Pit Boss Navigator PB850G Manual de usuario

MODEL / MODÈLE / MODELO: PB850G

PART / PIÈCE / PARTE: 10527, 10547

300522

    

IMPORTANT, READ CAREFULLY, RETAIN FOR FUTURE

REFERENCE. MANUAL MUST BE READ BEFORE OPERATING!

      

IMPORTANT, PRENEZ CONNAISSANCE DE CE DOCUMENT ET

CONSERVEZ-LE POUR RÉFÉRENCE ULTÉRIEURE. VOUS DEVEZ

LIRE CE GUIDE AVANT D’UTILISER LE BARBECUE!

      

IMPORTANTE, LEER DETENIDAMENTE, CONSERVAR PARA

REFERENCIA FUTURA. LEA EL MANUAL ANTES DEL USO!

For outdoor nd household use onl Not for commercl use

Réservéà l'use extéreur et résdentel unquement Non destnéà un use commercl

Solo pr uso doméstco  en el exteror No pto pr uso comercl

WARNING Plese red the entre mnul

before nstllton nd use of ths electrc,

pellet fuel-burnn pplnce Flure to

follow these nstructons could result n

propert dme, bodl nur or even

deth Contct locl buldn or fre offcls

bout restrctons nd nstllton nspecton

requrements n our re

AVERTISSEMENT  Veullez lre l’ntérlté du

mnuel vnt l’nstllton et l’utlston de cet

pprel électrque  combuston de rnulés

de bos Le non-respect de ces nstructons

peut entrîner des dommes mtérels,

des dommes corporels ou même l mort

Contctez les utortés locles compétentes

concernnt les restrctons et les exences

d'nspecton en vueur dns votre réon

ADVERTENCIA Le todo el mnul ntes

de nstlr  usr est undd que funcon

con electrcdd  combustón de pellets

S no se suen ests nstruccones, pueden

producrse dños mterles, lesones

corporles o ncluso l muerte Pr consultr

ls restrccones  requstos de nspeccón

de ls nstlcones de su zon, pónse en

contcto con los encrdos de edfco o el

Deprtmento de Bomberos

 

 '

  

ENGLISH

Parts & Specs...................................................................... 3

Assembly Preparation...................................................... 5

Assembly Instructions

Securing Feet To Support Legs..................................................5

Securing Support Plates and Caster Wheels..........................5

Securing Support Plates and Wheels.......................................6

Securing Support Plate To Support Legs For Wheels...........6

Securing Support Plate To Support Legs For Casters...........6

Mounting Main Barrel To The Cart........................................... 7

Securing Support Plates To The Grill........................................ 7

Installing The Lid Stopper .......................................................... 7

Installing The Lid Handle............................................................ 7

Installing The Flame Broiler Components...............................8

Installing Flame Broiler Adjusting Bar.....................................8

Installing The Side Shelf .............................................................8

Securing The Front Shelf Brackets............................................9

Installing The Front Shelf...........................................................9

Installing The Grill Cooking Components ...............................9

Installing Grease Bucket .......................................................... 10

Connecting To A Power Source................................................ 10

  

copied, transmitted, transcribed, stored in a retrieval system, in any

form or by any means without expressed written permission of,

Dansons

3411 North 5th Avenue, Suite 500, Phoenix, ,  85013

sales@pitboss-grills.com | service@pitboss-grills.com

www.pitboss-grills.com

Customer Service

Monday through Sunday, 4am - 8pm PST (EN/FR/ES)

Toll-Free: 1-877-303-3134, Fax: 1-877-303-3135

ENGLISH

  

Part# Description

1 Lid Stopper (x1)

2 Lid Handle (x1)

3 Lid Handle Bezel (x2)

4 Main Barrel/Hopper Assembly (x1)

5 Flame Broiler Adjusting Bar (x1)

6 Flame Broiler Adjusting Bar Handle (x1)

7 Flame Broiler Slider (x1)

8 Flame Broiler Main Plate (x1)

9 Left Front Leg (x1)

10 Left Back Leg (x1)

11 Right Front Leg (x1)

12 Right Back Leg (x1)

13 Left Front Leg Trim Piece (x1)

14 Left Back Leg Trim Piece (x1)

15 Swivel Caster with Brake (x2)

16 Wheel (x2)

17 Right Bottom Support Plate (x1)

18 Left Bottom Support Plate (x1)

19 Short Support Plate (x2)

20 Front Long Support Plate (x1)

21 Back Long Support Plate (x1)

22 Front Shelf (x1)

23 Front Shelf Bracket Right (x1)

24 Front Shelf Bracket Left (x1)

25 Grease Bucket (x1)

26 Right Side Table (x1)

27 Cooking Grid A (x1)

28 Cooking Grid B (x2)

29 Warming Rack (x1)

30 Meat Probe (x1)

Part# Description

A Screw (x18)

B Washer (x18)

C Locking Washer (x18)

D Screw (x30)

E Screw (x4)

F Wheel Axle Pin (x2)

G Wheel Cotter Pin (x2)

H Wheel Washer (x2)

NOTE: Due to ongoing product development, parts are subject to change without notice. Contact

Customer Service if parts are missing when assembling the unit.

