged, the red indicator light
turns off.
Do not use your headset while it is connected to the charger.
2 Plug the wireless adapter into a USB port on your computer.
Your computer and USB hub (if using) should be turned on.
NOTE When not using the headset and adapter, you can remove the adapter safely by just unplugging
it from the USB port.
3 After removing your headset from the charger, press the Power button for two seconds to
turn the headset on.
The headset and the adapter should connect immediately, and the indicator lights on both headset and
wireless adapter will be solid blue. If you cannot hear anything through your headset, try adjusting the
volume up or restarting the media application.
NOTE If steps 1 through 3 do not work, refer to “Pairing Your Headset” on page 4 to manually pair your
headset and adapter.
4
Pairing Your Headset
How to Manually Pair Your Headset and
Adapter
Your headset and adapter are factory pre-paired,
and should automatically connect with each
other. Should your headset and adapter become
unpaired, you can initiate pairing manually:
1 Press and hold the Power button on the
headset and the Connect button on the
adapter for 4 seconds.
The indicator lights on the headset and adapter
will rapidly flash blue.
2 The headset and adapter will automatically
attempt to pair.
If the pairing is successful the indicator lights
will glow solid blue; if unsuccessful, both
headset and adapter will stay in pairing mode.
If manual pairing was unsuccessful, and you want
to re-attempt the pairing process, you must first
take your headset and adapter out of pairing
mode.
3 Turn headset off.
4 Single press the Connect/Pair button on
the adapter, then repeat steps 1 and 2.
NOTE If your headset and adapter are separated
and lose their connection after being successfully
paired, they will automatically reconnect when
they come back into range of each other. If they
remain out of range for more than 30 seconds, the
headset will go into sleep mode, but will reconnect
automatically with the adapter once it is back in
range. If the headset is out of range for more than
15 minutes, it automatically shuts off.
5
Headset Controls
Turn the headset
on/off
Press Power button for 2 seconds
Adjust volume Increase: Press +
Decrease: Press -
Minimum volume: Continually press -
Pause music: Press
WARNING Do not use headsets at high volumes for an extended period of time.
Doing so can cause hearing loss. Always listen at moderate levels.
See www.plantronics.com/healthandsafety for more information on headsets
and hearing.
Muting the
microphone
Mute: Lift the boom to full stop.
Unmute: Lower the boom.
CAUTION Do not force the boom past its upper or lower limits.
Music controls Press to Play or Pause music.
Press to skip track forward.
Press and hold to fast forward.
NOTE Some applications, such as iTunes, must be the active window in order for
play, pause and skip to work properly.
6
Operating Systems Configuration
Your .Audio 995 headset works with any USB-
compliant computer. The headset will automatically
be set as the active audio device once the wireless
USB Adapter is plugged in. Below are details on
how to set the audio device for the most popular
operating systems.
NOTE On-ear controls may not function properly
with operating systerms earlier than Windows XP.
Windows XP®
1 Go to Start > Control Panel > Sounds and
Audio Devices.
2 On the Audio tab, select “Plantronics
Wireless Audio” as the Sound Playback
and Sound Recording device.
3 On the Voice tab, select the “Plantronics
Wireless Audio” as the Voice Playback and
Voice Recording device.
4 On the Volume tab, adjust the Volume
Slider as necessary. Do not select the
Mute option.
5 Select OK.
Otros manuales para .Audio 995
4
Tabla de contenidos
Otros manuales de Auriculares de Plantronics
Plantronics
Plantronics AWH450N Guía de referencia
Plantronics
Plantronics C725 Manual de usuario
Plantronics
Plantronics CS7 Series Manual de usuario
Plantronics
Plantronics Voyager 6200 UC Manual de usuario
Plantronics
Plantronics M170 Manual de usuario
Plantronics
Plantronics Voyager Legend B335 Manual de usuario
Plantronics
Plantronics Savi 400 Dimensiones
Plantronics
Plantronics Blackwire 710 Manual de usuario
Plantronics
Plantronics Savi W740 Manual de usuario
Plantronics
Plantronics Savi Office WO200 Manual de usuario
Plantronics
Plantronics EXPLORER Manual de usuario
Plantronics
Plantronics CS60-USB DECT Guía de referencia
Plantronics
Plantronics CT10 Manual de usuario
Plantronics
Plantronics M3000 Manual de usuario
Plantronics
Plantronics Savi W430-M Manual de usuario
Plantronics
Plantronics DISCOVERY 640X - Manual de usuario
Plantronics
Plantronics MS50/T30-1 Manual de usuario
Plantronics
Plantronics DuoPro Manual de usuario
Plantronics
Plantronics Savi W745 Guía de instalación
Plantronics
Plantronics MX150 Manual de usuario
