Planet IGS-620TF Manual de usuario

Industrial 4-Port 10/100/1000BASE-T

+ 2-Slot 100/1000BASE-X SFP Ethernet Switch

IGS-620TF

User's Manual

Trademarks

Contents are subject to revision without prior notice.

PLANET is a registered trademark of PLANET Technology Corp. All

other trademarks belong to their respective owners.

Disclaimer

PLANET Technology does not warrant that the hardware will work

properly in all environments and applications, and makes no warranty

and representation, either implied or expressed, with respect to

the quality, performance, merchantability, or tness for a particular

purpose.

PLANET has made every effort to ensure that this User’s Manual is

accurate; PLANET disclaims liability for any inaccuracies or omissions

that may have occurred.

Information in this User’s Manual is subject to change without notice

and does not represent a commitment on the part of PLANET. PLANET

assumes no responsibility for any inaccuracies that may be contained in

this User’s Manual. PLANET makes no commitment to update or keep

the current information in this User’s Manual, and reserves the right

to make improvements to this User’s Manual and/or to the products

described in this User’s Manual, at any time without notice.

If you nd information in this manual incorrect, misleading, or

incomplete, we would appreciate your comments and suggestions.

FCC Warning

This equipment has been tested and found to comply with the limits

for a Class A digital device, pursuant to Part 15 of the FCC Rules.

These limits are designed to provide reasonable protection against

harmful interference when the equipment is operated in a commercial

environment. This equipment generates, uses, and can radiate radio

frequency energy and, if not installed and used in accordance with

the Instruction manual, may cause harmful interference to radio

communications. Operation of this equipment in a residential area

is likely to cause harmful interference in which case the user will be

required to correct the interference at his own expense.

CE Mark Warning

This is a Class A product. In a domestic environment, this product may

cause radio interference, in which case the user may be required to

take adequate measures.

WEEE Warning

To avoid the potential effects on the environment and human

health as a result of the presence of hazardous substances

in electrical and electronic equipment, end users of electrical

and electronic equipment should understand the meaning of

the crossed-out wheeled bin symbol. Do not dispose of WEEE as

unsorted municipal waste; they should be collected separately.

Revision

PLANET Industrial 4-port 10/100/1000BASE-T + 2-slot 100/1000BASE-X

SFP Ethernet Switch User's Manual

For Model: IGS-620TF

Revision: 1.1 (April, 2015)

Part No: EM-IGS_620TF_v1.1 (2350-AH0580-001)

Table of Contents

1. Introduction.............................................................................. 5

1.1 Package Contents ............................................................... 5

1.2 How to Use This Manual...................................................... 5

1.3 Product Features................................................................. 6

1.4 Product Specications ......................................................... 7

1.5 Physical Dimensions ............................................................ 9

2. Installation ..............................................................................10

2.1 Product Description ............................................................10

2.1.1 Switch Front Panel...................................................12

2.1.2 LED Indicators ........................................................13

2.1.3 Switch Upper Panel..................................................14

2.1.4 Wiring the Power Inputs...........................................15

2.1.5 Wiring the Fault Alarm Contact .................................16

2.1.6 Cabling...................................................................16

2.1.7 Redundancy Overview..............................................23

2.2 Mounting Installation..........................................................24

2.2.1 Installing DIN-rail Mounting......................................24

2.2.2 Wallmount Plate Mounting ........................................26

3. Applications .............................................................................27

4. Switch Operation......................................................................30

4.1 Address Table ....................................................................30

4.2 Learning ...........................................................................30

4.3 Forwarding & Filtering ........................................................30

4.4 Store-and-Forward .............................................................30

4.5 Auto-Negotiation................................................................31

5. Troubleshooting ........................................................................32

6. Cable Connection Parameters ....................................................33

APPENDIX A: Networking Connection...............................................34

A.1 Switch’s RJ45 Pin Assignments ............................................34

A.2 RJ45 Cable Pin Assignments................................................35

1. Introduction

1.1 Package Contents

Check the contents of your package for the following parts:

zIndustrial Gigabit Ethernet Switch x 1

zUser's Manual x 1

zDIN Rail Kit x 1

zWall Mount Kit x 1

If any of these are missing or damaged, please contact your dealer

immediately; if possible, retain the carton including the original packing

material, and use them again to repack the product in case there is a

need to return it to us for repair.

The term “Industrial Gigabit Ethernet Switch” mentioned in this

user’s manual also means the IGS-620TF.

1.2 How to Use This Manual

This Industrial Gigabit Ethernet Switch User Manual is

structured as follows:

Chapter 2 Installation

The chapter explains the feature, functionality and the physical

installation of the Industrial Gigabit Ethernet Switch.

Chapter 3 Application

The chapter explains the Industrial Gigabit Ethernet Switch application.

