Pioneer VSX-932 Guía de instalación

Before Start ............................................................................2

What's in the box......................................................................2

Part Names .............................................................................3

Part Names ..............................................................................3

Install ......................................................................................7

Installation procedure ...............................................................7

Step1: Speaker Layout .............................................................8

Step2: Connect the Speakers.................................................14

Step3: Connect the TV & AV Components.............................16

Initial Setup ..........................................................................21

Initial Setup with Auto Start-up Wizard ...................................21

Playback ...............................................................................23

AV Component Playback........................................................23

BLUETOOTH® Playback........................................................23

Network Functions..................................................................24

USB Storage Device...............................................................25

Listening To the AM/FM Radio ...............................................26

Listening Mode .......................................................................28

The Basic Manual includes information needed when starting up and

also instructions for frequently used operations. The Advanced Manual

has more detailed information and advanced settings.

Basic

Manual

AV Receiver

VSX-932

> Before Start > Part Names > Install > Initial Setup > Playback > Advanced Manual

Troubleshooting | Supplementary Information, etc.

Before Start

What's in the box

1. Main unit (1)

2. Remote controller (RC-957R) (1), Batteries (AAA/R03)

(2)

3. Speaker setup microphone (1)

0Used during Initial Setup.

4. Indoor FM antenna (1)

5. AM loop antenna (1)

0Quick Start Guide (1)

0Basic Manual (This manual)

0Connect speakers with 4 Ω to 16 Ω impedance.

0The power cord must be connected only after all other

cable connections are completed.

0We will not accept responsibility for damage arising from

the connection of equipment manufactured by other

companies.

0Functionality may be introduced by firmware updates

and service providers may cease services, meaning that

some network services and content may become

unavailable in the future. Furthermore, available services

may vary depending on your area of residence.

0Details on the firmware update will be posted on our

website and through other means at a later date.

0Specifications and appearance are subject to change

without prior notice.

> Before Start > Part Names > Install > Initial Setup > Playback > Advanced Manual

Troubleshooting | Supplementary Information, etc.

Part Names

Front Panel

1. INPUT SELECTOR dial: Switch the input to be played.

2. MCACC indicator: This lights when you have enabled the speaker calibration made with

MCACC (P21).

3. FL OFF indicator: This lights when you have pressed DIMMER repeatedly to turn the

display off.

4. DIMMER button: You can switch the display off or adjust the brightness of the display in

three steps.

5. TUNING MODE button: Switches tuning to an AM/FM station between automatic tuning

and manual tuning.

6. +FAVORITE

button: Used to register AM/FM radio stations.

7. HOME MENU button: Displays the Home. (*)

8. Display (P4)

9. Cursor buttons ( /  /  / ) and ENTER button: Select the item with the cursors and

press ENTER to confirm. Use them to tune to stations when using TUNER (P26).

10.

NETWORK indicator: This lights when "NET" is selected with the input selector and the

unit is connected to the network. If the unit is in standby mode, this lights when functions

such as HDMI CEC and network standby are enabled.

11.

WIRELESS indicator: Lights when the unit is connected to the wireless network.

12.

Remote control sensor: Receives signals from the remote controller.

0The signal range of the remote controller is within about 16´/5 m, at an angle of 20° on

the perpendicular axis and 30° to either side.

13.

RETURN button: Returns the display to the previous state.

14.

MASTER VOLUME

15.

ÍSTANDBY/ON button

16.

PHONES jack: Headphones with a standard plug (Ø1/4"/6.3 mm) are connected.

17.

MCACC SETUP MIC jack: The supplied speaker setup microphone is connected.

> Before Start > Part Names >Install >InitialSetup >Playback > Advanced Manual

Troubleshooting | Supplementary Information, etc.





    

  



> Before Start > Part Names >Install >InitialSetup >Playback > Advanced Manual

Troubleshooting | Supplementary Information, etc.

18.

Listening mode button: Press "AUTO/DIRECT",

"SURROUND" or "STEREO" to switch the listening

mode (P28). (*)

19.

SOUND RETRIEVER button: Turns on/off the Sound

Retriever function that provides better sound quality for

compressed audio.

20.

