Phylink PLC-325PW Bullet HD Manual de usuario
VERSION 1.3
Btulle
Contents
1. Verify the package contents
Verify the package contents against the list below.
PLC-325PW/PLC-335PW Network Camera
Camera Stand
External Antenna
Manual and Software on CD-ROM
CAT5 Ethernet Cable
Power Adapter
Quick Install Guide
1. Verify the package contents ................................................................ 2
2. Hardware Overview .................................................................................3
3. Hardware Installation ............................................................................. 5
4. Quick installation for iOS device ........................................................ 6
5. Quick installation for Android device .............................................12
6. Camera installation on PC ...................................................................17
7. Installation via Web Browser ............................................................. 24
PHYLINK Bullet HD Quick Install Guide
This installation guide provides basic instructions for installing the PLC-325PW/
PLC-335PW on your network and then configure Android, iOS App and PC software to
view the camera.
Phylink’s website contains the latest user documentation and software updates for
Phylink’s products. Please visit www.phylink.com for more details.
For more information about how to use the camera, please see the User Manual on the
CD included with this package.
2. Hardware Overview
2
1
3
5
7
6
4
8
9
10
11
12
1
3
5
13
1. Sun Shield
2. External Antenna
3. Front Shell
4. Microphone
5. Stand
6. Reset/WPS Button
7. Camera Cable
8. Status indicator LED
9. Infrared LED
10. Light Sensor
11. Power Connector
12. Ethernet RJ45 connector
13. Micro SD Card slot
14
14. Wrench
PHYLINK Bullet HD Quick Install Guide
PHYLINK Bullet HD Quick Install Guide
Monitors lighting conditions and switches
between color and infrared accordingly.
Light sensor
Local storage for storing recorded image
and video.
Micro SD Card slot
Connects to the included DC 12V power adapter.
Power Connector
Reset/WPS Button
Press and hold this button for 5 seconds to reset the camera.
Note that all settings will be restored to factory default.
Status indicator LED
Short press this button to setup a wireless connection automatically.
After camera is powered on, the indicator LED shows yellow light and quickly off
which means the system is being started. When the indicator LED shows yellow
again, it means the system has started successfully.
Red light is for wired connection and WPS status, yellow light for wireless connection.
The indicator LED flashes during data transfer.
The design of wrench on the bracket makes you easily screw the mount bracket without
any extra tool.
Wrench on Mount Bracket
You can screw the wrench on the mount bracket to lock it.
3. Hardware Installation
PHYLINK Bullet HD Quick Install Guide
Connect the camera to your router or switch using the network cable.
Using the included power adaptor, plug one end into the Power Connector and plug
the other end into a power outlet.
Connect Network and Power
Camera Cable DC Power Cable
Network Cable Router
Note: The DHCP sever and UPnP must be enabled on your router (which is default
setting on most router) to assign a local IP address to the network camera.
If needed, please refer to your router's user manual on how to enable DHCP server
and UPnP.
The Bullet HD camera can be either connected with Power Adaptor and network cable,
or optionally with a CAT-5 network cable that is connected to an 802.3af compatible
PoE Switch or PoE Injector. Under this condition, the network cable will transmit both
power and data over a single cable and you don’t need to connect the power adapter.
IMPORTANT!
Please note that for initial setup, you need to connect the camera directly to your
router or switch with a network cable. You can NOT connect wirelessly to the
camera without first setting it up via a network cable. After initial setup only the
power cable is required for the Wi-Fi connection.
Connection Using a PoE Switch or PoE Injector
If using a Wi-Fi Network connection, the provided external antenna must be mounted
to the SMA connector at the rear of camera main body. Please keep the antenna vertical
for better signal strength.
Mount the antenna
4. Quick installation for iOS device
4.1 Camera installation on iOS device
PHYLINK Bullet HD Quick Install Guide
There are three ways to add a camera on an iOS device.
Option 1
Automatically search in Local Area Network
Enter the " ". ( The default password is "admin". )Password
Assign a " " to the camera to help identify this camera if more than one cameraName
is in use. ( The default name is "Camera". )
Press " " button and your camera will show up under “ ”.Save Camera List
If your camera is in the same Local Area Network with your smartphone, the App can
search the cameras automatically. If the camera UID shows up on list then press the
UID for the camera you are setting up.
Search "PHYCAM" App from App Store, download and install it.
