Phoenix Mecano HARTMANN ELECTRONIC PXE100A Series Manual de usuario
www.hartmann-electronic.com Rev. 1.0 1
PXI Express
Desktop PC Expansion
PCIE101A \ PXE100A
User’s Manual
www.hartmann-electronic.com Rev. 1.0 2
Revision History
Version: Notification of Change Date
1.0
10.01.2020
1.1 04.02.2020
Imprint:
Hartmann Electronic GmbH
Motorstraße 43, D-70499 Stuttgart (Weilimdorf)
Telephone: +49 711 1 39 89-0
Telefax: + 49 711 8 66 11 91
Internet: www.hartmann-electronic.com
HartmannElectronicisalongstandingpartnerofthe
Embeddedindustryandhasavarietyofdifferentbackplanes.
Withourwideselectionofbackplanesandenclosureyoucan
Buildyourperfectsystemplatform
Copyright©2017
All rights and technical modifications reserved
www.hartmann-electronic.com Rev. 1.0 3
Contents
1. Safety.....................................................................................................................................................................4
Intended Application..............................................................................................................................................4
Safety Symbols .....................................................................................................................................................4
General Safety Precautions ..................................................................................................................................4
Safety Instructions.................................................................................................................................................5
Protection Against Electromagnetic Interference (EMI).....................................................................................5
Electrostatic Discharge Precautions...................................................................................................................5
Installation ..........................................................................................................................................................5
Location..............................................................................................................................................................5
Voltage Hazards.................................................................................................................................................5
System Overheating...........................................................................................................................................5
Mounting Considerations....................................................................................................................................6
Electrical Hazards...............................................................................................................................................6
Board Installation................................................................................................................................................6
2. Product Description ...............................................................................................................................................7
Related Documentation.........................................................................................................................................7
Chassis Description...............................................................................................................................................8
Block Diagram.......................................................................................................................................................9
PCIE101A PCIe Gen. 3 X4 PC Card..................................................................................................................9
PXE100A PCIe Gen. 2 Uplink to PXI Express.................................................................................................10
Front Panel LEDs................................................................................................................................................11
Cabling ................................................................................................................................................................11
Installation................................................................................................................................................................12
Installing Hardware..............................................................................................................................................12
Installing Software...............................................................................................................................................14
3. Specification ........................................................................................................................................................15
Electrical..............................................................................................................................................................15
DC Input ...........................................................................................................................................................15
Operating Environment ....................................................................................................................................15
Electromagnetic Compatibility..........................................................................................................................16
Environmental...................................................................................................................................................16
CE Compliance.................................................................................................................................................17
Mechanical ..........................................................................................................................................................18
4. Pin Assignment....................................................................................................................................................19
PXI Express System Controller Slot (4 Link Configuration)................................................................................20
5. Ordering Information............................................................................................................................................21
www.hartmann-electronic.com Rev. 1.0 4
1. Safety
Intended Application
The PXE100A series remote controller kit is not designed for stand-alone use -- in order to enable stand-
alone functionality, additional elements are required. An operational system is achieved only by way of
appropriate PXI Express Cards.
The completion and final testing of the units have been carried out by qualified technicians. These
instructions are intended to assist those who are qualified to operate this equipment.
Make sure that the finished system complies with the safety regulations currently applicable in the
country it is going to be used.
Safety Symbols
Hazardous voltage!
Familiarize yourself with the danger of electrical voltages and the safety
precautions before starting to work with parts that carry dangerous voltages
Caution!
This symbol indicates a condition where damage of the equipment or injury of
the service personnel could occur. To reduce the risk of damage or injury,
follow all steps or procedures as instructed.
Danger of electrostatic discharge!
Static electricity can damage sensitive components in a system. To avoid
damage, wear ESD wrist straps or at regular intervals touch blank enclosure
parts.
General Safety Precautions
Warning!
Voltages over 60 VDC can be present in this equipment. This equipment is
intended to be accessed, installed and maintained by qualified and trained service
personnel only.
This equipment is designed in accordance with protection class 1.