Chapter 4 Switch Operation

The chapter explains the Industrial Gigabit Ethernet Switch transmit

operation.

Chapter 5 Troubleshooting

The chapter explains the troubleshooting of the Industrial Gigabit

Ethernet Switch.

Chapter 6 Cable Connection Parameters

The chapter contains the cable connection parameters of the Industrial

Gigabit Ethernet Switch.

Appendix A

This chapter contains cable information of the Industrial Gigabit

Ethernet Switch.

1.3 Product Features

Physical Port

4-Port 10/100/1000BASE-T RJ45 with auto MDI / MDI-X function

2 SFP interfaces, 100/1000BASE-X dual mode (DIP switch control)

Layer 2 Features

IEEE 802.3 / 802.3u / 802.3ab / 802.3z Ethernet Standard

Compliant

Supports Auto-negotiation and 10/100Mbps half / full duplex and

1000Mbps full duplex mode

 High performance Store and Forward architecture, runt/CRC ltering

eliminates erroneous packets to optimize the network bandwidth

Prevents packet loss with back pressure (half-duplex) and IEEE

802.3x PAUSE frame ow control (full-duplex)

9K Jumbo Frame Size support

Backplane (Switching Fabric): 12Gbps

Integrated address look-up engine, support 1K absolute MAC

addresses

Automatic address learning and address aging

CSMA/CD Protocol

Industrial Case / Installation

Slim IP30 metal case / protection

DIN rail and wall mount design

Redundant Power Design

- 12 to 48V DC, redundant power with polarity reverse protect function

- AC 24V power adapter acceptable

Supports EFT protection for 6000 VDC for power line

Supports 6000 VDC Ethernet ESD protection

-40 to 75 degrees C operating temperature

Fiber Port Redundancy

Link status auto-detect and redundant on dual ports with the same

connector type

Only when primary port is active, the backup port is blocked.

 When primary port link fails, the trafc will swap to backup port

automatically.

 Once the primary port status is back to link up, the trafc swaps

from backup port to primary port.

1.4 ProductSpecications

Model IGS-620TF

Hardware Specications

10/100/1000BASE-T

Ports 4

SFP Interfaces

2 1000BASE-SX/LX/BX SFP interfaces

(Port-5 and Port-6)

Compatible with 100BASE-FX SFP

Dimensions

(W x D x H) 135 x 87 x 32mm

Weight 503g

Power Requirements

DC 12~48V, Redundant power with polarity

reverses protection function. AC 24V Power

Adapter

Power Consumption

/ Dissipation 7.2 watts/24BTU

Installation DIN rail kit and wall mount ear

Switch Specications

Switch Processing

Scheme Store-and-Forward

MAC Address Table 1K entries

Flow Control Back pressure for half duplex

IEEE 802.3x pause frame for full duplex

Switch Fabric 12Gbps

Throughput

(packet per second) 8.9Mpps

Maximum

Transmission Unit 9216bytes

Network Cables

10/100/1000BASE-T :

Cat. 3, 4, 5, 5e, 6 UTP cable (100meters, max.)

EIA/TIA-568 100-ohm STP (100meters, max.)

1000BASE-SX :

50/125μm or 62.5/125μm multi-mode ber

optic cable, up to 550m/2km (vary on SFP

module)

1000BASE-LX :

9/125μm single-mode ber optic cable, up to

10/20/30/40/50/70/120 kilometers (vary on

SFP module)

100BASE-FX :

50/125μm or 62.5/125μm multi-mode ber

optic cable, up to 2 kilometers (vary on SFP

module)

9/125μm single-mode ber optic cable, up to

20/40/60/120 kilometers (vary on SFP module)

Standards Conformance

Standards

Compliance

IEEE 802.3 Ethernet

IEEE 802.3u Fast Ethernet

IEEE 802.3ab Gigabit Ethernet

IEEE 802.3z Gigabit Ethernet

IEEE 802.3x Full-Duplex Flow Control

Regulation

Compliance FCC Part 15 Class A, CE

Stability Testing

IEC60068-2-32 (free fall)

IEC60068-2-27 (shock)

IEC60068-2-6 (vibration)

Environment

Temperature Operating: -40~75 degrees C

Storage: -40~75 degrees C

Humidity Operating: 5~95% (non-condensing)

Storage: 5~95% (non-condensing)

1.5 Physical Dimensions

IGS-620TF Industrial Gigabit Ethernet Switch dimensions (W x D x H):

135 x 87 x 32mm

Side View

Bottom View

Front View

Mounting Kit

DIN-Rail Kit

Top View Rear View

LNK/

ACT

SFP

1000X

P1 P2 FAULT

IGS-620TF

1000 LNK/ACT

100 LNK/ACT

LNK/

ACT

SFP

Input DC 12~48V, AC 24V

V1-

V1+

V2-

V2+

PWR1

Port 5

Port 6

Mode

Fault

PWR2

100FX

Redundant

1000X

ON OFF

1000X

Switch

Port 5

Port 6

Fiber Mode

1 2 3

1 2 3 4 5 6

2. Installation

This section describes the functionalities of the Industrial Gigabit

Ethernet Switch’s components and guides how to install it on the

desktop. Basic knowledge of networking is assumed. Please read this

chapter completely before continuing.