   

110120, 60, 250, 3  

Diagram Illustration on next page.

MODEL UNIT ASSEMBLED (WxHxD) UNIT WEIGHT COOKING AREA TEMP. RANGE DIGITAL FEATURES



850

1,472mm x 1,195mm x 940mm

/ 57.9” x 47” x 37”

74.5 kg /

164.24 lb

Main

- 3,825.8 cm / 593 sq. in.

Upper Rack

- 1,845.2 cm / 286 sq. in.

TOTAL

- 5,671 cm / 879 sq. in.

82-260°C

/ 180-500°F

Ten temperature

presets, start-up and

cool-down cycles,

electric igniter

ENGLISH

  





 









24 25

910

ENGLISH

 

IMPORTANT: It is advised to read each step entirely before starting assembly on instructions. Do not tighten screws

completely until all screws for that step have been installed. Hardware combination involving a locking washer and

washer should be installed with the locking washer closest to the head of the screw.

1.     

Parts Required:

1 x Left Front Leg

(#9)

1 x Left Back Leg

(#10)

1 x Left Front Leg Trim Piece

(#13)

1 x Left Back Leg Trim Piece

(#14)

6 x Screw

(#D)

Installation:

• Use three screws to attach the Left Front Leg Trim Piece to the Left Front

Leg for locking caster wheel. Continue to install the Left Back Leg for locking

caster wheel and Left Back Leg Trim Piece.

2.      

Parts Required:

1 x Left Front Leg

(#9)

1 x Left Back Leg

(#10)

1 x Left Bottom Support Plate

(#18)

1 x Short Support Plate

(#19)

2 x Swivel Caster with Brake

(#15)

8 x Screw

(#D)

Installation:

• Install one Short Support Plate to the side of the unit between of a Front and

Back Support Legs using four screws. Repeat the same installation to mount

the Bottom Support Plate to the same legs.

• Insert each Locking Caster Wheel into the Bottom of each Support Leg by

hand-tightening into the hole. Ensure the Locking Caster Wheel is inserted

completely by ensuring it cannot rotate any further.

NOTE: Make sure Bottom Support Plate is facing up with correct direction.

 

Parts are located throughout the shipping carton, including underneath the grill. Inspect the grill, parts, and hardware blister

pack after removing from the protective shipping carton. Discard all packaging materials from inside and outside of the grill

before assembly, then review and inspect all parts by referencing the parts list. If any part is missing or damaged, do not attempt

to assemble. Shipping damage is not covered under warranty. Contact your dealer or Pit Boss®Customer Service for parts: Monday

through Sunday, 4am - 8pm PST (EN/FR/ES).

service@pitboss-grills.com | Toll-Free: 1-877-303-3134 | Toll-Free Fax: 1-877-303-3135

IMPORTANT: To ease installation and avoid injury, use two people when assembling this appliance.

Tools required for assembly: screwdriver and level.

Tools not included.

ENGLISH

3.     

Parts Required:

1 x Right Front Leg

(#11)

1 x Right Back Leg

(#12)

1 x Right Bottom Support Plate

(#17)

1 x Short Support Plate

(#19)

2 x Wheel

(#16)

8 x Screw

(#D)

2 x Wheel Axle Pin

(#F)

2 x Wheel Cotter Pin

(#G)

2 x Wheel Washer

(#H)

Installation:

• Install one Short Support Plate to the side of the unit between of a Front

and Back Support Legs using four screws. Repeat the same installation

to mount the Bottom Support Plate to the same legs.

• Attach the large Wheel to the Support Leg by inserting the Wheel Axle

Pin through the Wheel Support Leg hole, then secure using the Wheel

Cotter Pin. Repeat installation for other Wheel on the same side.

NOTE: Make sure Bottom Support Plate is facing up with correct direction.

4.        

Parts Required:

1 x Front Long Support Plate

(#20)

1 x Back Long Support Plate

(#21)

4 x Screw

(#D)

Installation:

• Secure one Long Support Plate to one Support Leg for Wheel using two

screws. Ensure the flat side of the Support Plate is facing outwards.

Repeat the same installation to mount the other Long Support Plate to

the other Support Leg.

5.        

Parts Required:

4 x Screw

(#D)

Installation:

• Next, Secure the Long Support Plates to the Support Legs for Caster

Wheel. Secure using two screws for each plate.

12 11







ENGLISH

6.      

