Piusi DELPHIN PRO X Manual de usuario
Bulletin M0495A EN _ 00
Delphin
PRO_X
quick guide
RESET
on/off STAT US
MADE IN ITALY
RESET
Preset
Not for resale
Flow-Rate
REFILL
3sec
POWER
0,1110
ENTER
AUTO
FLOW
max
min
DELPHIN PRO X
Delphin PRO_X _ quick guide EN
M0495A
2 /20
quick guide to use
Bulletin M0495A
ENGLISH
INDEX
1 KNOW THE MANAGEMENT SYSTEM 3
1.1 THE KEYBOARD 3
1.2 DISPLAY 4
1.3 LEGENDS 4
2 USE 5
2.1 SETTING THE PRESET FUNCTIONS 5
2.2 MANUAL DISPENSING 6
2.3 DISPENSING WITH AUTOMATIC FLOW 8
2.4 SHUTDOWN OF THE SYSTEM 9
3 SYSTEM COMMUNICATIONS 10
3.1 REGULAR OPERATION 10
3.2 BATTERY INDICATIONS FOR DC VERSIONS 11
3.3 ALARM SIGNALS THAT DO NOT BLOCK THE SYSTEM 12
3.4 ALARM SIGNALS THAT BLOCK THE SYSTEM 12
4 CUSTOMIZE THE SYSTEM 13
3/124
3 /20
EN
This manual is the property of PIUSI S.p.A. Any reproduction, even partial, is forbidden.
delphin PRO_X QUICK GUIDE
translated from italian
1 KNOW THE MANAGEMENT SYSTEM
1.1 THE KEYBOARD
Dispensing management system with Delphin PRO_X.
The SYSTEM also allows the user to PRESELECT the quantity to be sup-
plied and automatically stops dispensing when the preset amount has
been reached.
The interface of the management system is represented by the plate / key-
pad which includes the function keys, the LCD screen and the communica-
tion LEDS
RESET
on/off STAT U S
MADE IN ITALY
RESET
Preset
Not for resale
Flow-Rate
REFILL
3sec
POWER
0,1110
ENTER
AUTO
FLOW
max
min
DELPHIN PRO X
1 2
5
6
7
89
4
3
1
POWER buon: used to power the system.
2
REFILL buon: press for at least 3 seconds to start dispensing
3
ON/OFF LED
4
STATUS LED
5
LCD Display
6
LED alarm messages
7
LEDS baery status indicators (GREEN / YELLOW / RED)
8
Function and pre-selection keys
9
Variator / flow seing
M0495A
4 /20
quick guide to use
1.2 DISPLAY
The liquid-crystal
display “LCD”
The SYSTEM uses an LCD with the following numeric registers and indica-
tions:
1. Batch total (4 digits, floating point)
2. Totals (7 digits).
3. Indication of the Total type (TOTAL / Resettable TOTAL).
4.
Indication of the Unit of Measurement: LIT = Liters
GAL = Gallons
QTS = Quarts
5. Indication of operation in AUTO mode.
1.3 LEGENDS
FUNCTION KEYS
Numeric keys
to be used to set the PRESET value (automatic dispense stop value).
ENTER key
to be used to select and confirm the PRESET value.
RESET key
to be used to reset the Batch Total and to display the Resettable TOTAL.
LEDS COMMUNICATION
Representation
pulses
Description
LED always on
Flashing: 1 IMPULSE TO REGULAR INTERVALS
Flashing: 2 IMPULSES TO REGULAR INTERVALS
Flashing: 3 IMPULSES TO REGULAR INTERVALS
5/124
5 /20
EN
This manual is the property of PIUSI S.p.A. Any reproduction, even partial, is forbidden.
delphin PRO_X QUICK GUIDE
translated from italian
2 USE
ATTENTION The METER has been designed for professional use and must be utilized by
adult personnel properly trained for the intended purpose.
2.1 SETTING THE PRESET FUNCTIONS
The SYSTEM allows to select the value (expressed in Liters or Gallons) to
which automatically stop the delivery: “PRESET value”. You can set the
preset value in more ways:
1 - Direct
seing of a
new PRESET
value
The
SYSTEM
allows the user to directly set the PRESET value by means of the
numeric keys.
If THE SYSTEM is turned off, TURN ON BY PRESSING THE “POWER” BUTTON.
The DISPLAY will display:
Non-reseable
To t a l
To select a new PRESET value (for example 12.3) use the numeric keys.
The DISPLAY will display:
Selected value
To confirm the PRESET value, press and keep pressed the AUTO key until the
DISPLAY displays:
Reseable Batch total
Selected value
Dispensing
Proceed with the dispensing as described in the following paragraphs. The preset
functions do not vary whether you choose a manual or automatic dispensing.