PURE DIRECT button: Switches to the Pure Direct

mode. (P28)

21.

USB port: A USB storage device is connected so that

music files stored in it can be played. You can also

supply power (5 V/500 mA) to USB devices with a USB

cable.

22.

AUX INPUT jack: Connect a video camera, etc., using

a stereo mini plug cable (Ø1/8"/3.5 mm).

(*)You can find details in the Advanced Manual.

Display

1. This may light when performing operations with the "NET", "USB" input

selector.

2. Lights in the following conditions.

: When connected by BLUETOOTH.

: When connected by Wi-Fi.

NET: When "NET" is selected with the input selector and the unit is

connected to the network. It will flash if the connection to the network is

not correct.

USB: When "USB" is selected with the input selector and the unit is

connected by USB and the USB device is selected. Flashes if the USB

is not properly connected.

HDMI: When HDMI signals are input and the HDMI input is selected.

DIGITAL: When digital signals are input and the digital input is

selected.

3. Lights according to the type of input digital audio signals and the

listening mode.

4. Lights in the following conditions.

RDS: Receiving RDS broadcasting.

TUNED: Receiving AM/FM radio.

STEREO: Receiving FM stereo.

SLEEP: When the sleep timer is set.

AUTO STBY: Auto Standby is on.

5. Lights when headphones are connected.

6. Flashes when muting is on.

7. Displays various information of the input signals.

8. Lights when adjusting the volume.

9. Speaker/Channel display: Displays the output channel that

corresponds to the selected listening mode.







Rear Panel

1. DIGITAL AUDIO IN OPTICAL/COAXIAL jacks: Input TV or AV component digital audio

signals with a digital optical cable or digital coaxial cable.

2. VIDEO IN jacks: Input the AV component video signals with an analog video cable.

3. NETWORK port: Connect to the network with an Ethernet cable.

4. USB port: A USB storage device is connected so that music files stored in it can be

played. You can also supply power (5 V/500 mA) to USB devices with a USB cable.

5. Wireless antenna: Used for Wi-Fi connection or when using a BLUETOOTH enabled

device. Adjust their angles according to the connection status.

6. HDMI OUT jacks: Transmit video signals and audio signals with a HDMI cable connected

to a TV.

7. HDMI IN jacks: Transmit video signals and audio signals with a HDMI cable connected to

an AV component.

8. Power cord

9. SIGNAL GND terminal: The ground wire of the turntable is connected.

10.

AUDIO IN jacks: Input AV component audio signal with an analog audio cable.

11.

ANTENNA AM LOOP/FM UNBAL 75Ω terminal: The supplied antennas are connected.

12.

SUBWOOFER PRE OUT jack: Connect a powered subwoofer with a subwoofer cable.

Up to two powered subwoofers can be connected. The same signal is output from each of

the SUBWOOFER PRE OUT jacks.

13.

SPEAKERS terminals: Connect speakers with speaker cables.

> Before Start > Part Names >Install >InitialSetup >Playback > Advanced Manual

Troubleshooting | Supplementary Information, etc.

180°

90°



   

 





> Before Start > Part Names >Install >InitialSetup >Playback > Advanced Manual

Troubleshooting | Supplementary Information, etc.

Remote Controller

1. ÍSTANDBY/ON button

2. Input selector buttons: Switches the input to be played.

3. 21 button: Select the input to be played.

4. (AV ADJUST) button: Press during play to display the AV

Adjust on the TV and display to adjust sound quality, etc. Note

that there is no display on the TV screen when the input selector

is "CD", "TV", "PHONO", "AM", or "FM", so follow the display on

the main unit while doing the operations. (*)

5. Cursor buttons and ENTER button: Select the item with the

cursors and press ENTER to confirm your selection. When the

folder or file lists are not shown on one screen on the TV, press

/ to change the screen.

6. button: Displays the Home. (*)

7. Volume buttons

8. button: Temporarily mutes audio. Press again to cancel

muting.

9. LISTENING MODE buttons: Allows you to select the listening

mode (P28). (*)

10.

Play button: Used for play operations when playing Music Server

or USB.

11.

button: Used for repeat or random play operations when

playing Music Server or USB. Each time you press the button, the

mode switches from (1-track repeat), to (folder repeat),

to (random).