Start the App and then the " " screen will appear.Add Camera
Event Playback Add Camera Info
Camera
Add Camera
17:50 63%
Camera Found! (2)
Camera Found! (2)
Add QRCode
VNW5V15K6RY7J4VWC7W1
192.168.168.102
THG5T55K2RY7K1VWC7XJ
192.168.168.103
iPhone
Add Camera
17:50 63%
Cancel
Name
THG5T55K2RY7K1VWC7XJ
Save
Camera
UID
Account admin
PasswordPassword
iPhone
PHYLINK Bullet HD Quick Install Guide
Option 2
Scan the camera UID using Smartphone
Manually type UID
Option 3
If your camera is not in the same Local Area Network with your Smart phone,
the App can NOT search cameras for Local Network.
Press " " button to scan the camera UID from the sticker on the .QRCode Camera Cable
Press " " button and manually type "UID" according to the UID sticker on theAdd
.Camera Cable
Enter the " ". ( The default password is "admin". )Password
Assign a " " to the camera to help identify this camera if more than one cameraName
is in use. ( The default name is "Camera". )
Press " " button and your camera will show up under “ ”.Save Camera List
Enter the " ". ( The default password is "admin". )Password
Assign a " " to the camera to help identify this camera if more than one cameraName
is in use. ( The default name is "Camera". )
Press " " button and your camera will show up under “ ”.Save Camera List
Event Playback Add Camera Info
Camera
Add Camera
17:50 63%
Camera Found! (2)
Camera Found! (2)
Add QRCode
VNW5V15K6RY7J4VWC7W1
192.168.168.102
THG5T55K2RY7K1VWC7XJ
192.168.168.103
17:50 63%
Place a barcode inside the
viewfinder rectangle to scan it.
Cancel Light
iPhone iPhone
PHYLINK Bullet HD Quick Install Guide
Press on the Camera name from “ ” for "Live View" with a wired connection.Camera List
Press the "Back" button to go back to the “ ”.Camera List
Press to View saved pictures.
Press to take a snapshot.
Press to start listening or stop listening.
Press to start speaking or stop speaking.
Live View
17:50 63%
Back
Camera
Online / LAN
768x432 / FPS: 16 / BPS: 154 Kbps
iPhone
4.2 Wireless Setup on iOS device
PHYLINK Bullet HD Quick Install Guide
There are two ways to setup the wireless connection.
Option 1
Quick setup with smart phone
Go to > .Advanced Setting Network Setup
Event Playback Add Camera Info
Camera
Camera List
17:50 63%
VNW5V15K6RY7J4VWC7W1
Edit
Connected
Camera
V5G5SX5U2TE71JBWC7W1
Connected
Camera
iPhone
Edit Camera
17:50 63%
Back
Name Camera
Account admin
Password
Reconnect Connected
Security Code
Advanced Setting
Advanced Setting
17:50 63%
Back
Motion Detection
Video Quality
Alarm Recording
Microphone
Speaker Not available
Network Setup
Alarm Actions
Login Account
iPhone iPhone
Press on from the and go to the .Camera List Edit Camera
PHYLINK Bullet HD Quick Install Guide
Network Setup
17:52 62%
Back
WiFi Networks
Data & Time
WiFi Networks
17:52 62%
Back
CHOOSE A NETWORK...
D-Link_DIR-612
TP-Link_245416
FAST_11DA2E
phr-002
Enter Password
17:52 62%
Cancel Join
Password
After a successful wireless setup, you can remove the network cable and the camera should
work through the wireless network after a short delay.
Press , then the App will search for available wireless networks,WiFi Networks
select your network among this list.
Type your Wi-Fi password and press the “ ” button to complete the Wi-Fi setup.Join
iPhone iPhone
iPhone
Otros manuales para PLC-325PW Bullet HD
4
Este manual sirve para los siguientes modelos
1
Tabla de contenidos
Otros manuales de Cámara de seguridad de Phylink
Phylink
Phylink PLC-128PW Manual de usuario
Phylink
Phylink Bullet Pro PLC-336PW Manual de usuario
Phylink
Phylink PLC-128 Series Manual de usuario
Phylink
Phylink PLC-223W Manual de usuario
Phylink
Phylink PLC-325PW Bullet HD Manual de usuario
Phylink
Phylink Cube HD Manual de usuario
Phylink
Phylink PLC-128 Series Manual de usuario
Phylink
Phylink PLC-128 Series Manual de usuario