M0495A
6 /20
quick guide to use
2.2 MANUAL DISPENSING
RESET
on/off STAT U S
MADE IN ITALY
RESET
Preset
Not for resale
Flow-Rate
REFILL
3sec
POWER
0,1110
ENTER
AUTO
FLOW
max
min
DELPHIN PRO X
If the system is off, press the power buon to turn
on.
The SYSTEM can be used manually if you do not want to set an automatic
stop value. In this case, proceed as follows:
The DISPLAY displays:
Last amount
dispensed
Non-reseable
To t a l
The SYSTEM can be programmed to display the last amount dispensed
until the RESET button is pressed or to automatically reset the Batch Total
a few minutes after a dispensing operation in MANUAL mode
Resetting
the Batch
To t a l
To reset the batch total, press RESET. The DISPLAY will display:
Reseable Batch total
Reseable General Total
Resetting
the Total
To reset the resettable Total, press and keep pressed the RESET key.
The DISPLAY will display:
Reset General Total
7/124
7 /20
EN
This manual is the property of PIUSI S.p.A. Any reproduction, even partial, is forbidden.
delphin PRO_X QUICK GUIDE
translated from italian
Dispensing Proceed with the dispensing as described.
1
Insert the connector to your tank and screw it in;
2
Select the desired flow rate using the knob (area included “min” and “max”):
RESET
on/off STAT U S
MADE IN ITALY
RESET
Preset
Not for resale
Flow-Rate
REFILL
3sec
POWER
0,1110
ENTER
AUTO
FLOW
max
min
DELPHIN PRO X
RESET
on/off STAT U S
MADE IN ITALY
RESET
Preset
Not for resale
Flow-Rate
REFILL
3sec
POWER
0,1110
ENTER
AUTO
FLOW
max
min
DELPHIN PRO X
3
Press the REFILL button for 3 seconds, a top LED flashes and dispensing
starts.
RESET
on/off STAT US
MADE IN ITALY
RESET
Preset
Not for resale
Flow-Rate
REFILL
3sec
POWER
0,1110
ENTER
AUTO
FLOW
max
min
DELPHIN PRO X
RESET
on/off STAT U S
MADE IN ITALY
RESET
Preset
Not for resale
Flow-Rate
REFILL
3sec
POWER
0,1110
ENTER
AUTO
FLOW
max
min
DELPHIN PRO X
During dispensing, the up-
per LEDs will flash alter-
nately
RESET
on/off STAT U S
MADE IN ITALY
RESET
Preset
Not for resale
Flow-Rate
REFILL
3sec
POWER
0,1110
ENTER
AUTO
FLOW
max
min
DELPHIN PRO X
RESET
on/off STAT U S
MADE IN ITALY
RESET
Preset
Not for resale
Flow-Rate
REFILL
3sec
POWER
0,1110
ENTER
AUTO
FLOW
max
min
DELPHIN PRO X
4
Finished dispensing
LED ON/OFF remains on fixed while flashing the total displayed displayed
NOTE
THIS COMMUNICATION IS SAME FOR ANY KIND OF ARREST OF THE
DISPENSING.
RESET
on/off STAT U S
MADE IN ITALY
RESET
Preset
Not for resale
Flow-Rate
REFILL
3sec
POWER
0,1110
ENTER
AUTO
FLOW
max
min
DELPHIN PRO X
+
5
Once dispensed, unscrew the connector and place it in the appropriate
support.
NOTE
Once the delivery has been completed, the system automatically prepares
a new dispensing.
M0495A
8 /20
quick guide to use
2.3 DISPENSINGWITHAUTOMATICFLOW
The system performs the supply by looking for the flow that is most suit-
able for the type of tank up to filling or when the pre-selected quantity is
reached.
Dispensing Proceed to the dispensing as described.
1
Insert the connector to your tank and screw it in;
2
Use the knob to select the delivery flow in «AUTO FLOW» position
RESET
on/off STAT U S
MADE IN ITALY
RESET
Preset
Not for resale
Flow-Rate
REFILL
3sec
POWER
0,1110
ENTER
AUTO
FLOW
max
min
DELPHIN PRO X
RESET
on/off STAT U S
MADE IN ITALY
RESET
Preset
Not for resale
Flow-Rate
REFILL
3sec
POWER
0,1110
ENTER
AUTO
FLOW
max
min
DELPHIN PRO X
3
Set the quantity in direct or pre-set mode as described;
4
Press the REFILL button for 3 seconds, a top LED flashes and dispensing
starts.