Parts Required:

1 x Main Barrel

(#4)

12 x Screw

(#A)

12 x Washer

(#B)

12 x Locking Washer

(#C)

Installation:

• Prepare the Main Barrel to be mounted to the Cart. Carefully, lift the Cart

into an upright position with the wheels on the bottom. Position the

Cart next to the Main Barrel, with both facing the same direction. Lock

the Caster Wheels on the Cart. Using a second person, prepare to lift the

Main Barrel onto the Cart. With one person lifting from the hopper side,

and the other person lifting from the opposing barrel end, carefully lift

the Main Barrel, and slowly lower onto the Cart. Note illustration 6A.

• Next, open the Main Barrel lid. Adjust the rotation as needed to align

the screw holes of the Main Barrel to the Cart. Once placed, secure each

leg to the Main Barrel using three screws, washers, and locking washers.

Note illustration 6B.

7.      

Parts Required:

4 x Screw

(#E)

Installation:

• Secure each Long Support Plate to the Main Barrel using two screws

8.    

Parts Required:

1 x Lid Stopper

(#1)

Installation:

• Secure the Lid Stopper onto the top of the Main Barrel using the pre-

installed screw on top of the Main Barrel.

9.    

Parts Required:

1 x Lid Handle

(#2)

2 x Lid Handle Bezel

(#3)

Installation:

• Remove the pre-installed screws from the Lid Handle. From inside the

barrel lid, insert one screw protrude to the outside. Add a Bezel on

the screw. Then hand-tighten the screw (from the inside) into the Lid

Handle. Repeat for other side.

6

6





ENGLISH

10.     

Parts Required:

1 x Flame Broiler Main Plate

(#8)

1 x Flame Broiler Slider

(#7)

Installation:

• Insert the Flame Broiler Main Plate into the main grill. Rest the Flame

Broiler Main Plate on the built-in ledge (on the inside right) of the

Main Grill that directs grease towards the grease bucket spout. Slide

the entire piece to the left side, and the two slots on the Flame Broiler

Main Plate will fit into the rounded ledge above the burn pot. It will sit

slightly at a downward angle. Note illustration 10A.

IMPORTANT: If the Main Plate is resting on the base of the Barrel,

it is installed incorrectly. Poor installation may result in damage to

your Main Grill Barrel.

• Place the Flame Broiler Slider on top of the Flame Broiler Main Plate

covering the slotted openings. Ensure the raised tab is on the left

and the two pins at the bottom of the Flame Broiler Slider place into

the holes of the Flame Broiler Main Plate to easily adjust for direct and

indirect flame when cooking. Both flame broiler parts are lightly

coated with oil to avoid rusting when shipped. Note illustration 10B.

NOTE: To maintain the searing and grilling performance of your cooking

grids, regular care and maintenance Is required. See Owner's Manual.

11.     

Parts Required:

1 x Flame Broiler Adjusting Bar

(#5)

1 x Flame Broiler Adjusting Bar Handle

(#6)

Installation:

• Insert the Flame Broiler Adjusting Bar through the opening hole on

the left side of the Main Barrel. Add the Flame Broiler Adjusting Bar

Handle on the end outside the Barrel. Next, slide the notched end of the

Adjusting Bar into the locking tab on the Flame Broiler Slider, giving you

adjustable access to the Flame Broiler Slider on the Main Plate.

12.    

Parts Required:

1 x Side Table

(#26)

2 x Screw

(#A)

2 x Washer

(#B)

2 x Locking Washer

(#C)

Installation:

• Loosen the two pre-installed screws from the side of the Main Barrel.

Hook up the Side Shelf on the screws first then secure the two pre-

loosened screws into place.

• From underneath, secure the Side Shelf to the side panel of the Main

Barrel using two screws, washers, and locking washers.

10 7

10

12 26











ENGLISH

13.     

Parts Required:

1 x Front Shelf Bracket Right

(#23)

1 x Front Shelf Bracket Left

(#24)

4 x Screw

(#A)

4 x Washer

(#B)

4 x Locking Washer

(#C)

Installation:

• Secure each Front Shelf Support Bracket onto the Front Support Leg by

using two screws, washers and locking washers.

14.    

Parts Required:

1 x Front Shelf

(#22)

Installation:

• Place the Front Shelf on the Front Shelf Support Brackets. Note

illustration 14A as unfolded Front Shelf.

• Note illustration 14B as folded Front Shelf.

• Front Shelf can also be placed on the Bottom Support Plates and be used

as Bottom Plate. Note illustration 14C.

15.     

Parts Required:

1 x Cooking Grid A

(#27)

2 x Cooking Grid B

(#28)

1 x Porcelain-Coated Steel Upper Warming Rack

(#29)

Installation:

• Place the Cooking Grids, side by side, on the grid ledge inside the Main Grill.