2.1 Product Description

Flexibility and Network Distance Extension Solution

The IGS-620TF Industrial Gigabit Ethernet Switch is equipped with

four 10/100/1000BASE-T auto-negotiation ports and two 100/1000X

SFP slots. The two SFP slots are compatible with 1000BASE-SX / LX

or 100BASE-FX through SFP (Small Form Factor Pluggable) ber-optic

transceiver; the two SFP slots allow changing the operation speed

mode with its built-in DIP switch. The ber optical uplink capability

guarantees the throughput to all nodes hooked into the network and

the Gigabit Ethernet distance can be extended from 550m/2km (Multi-

Mode ber cable) up to 10/20/30/40/50/70/120 kilometers (Single-

Mode ber cable). The Fast Ethernet distance can also be extended

from 2km (Multi-Mode ber cable) up to 20/40/60/120 kilometers

(Single-Mode ber cable). They are well suited for applications within

the factory data centers and distributions.

Adjustable 6-Port Switch Mode or 4 + 2 Fiber Redundant Mode

Via the built-in DIP switch, the IGS-620TF can be congured as 6-Port

Ethernet switch or 4+2 ber redundant mode. With the 6-Port switch

mode, the IGS-620TF can operate in Store-and-Forward mechanism

with high performance; on the other hand, when in the 4+2 ber

redundant mode, it provides rapid ber redundancy of link for highly

critical Ethernet applications. The redundant mode also supports auto-

recovering function. If the destination port of a packet is link down, it

will forward the packet to the other port of the backup pair.

Environmentally Hardened Design

With IP30 metal industrial case protection, the IGS-620TF provides a

high level of immunity against electromagnetic interference and heavy

electrical surges which are usually found on plant oors or in curb side

Tabla de contenidos

Otros manuales de Enrutador de red de Planet

Planet

Planet ERT-805 Manual de usuario

Planet

Planet FSD-401ST Manual de usuario

Planet

Planet GSW-1600S Manual de usuario

Planet

Planet FGSD-1022 Manual de usuario

Planet

Planet FGSW-2624SF Series Manual de usuario

Planet

Planet FGSW-1820RS Manual de usuario

Planet

Planet XRT-811 Manual de usuario

Planet

Planet SW-504 Manual de usuario

Planet

Planet XRT-101A Manual de usuario

Planet

Planet SW-501 Manual de usuario

Planet

Planet G.SHDSL.bis Bridge Router GRT-504 Manual de usuario

Planet

Planet ADE-4100 Manual de usuario

Planet

Planet VC-234G Manual de usuario

Planet

Planet IGS-6325 DIN rail Series Manual de usuario

Planet

Planet ADE-3400v4 Manual de usuario

Planet

Planet VDR-301n Manual de usuario

Planet

Planet ISW-621 Series Manual de usuario

Planet

Planet GSW-1602SF Manual de usuario

Planet

Planet gsd-1002vhp Manual de usuario

Planet

Planet GSW-2400HPS Manual de usuario

Planet

Planet EPN-102 Manual de usuario

Planet

Planet IRT-1001ST Manual de usuario

Planet

Planet GRT-402 Manual de usuario

Planet

Planet SW-804 Manual de usuario

Manuales populares de Enrutador de red de otras marcas

Allnet

Allnet ALL0333AU Manual de usuario

HomeSeer

HomeSeer HT-SEL Manual de usuario

Sercomm

Sercomm Genesis OC3505D Manual de usuario

Billion

Billion BIPAC 5102 Series Manual de usuario

TP-Link

TP-Link TD-8817 Manual de usuario

Motorola

Motorola MR1900 Manual de usuario

Digi

Digi IX14 Manual de usuario

Cisco

Cisco NCS 540 Manual

XAVi

XAVi X8821e Manual de usuario

BEC

BEC 6200WZL Manual de usuario

MikroTik

MikroTik hAP ac3 Series Manual de usuario

Korenix

Korenix JetNet 5428G Series Manual de usuario

NETGEAR

NETGEAR FS526T - Switch Manual de usuario

Korenix

Korenix JetNet 5710G Series Manual de usuario

Automated Logic

Automated Logic ZN551 Manual del propietario

Cisco

Cisco ASR 1000 Series Manual del operador

EnGenius

EnGenius ESR-9710 Manual de usuario

Cisco

Cisco 805 Series Instrucciones de funcionamiento y seguridad