RESET
on/off STAT US
MADE IN ITALY
RESET
Preset
Not for resale
Flow-Rate
REFILL
3sec
POWER
0,1110
ENTER
AUTO
FLOW
max
min
DELPHIN PRO X
RESET
on/off STAT U S
MADE IN ITALY
RESET
Preset
Not for resale
Flow-Rate
REFILL
3sec
POWER
0,1110
ENTER
AUTO
FLOW
max
min
DELPHIN PRO X
During dispensing, the
upper LEDs will flash al-
ternately
RESET
on/off STAT U S
MADE IN ITALY
RESET
Preset
Not for resale
Flow-Rate
REFILL
3sec
POWER
0,1110
ENTER
AUTO
FLOW
max
min
DELPHIN PRO X
RESET
on/off STAT U S
MADE IN ITALY
RESET
Preset
Not for resale
Flow-Rate
REFILL
3sec
POWER
0,1110
ENTER
AUTO
FLOW
max
min
DELPHIN PRO X
5
Terminated dispensing:
Led ON / OFF remains on fixed while flashing the total displayed on dis-
play
NOTE
THIS COMMUNICATION IS THE SAME TIME IN FRONT OF ANY KIND OF
ARREST OF DISPENSING.
9/124
9 /20
EN
This manual is the property of PIUSI S.p.A. Any reproduction, even partial, is forbidden.
delphin PRO_X QUICK GUIDE
translated from italian
RESET
on/off STAT U S
MADE IN ITALY
RESET
Preset
Not for resale
Flow-Rate
REFILL
3sec
POWER
0,1110
ENTER
AUTO
FLOW
max
min
DELPHIN PRO X
+
6
Once dispensed, unscrew the connector and place it in the appropriate
support.
ATTENTION
If dispensing starts in AUTOMATIC mode it will not be possible, during dis-
pensing, to switch to manual mode.
NOTE
Once the delivery has been completed, THE SYSTEM AUTOMATICALLY
PREPARES A NEW DISPENSING.
2.4 SHUTDOWN OF THE SYSTEM
ATTENTION
The dc models are equipped with a baery saving system that automatically
turns off the system aer 10 minutes of unusing.
The system turns off completely if not used for at least 10 minutes, but
keeps the power switch inserted.
rESTART
To turn the system back on, follow the steps below:
1
Press the «power» switch to turn it off
2
Press the power switch again to turn the system back on
M0495A
10 /20
quick guide to use
3 SYSTEM COMMUNICATIONS
3.1 REGULAR OPERATION
RESET
on/off STAT U S
MADE IN ITALY
RESET
Preset
Not for resale
Flow-Rate
REFILL
3sec
POWER
0,1110
ENTER
AUTO
FLOW
max
min
DELPHIN PRO X
1 - STAND-BY -
[green «ON / OFF» LED lit steady]
the system is ready for a new dispens-
ing
RESET
on/off STAT U S
MADE IN ITALY
RESET
Preset
Not for resale
Flow-Rate
REFILL
3sec
POWER
0,1110
ENTER
AUTO
FLOW
max
min
DELPHIN PRO X
RESET
on/off STAT U S
MADE IN ITALY
RESET
Preset
Not for resale
Flow-Rate
REFILL
3sec
POWER
0,1110
ENTER
AUTO
FLOW
max
min
DELPHIN PRO X
2 - DISPENSING IN PROGRESS
[green LEDs “ON / OFF” and “STATUS”
flash alternately]
The system is dispensing
RESET
on/off STAT U S
MADE IN ITALY
RESET
Preset
Not for resale
Flow-Rate
REFILL
3sec
POWER
0,1110
ENTER
AUTO
FLOW
max
min
DELPHIN PRO X
++
3 - FULL TANK FOR REACHING THE LEVEL
[LED “ON / OFF REMAINS ON FIXED
WHILE FLASHING THE TOTAL SUP-
PLIED DISPLAYED ON THE DISPLAY]
The system has dispensed until reach-
ing the maximum tank level.
4 - IN PRESET MODE:
PRE-SET QUANTITY REACHED
[LED “ON / OFF REMAINS ON FIXED
WHILE FLASHING THE TOTAL SUP-
PLIED DISPLAYED ON THE DISPLAY]
The system has dispensed until the pre-
selected quantity of liquid is reached.
Tabla de contenidos
Otros manuales de Instrumento de medición de Piusi
Piusi
Piusi MK325 Manual de servicio
Piusi
Piusi OCIO Manual del operador
Piusi
Piusi K900 Manual
Piusi
Piusi K33 Atex Manual de usuario
Piusi
Piusi K33 Atex Manual de usuario
Piusi
Piusi K900 Manual de instrucciones
Piusi
Piusi K40 Manual de usuario
Piusi
Piusi SUZZARA BLUE DEF METER Manual de usuario
Piusi
Piusi K24 Manual de usuario
Piusi
Piusi K24 Manual de uso y cuidado
Manuales populares de Instrumento de medición de otras marcas
Endress+Hauser
Endress+Hauser Proline Promag 50 Especificaciones técnicas
Siemens
Siemens SITRANS F Coriolis FCT030 Manual de lista de piezas
KLINGER
KLINGER CMF V Series Manual de usuario
EXFO
EXFO FTB-2 Manual de operación y mantenimiento
Keysight
Keysight M8290A Manual de usuario
ADTEK
ADTEK MW-5 Manual de usuario