• Place the Upper Cooking Rack on the upper ledge inside the Main Grill.

The Warming Rack will lock into place.



14

14

14

ENGLISH

16.    

Parts Required:

1 x Grease Bucket

(#25)

Installation:

• Place the Grease Bucket on the spout hook on the end of the Main Barrel.

Ensure it is level to avoid grease spills.

• The unit is now completely assembled.

17.     

NOTE: Before plugging your Pit Boss®into any electrical outlet, ensure

the temperature dial is in the OFF position.

•

 

This appliance requires 110-120 volt, 60hz, 250w, 5 amp service. It must

be a 3-prong grounded plug. Ensure grounded end is not broken off

before use. The control uses a 5 amp, 110-120 volt, fast-blow fuse to

protect the board from the igniter.

•

 

This appliance will work on most GFCI outlets, with a recommended

size of 15 amp service. If your GFCI outlet is highly sensitive to power

surges, it will likely trip during the start-up phase of operation. During

the start-up phase, the igniter draws 200-700 watts of electricity, which

can be too much power for a GFCI outlet to handle. Each time it trips, it

increases in sensitivity. If the GFCI keeps tripping, replace the outlet or

change to a non-GFCI outlet.

•

  

Disconnect the igniter from the main wiring harness. Use the manual

start-up procedure. A Pit Boss®unit can operate using a 12 volt, 100 watt

inverter plugged into your automobile outlet. To use the automatic

igniter, it is recommended to use a minimum of a 1000 watt inverter.

IMPORTANT: Disconnect unit from power source when not in use.

Refer to Owner's Manual for Operating Instructions.

 ,

5 

Otros manuales para Navigator PB850G

Este manual sirve para los siguientes modelos

Tabla de contenidos

Idiomas:

Otros manuales de Parrilla de Pit Boss

Pit Boss

Pit Boss PTG2SS Manual de instrucciones

Pit Boss

Pit Boss PRO Series Instrucciones de instalación

Pit Boss

Pit Boss PB260PSP2 Manual de usuario

Pit Boss

Pit Boss 10923 Manual de usuario

Pit Boss

Pit Boss PB757GD Instrucciones de instalación

Pit Boss

Pit Boss PB700FBW2 Manual de lista de piezas

Pit Boss

Pit Boss 10559 Manual de usuario

Pit Boss

Pit Boss 10697 Instrucciones de instalación

Pit Boss

Pit Boss PRO PB16DDPS2 Instrucciones de instalación

Pit Boss

Pit Boss PB2BPGG Manual de usuario

Pit Boss

Pit Boss Sportsman PB0500SP Manual de usuario

Pit Boss

Pit Boss 71240 Guía rápida

Pit Boss

Pit Boss PB3BPGG Manual de usuario

Pit Boss

Pit Boss 700FB Instrucciones de instalación

Pit Boss

Pit Boss PBMEMUU001 Manual de lista de piezas

Pit Boss

Pit Boss PLATINUM LAREDO 1000 Manual de usuario

Pit Boss

Pit Boss PB340 Manual de usuario

Pit Boss

Pit Boss RANCH HAND PB440TGR1 Manual de lista de piezas

Pit Boss

Pit Boss 71340 Guía rápida

Pit Boss

Pit Boss MEMPHIS PBMEMU1 Manual de usuario

Pit Boss

Pit Boss 440D2 Instrucciones de instalación

Pit Boss

Pit Boss Navigator 150 Manual de usuario

Pit Boss

Pit Boss COMPETITION PB1230CS1 Manual de usuario

Pit Boss

Pit Boss PB2BPGG Manual de usuario

Manuales populares de Parrilla de otras marcas

Orbegozo

Orbegozo GR 2300 Manual de usuario

bora

bora PT11 Manual de usuario

Klarstein

Klarstein 10031664 Manual de usuario

Garland

Garland MWE3W Manual de usuario

Char-Broil

Char-Broil 463722714 Manual de usuario

Nexgrill

Nexgrill 720-0830HK Manual de usuario

Kenmore

Kenmore 415.16123800 Manual de usuario

Camp Chef

Camp Chef PG24CLAU Manual de usuario

Tucker Barbecues

Tucker Barbecues GTR Series Instrucciones de montaje

Monogram

Monogram ZGG540NCP1SS Manual de usuario

Equipex

Equipex Sodir Savoy Manual de usuario

Gaggenau

Gaggenau VR 414 610 Manual de usuario

Miele

Miele KM 408-1 Manual de usuario

George Foreman

George Foreman GGR50B Manual de usuario

AOG

AOG T series Manual de usuario

Gorenje

Gorenje TG2000CB Manual de instrucciones

Weber

Weber Genesis Silver-B Permamount NG 051701 Manual de usuario

Glen

Glen SA 3037 Manual de usuario