CLEAR button: Deletes all characters you have entered when

entering text on the TV screen.

12.

button: Switches the information on the display and is used to

operate RDS (P27).

13.

button: Returns the display to the previous state.

14.

MODE button: Switches tuning to an AM/FM station between

automatic tuning and manual tuning.

15.

+Fav button: Used to register AM/FM radio stations.

0MAIN and ZONE are not used.

(*)You can find details in the Advanced Manual.































Installation procedure

This unit can be used in a number of ways, depending on

the layout of the speakers you are installing, and the

connections made to external devices. Read the following

to help make the installation process smoother.

Step1: Speaker Layout

Select the speaker layout that suits the types of speakers

you have and the conditions they will be used in from the

choices presented on pages P8 to P12, then install the

speakers by referring to the illustrations and explanations

on the relevant page. Speaker layouts include systems that

use surround back speakers, systems that use height

speakers, and systems that use Bi-Amping speakers. Also

refer to the combinations available in "Speaker

combinations" on P13.

Step2: Connect the Speakers

To connect the speaker systems to this unit, refer to P14 if

you are using a speaker layout described on one of P8 to

P11, and to P15 to use a speaker layout using Bi-Amping

speakers described on P12. The connection process will be

smoother if you refer to the illustrations and explanations

and prepare the required cables before hand.

Step3: Connect the TV & AV Components

Refer to P16 to P20 to connect your external devices such

as your TV, Blu-ray Disc Player, and also supplied

accessories such as the antennas. The connection process

will be smoother if you refer to the illustrations and

explanations, confirm the connection types on the external

devices, and prepare the required cables before hand.

> Before Start > Part Names >Install > Initial Setup > Playback > Advanced Manual

Troubleshooting | Supplementary Information, etc.

2 3

Install

Step1: Speaker Layout

7.1 Channel System

Front speakers output front stereo sound and a center

speaker outputs center sound such as dialogs and vocals.

Surround speakers create back sound field. Powered

subwoofer reproduces bass sounds and creates rich sound

field.

This basic 5.1 Channel System with surround back

speakers added is called a 7.1 Channel System. The

connection of surround back speakers improves the sense

of envelopment and connectivity of sound created by the

back sound field and provides a more real sound field.

Furthermore, by installing surround back speakers, you can

select the Dolby Atmos listening mode, which realizes the

most up-to-date 3D sound, when the input format is Dolby

Atmos.

The front speakers should be positioned at ear height, while

the surround speakers should be positioned just above ear

height. Center speaker should be set up facing the listening

position. Placing the powered subwoofer between the

center speaker and a front speaker gives you a natural

sound even when playing music. The optimal positioning is

for surround back speakers to be at ear height.

0If you are including surround back speakers in the setup,

surround speakers are required.

1,2 Front Speakers

3 Center Speaker

4,5 Surround Speakers

6 Powered Subwoofer

7,8 Surround Back Speakers

> Before Start > Part Names >Install > Initial Setup > Playback > Advanced Manual

Troubleshooting | Supplementary Information, etc.

＊1

＊2

＊3

½1: 22e to 30e, ½2: 90e to 110e, ½3: 135e to 150e

5.1.2 Channel System-1

(Front High Speakers/Rear High Speakers)

This is a basic 5.1 channel system consisting of front

speakers, a center speaker, surround speakers, and a

powered subwoofer, with the addition of front height

speakers or rear high speakers, which are both types of

height speakers. By installing height speakers, you can

select the Dolby Atmos listening mode, which realizes the

most up-to-date 3D sound including overhead sounds,

when the input format is Dolby Atmos.

Front high speakers or rear high speakers should be

situated at least 3´/0.9 m higher than the front speakers.

Front high speakers should be situated directly above the

front speakers and the distance between the rear high

speakers should match the distance between the front

speakers. Both should be set up facing the listening

position.

7,8 Height Speakers

Choose one of the following:

0Front High Speakers

0Rear High Speakers

> Before Start > Part Names >Install > Initial Setup > Playback > Advanced Manual

Troubleshooting | Supplementary Information, etc.

