Planet MGSW SERIES Manual de usuario
L2+ Managed Metro Ethernet Switch
MGSW / MGSD Series
Quick Installation Guide
Table of Contents
1. Package Contents ....................................................................................... 3
2. Requirements ............................................................................................. 4
3. Wiring DC Power Inputs .............................................................................. 5
4. Terminal Setup ........................................................................................... 6
5. Logon to Console........................................................................................ 7
6. ConguringIPAddressviaConsole .............................................................. 8
7. Starting Web Management .........................................................................10
8. SavingCongurationviaWeb .....................................................................13
9.RecoveringBacktoDefaultConguration......................................................14
10. Customer Support.....................................................................................15
3
1. Package Contents
Thank you for purchasing PLANET L2+ Managed Metro Ethernet Switch. The
descriptionofthismodelisshownbelow:
MGSW-28240F L2+ 24-port 100/1000BASE-X SFP with 4-port 10G SFP+ L2/L4
ManagedMetroEthernetSwitch
MGSW-24160F L2+16-port 100/1000BASE-XSFP +8-portGigabit TPManaged
MetroEthernetSwitch
MGSD-10080F L2+ 8-port 100/1000X SFP + 2-port 10/100/1000T Managed
MetroEthernetSwitch
“Managed Metro Switch” is used as an alternative name in this Quick
InstallationGuide.
Open the box of the Managed Metro Switch and carefully unpack it. The box
shouldcontainthefollowingitems:
ModelName
Package Item MGSW-28240F MGSW-24160F MGSD-10080F
TheManagedMetroSwitch
QuickInstallationGuide
RJ45-to-DB9RS232Console
Cable
Rubber Feet
TwoRack-mountingBrackets
withAttachmentScrews
PowerCord
Dust Caps RJ45 Type 5 9 3
SFP Type 28 16 8
If any item is found missing or damaged, please contact your local reseller for
replacement.
4
2. Requirements
zWorkstations running Windows XP/2003/Vista/7/8/2008, MAC OS X or later,
Linux,UNIX,orotherplatformsarecompatiblewithTCP/IPprotocols.
zWorkstationsareinstalledwithEthernetNIC(NetworkInterfaceCard)
zSerialPortConnection(Terminal)
The above Workstations come with COM Port (DB9) or USB-to-RS232
converter.
The above Workstations have been installed with terminal emulator, such as
HyperTerminalincludedinWindowsXP/2003.
Serial cable -- one end is attached to the RS232 serial port, while the other
endtotheconsoleportoftheManagedMetroSwitch.
zEthernetPortConnection
Networkcables--Usestandardnetwork(UTP)cableswithRJ45connectors.
The above PC is installed with Web browser and JAVA runtime environment
plug-in.
Note
It is recommended to use Internet Explore 8.0 or above to access
the Managed Metro Switch. If the Web interface of the Managed
Metro Switch is not accessible, please turn off the anti-virus soft-
wareorfirewallandthentryitagain.
5
3. Wiring DC Power Inputs
The6-contact terminalblock connector onthe rearpanel ofManaged MetroSwitch
is used for two DC redundant power input. Please follow the steps below to insert
the power wires.
1.Insert positive / negative DC power wires into contacts 1 and 2 for DC POWER
1,or5and6forDCPOWER2.
2.Tightenthewire-clampscrewsforpreventingthewiresfromloosening.
1 2 3 4 5 6
DC 1 FaultAlarm DC 2
+-+-
Note
The wire gauge for the terminal block should be in the range
between12and24AWG.
6
4. Terminal Setup
Tocongure the system,connectaserialcable toaCOMporton aPCornotebook
computerandtoRJ45typeofserialportoftheManagedMetroswitch.
Managed Switch
PC / Workstation
with
Terminal Emulation Software
Serial Port
RS232 to RJ45 Cable
Console Port
RJ45
Figure 4-1: Managed Metro Switch Console Connectivity
A terminal program is required to make the software connection to the Managed
Metro Switch.
1. Run terminal program on the OS.
2.When the following screen appears, make sure that the COM port should be
conguredas:
Baud :115200
Databits :8
Parity :None
Stopbits :1
lowcontrol :None
Figure 4-2: COM Port Conguration
7
5. Logon to Console
Oncetheterminalisconnectedtothedevice,powerontheManagedMetroSwitch,
andtheterminalwilldisplay“runningtestingprocedures”.
Then, the following message asks to log-in user name and password. The factory
default user name and password are shown as follows and the login screen in
Figure 5-1 appears.
