Pitney Bowes MT30 Series Manual de usuario
Installation Guide
SDC2155B
9 September 2022
Shipping & Mailing
Postage Meters
MT30/49/70 Series Scales
Installation Instructions for DM™ Series
Introduction
Your new weighing platform needs to be connected, levelled and installed properly to ensure
accuracy.
Before you begin attaching or replacing your scale
lCheck the box for damage. Notify the carrier of any shipping damage.
lRemove the contents from the box.
lPlace the scale on a sturdy, level table.
1. Connect the USB cable to the Weighing Platform
Plug the square end of the enclosed USB cable into the connector on the bottom of your weighing
platform as shown.
Pitney Bowes Installation Guide September 2022 2
2. Level the Weighing Platform
Model MT30
lRemove the top cover of the weighing platform.
lLift the corner(s) and adjust the leg(s) by turning them until the bubble is in the centre of the
circle as shown.
lReplace the top cover.
Pitney Bowes Installation Guide September 2022 3
Model MT49, 70
lRemove the Weighing Platform's top cover.
lLift the corner(s) and adjust the leg(s) by turning them until the bubble is in the centre of the
circle as shown.
lReplace the top cover.
Pitney Bowes Installation Guide September 2022 4
3. Connect the USB cable to the Meter
DM100 - DM220i
Insert the USB cable into one of the rectangular USB ports on the back of your meter.
DM300c/DM300M - DM475
Insert the USB cable into one of the rectangular USB ports on the back of your meter.
Note: If no USB ports are available in the meter you may need to use a USB hub. Attach the
Weighing Platform to the hub.
Pitney Bowes Installation Guide September 2022 5
4. Turn your system on
Note: For first time scale installation, you will need to enter a Location Code (see below). If this is
a scale replacement, proceed to page 7.
Refer to the map to find the correct Location Code for your scale. Follow the prompts on your
meter's display to enter the correct location code.
Pitney Bowes Installation Guide September 2022 6
5. Test the scale
Note: If using the MTSeries scale this will disable the integrated scale of top of your machine. If
you would like to revert back to using the integrated scale, remove the USB lead from the back of
your meter.
lPlace a piece of mail on the scale.
lPress the Class key, then select the desired class and fee.
lCheck the screen for the correct postage amount.
Pitney Bowes Installation Guide September 2022 7
PB Form SDC2155-gb Rev.B
© Pitney Bowes Limited, 2022
We have made every reasonable effort to
assure the accuracy and usefulness of this
guide, however we cannot assume
responsibility for errors or omissions or liability
for the misuse or misapplication of our
products.
3001 Summer Street
Stamford, Connecticut 06926
www.pitneybowes.com
Este manual sirve para los siguientes modelos
2
Otros manuales de Escala de Pitney Bowes
Pitney Bowes
Pitney Bowes 9K0U Manual
Pitney Bowes
Pitney Bowes INTEGRA N500 Manual de usuario
Pitney Bowes
Pitney Bowes SendKit SL-397-D Manual de usuario
Pitney Bowes
Pitney Bowes G790 Manual de usuario
Pitney Bowes
Pitney Bowes G799 Manual de usuario
Pitney Bowes
Pitney Bowes G795 Manual de usuario
Pitney Bowes
Pitney Bowes SV60584 Guía de referencia
Pitney Bowes
Pitney Bowes 397-C Manual de usuario
Pitney Bowes
Pitney Bowes Integra N400 Manual de usuario
Pitney Bowes
Pitney Bowes Integra N300 Manual de usuario