＊1

＊2

3´ (0.9 m)

or more

3´ (0.9 m)

or more

½1: 22e to 30e, ½2: 120e

5.1.2 Channel System-2

(Ceiling Speakers)

This is a basic 5.1 channel system consisting of front

speakers, a center speaker, surround speakers, and a

powered subwoofer, with the addition of top front speakers,

top middle speakers, or top rear speakers, which are types

of height speakers. By installing height speakers, you can

select the Dolby Atmos listening mode, which realizes the

most up-to-date 3D sound including overhead sounds,

when the input format is Dolby Atmos.

Fit top front speakers on the ceiling forward of the seating

position, top middle speakers on the ceiling directly above

the seating position, and top rear speakers on the ceiling

behind the seating position. The distance between each

pair should match the distance between the two front

speakers.

0Dolby Laboratories recommends placing this type of

height speakers to obtain the best Dolby Atmos effect.

7,8 Height Speakers

Choose one of the following:

0Top Front Speakers

0Top Middle Speakers

0Top Rear Speakers

> Before Start > Part Names >Install > Initial Setup > Playback > Advanced Manual

Troubleshooting | Supplementary Information, etc.

＊1

＊2

＊3

½1: 30e to 55e, ½2: 65e to 100e, ½3: 125e to 150e

Tabla de contenidos

Otros manuales de Receptor de Pioneer

Pioneer

Pioneer SX-424 KUW Manual de usuario

Pioneer

Pioneer VSX-1128-K Manual de usuario

Pioneer

Pioneer VSX-920-K Manual de usuario

Pioneer

Pioneer VSX91TXH - Elite AV Receiver Manual de usuario

Pioneer

Pioneer VSX-415-K Manual de usuario

Pioneer

Pioneer AVH-X5800BHS Manual de usuario

Pioneer

Pioneer AVH-Z2250BT Manual de usuario

Pioneer

Pioneer AVIC-W8600NEX Manual de usuario

Pioneer

Pioneer AVH-X8800BT Manual de usuario

Pioneer

Pioneer MVH-S520BT Manual de usuario

Pioneer

Pioneer Elite SC-89 Manual de usuario

Pioneer

Pioneer MVH-S219BT Manual de usuario

Pioneer

Pioneer AVIC-X920BT Manual de usuario

Pioneer

Pioneer MVH-S322BT Manual de usuario

Pioneer

Pioneer VSX-D507S Manual de usuario

Pioneer

Pioneer AVH-269BT Manual de usuario

Pioneer

Pioneer Elite VSX-43 Manual de usuario

Pioneer

Pioneer XV-HTD540 Manual de usuario

Pioneer

Pioneer VSX-531 Manual de usuario

Pioneer

Pioneer DEH-8350SD Manual de usuario

Pioneer

Pioneer VSX-516-K Manual de usuario

Pioneer

Pioneer XV-HTD640 Manual de usuario

Pioneer

Pioneer XV-DV303 Instrucciones de uso

Pioneer

Pioneer MVH-S520DAB Manual de usuario

Manuales populares de Receptor de otras marcas

Garmin

Garmin GA 23 Manual de usuario

Aiphone

Aiphone PS-12F Manual de usuario

IMES

IMES TCS-01CA-PMI Manual de usuario

BWI Eagle

BWI Eagle AIR-EAGLE SR Manual

AMIMON

AMIMON AMN12310 WHDI Manual de usuario

Dual

Dual DMCPA79BT Instrucciones de funcionamiento

Sound Associates

Sound Associates SA652P Manual de usuario

Sherwood

Sherwood NewCastle R-772 Manual de usuario

Audio

Audio A10-RX Series Manual de usuario

AllSee

AllSee PushShare PSRV1.1 Manual de usuario

DEMAG

DEMAG DRC-DR D2 Manual de usuario

Teleco

Teleco TVRCL868A02 Manual de usuario

Bosch

Bosch RF3222E Manual de usuario

Kramer

Kramer 631R Manual de usuario

Xpress

Xpress xmc10 Manual de usuario

JVC

JVC KD-MR1BTS Manual de usuario

Omega Engineering

Omega Engineering UWTC-REC3 Manual de usuario

e-survey

e-survey E300 Pro Manual de usuario