Username:admin
Password:admin
Figure 5-1: Managed Metro Switch Console Login Screen
The user can now enter commands to manage the Managed Metro Switch. For a
detaileddescriptionofthecommands,pleaserefertothefollowingchapters.
Note
1.For security reason, please change and memorize the new
passwordafterthisfirstsetup.
2.Only accept command in lowercase letter under console inter-
face.
8
6.ConguringIPAddressviaConsole
TheManagedMetroSwitchisshippedwithdefaultIPaddressshownbelow.
IPAddress:192.168.0.100
SubnetMask:255.255.255.0
To check the current IP address or modify a new IP address for the Switch, please
usetheproceduresasfollows:
Show the current IP Address
1.Atthe“#”prompt,enter“show ip interface brief”.
2.ThescreendisplaysthecurrentIPaddressasshowninFigure6-1.
Figure 6-1: IP Information Screen
Conguring IP Address
3.At the “#” prompt, enter the following command and press <Enter> as shown
in Figure 6-2.
MGSW-24160F# congure terminal
MGSW-24160F(cong)#interface vlan 1
MGSW-24160F(cong-if-vlan)#ip address 192.168.1.100 255.255.255.0
9
The previous command would apply the following settings for the Managed Metro
Switch.
IPAddress:192.168.1.100
SubnetMask:255.255.255.0
Figure 6-2: Conguring IP Address Screen
4.Repeatstep1tocheckiftheIPaddressischanged.
Store current switch conguration
5.Atthe“#”prompt,enterthefollowingcommandandpress<Enter>.
# copy running-cong startup-cong
Figure 6-3: Saving Current Conguration Command Screen
If the IP is successfully congured, the Managed Metro Switch will apply the new
IP address setting immediately. You can access the Web interface of the Managed
MetroSwitchthroughthenewIPaddress.
Note
If you are not familiar with the console command or the related
parameter, enter “help” anytime in console to get the help
description.
10
7. Starting Web Management
The following shows how to start up the Web Management of the Managed
Metro Switch. Note the Managed Metro Switch is congured through an Ethernet
connection. Please make sure the manager PC must be set on the same IP
subnet address.
For example, the default IP address of the Managed Metro Switch is
192.168.0.100, then the manager PC should be set at 192.168.0.x (where x
is a number between 1 and 254, except 100), and the default subnet mask is
255.255.255.0.
PC / Workstation
with Web Browser
192.168.0.x
Managed Switch
RJ45/UTP Cable
IP Address:
192.168.0.100
Figure 7-1: IP Management Diagram
Logging in the Managed Metro Switch
1.Use Internet Explorer 8.0 or above Web browser and enter IP address
http://192.168.0.100(thefactorydefaultIPaddressortheonethatyouhave
justchangedinconsole)toaccesstheWebinterface.
2.When the following dialog box appears, please enter the default user name and
password “admin” (or the password you have changed via console). The login
screen in Figure 7-2 appears.
Otros manuales para MGSW SERIES
1
Este manual sirve para los siguientes modelos
1
Tabla de contenidos
Otros manuales de Enrutador de red de Planet
Planet
Planet ADW-4401 A/B Manual de usuario
Planet
Planet ADE-4400 Manual de usuario
Planet
Planet GRT-402 Manual de usuario
Planet
Planet ISW-621 Series Manual de usuario
Planet
Planet XRT-401C Manual de usuario
Planet
Planet VIP-320 Manual de usuario
Planet
Planet FNSW-1600S Manual de usuario
Planet
Planet ADE-4301A Manual de usuario
Planet
Planet XRT-401D Manual de usuario
Planet
Planet FSD-804PS Manual de usuario
Planet
Planet ADN-4101 Manual de usuario
Planet
Planet MGSW-28240F Manual de usuario
Planet
Planet WNRT-625G Manual de usuario
Planet
Planet MAP-2100 Manual de usuario
Planet
Planet WNAP-7335 Manual de usuario
Planet
Planet FGSW-4840S Manual de usuario
Planet
Planet IGS-604HPT-M12 Manual de usuario
Planet
Planet FNSW-2400PS Manual de usuario
Planet
Planet ADSL Firewall Router ADE-4120 Manual de usuario
Planet
Planet XRT-101A Manual de usuario
Manuales populares de Enrutador de red de otras marcas
NETGEAR
NETGEAR FS526T - Switch Manual de usuario
Korenix
Korenix JetNet 5710G Series Manual de usuario
Automated Logic
Automated Logic ZN551 Manual del propietario
Cisco
Cisco ASR 1000 Series Manual del operador
EnGenius
EnGenius ESR-9710 Manual de usuario
Cisco
Cisco 805 Series Instrucciones de funcionamiento y seguridad