It must therefore be operated only with protective GND/earth connection.
www.hartmann-electronic.com Rev. 1.0 5
Safety Instructions
This user's manual is intended for system Integrators and hardware/software engineers.
This product has been designed to meet the relevant standard industrial safety requirements. It is not
intended to be used in applications other than that of its specific area of the office telecommunication
industry and industrial control. It is not designed nor intended for use in safety-critical applications, life-
sustaining appliances or in aircraft.
Only trained personnel or persons qualified in electronics or electrical engineering are authorized to
install, operate or maintain the product.
This section provides safety information about the following:
Protection against electromagnetic interference (EMI)
Electrostatic discharge precautions
System installation
ProtectionAgainstElectromagneticInterference(EMI)
This product has been tested and found to comply with the limits for a Class A digital device, pursuant to
part 15 of the FCC Rules, EN 55022 Class A.
To ensure proper EMC shielding, operate the chassis only with filler panels covering all unpopulated
slots.
Ensure that all EMI gaskets make correct contact.
ElectrostaticDischargePrecautions
Electronic components can be easily destroyed by electrostatic discharge which can occur between
chassis components and a person.
Before working on the chassis, be sure that you are working in an ESD-safe environment or have
taken the necessary ESD precautions (ESD wrist strap, lab coat, etc.)
Installation
To avoid chassis damage, verify that the system environment meets or exceeds the environmental and
power requirements given in this guide before installation. In doing so, consider these guidelines:
Location
Locate the system in a stable area free of excessive movement or jarring, dust, smoke, and electrostatic
discharge (ESD). Make sure that the temperature does not exceed the operating temperature given in
the environmental requirements in this guide and allow room for proper air flow for cooling.
VoltageHazards
The system is powered with a power supply with the following voltage to the mains: 115/230VAC.
(Voltage range 90VAC to 264VAC)
This voltage is considered hazardous.
SystemOverheating
Ensure a clearance of at least 10 cm on both sides of the chassis to allow the needed air flow for proper
system cooling
Shelf ambient temperature may not exceed 50°C.
www.hartmann-electronic.com Rev. 1.0 6
MountingConsiderations
Assure that all components, structural or otherwise, were not loosened nor damaged during shipment
prior to use.
Do not operate under loose or damaged conditions as it may damage other parts of the system at large.
ElectricalHazards
The caution label on the system's rear, near the grounding studs, indicates a needed earth connection
due to the potential for high-leakage current which is considered hazardous.
High leakage current can cause injuries.
Ensure that the system is properly grounded at all times. Please account for the following condition:
This equipment shall be connected directly to the AC supply system earthing
BoardInstallation
Electrostatic discharge and incorrect board installation/removal can damage circuits or shorten their life.
Before touching the boards or electronic components, make sure that you are working in an ESD-
safe environment
Boards should be inserted and removed using their handles -- do not force the board by applying pressure to
the front panel.
www.hartmann-electronic.com Rev. 1.0 7
2. Product Description
The PXE100A series PXI Express Remote Controller is designed to operate in a PXI Express System Slot. The
controller complies with the PXI Express module form factor. With its use, a conventional Desktop PC is used to
control a PXI Express Chassis.
With the use of a Hartmann Electronic PCIE101A PC adapter, the Remote Controller is connected with a
standard PCIe X4 cable to the desktop PC. The interface of the PXE100A, as well as the interface of the
PCIE101A, are fully compliant with the PCI Express External Cable Specification, Revision 2.0.
Related Documentation
- PXI-5 PXI Express Hardware Specification
- CompactPCI PICMG 2.0 R. 3.0
- CompactPCI Express Specification PICMG EXP.0 Revision 2.0
- PCI Express External Cable Specification, Revision 2.0
www.hartmann-electronic.com Rev. 1.0 8
Chassis Description
The PXI Express Remote Controller is plugged into the PXI Express Backplane’s System Slot. The Space-saving
4 TE design allows ample space for additional system components as well as further PXI Express Modules,
conveniently placed directly next to the controller.
The Controller is suitable for PXI Express Chassis that implement a PXI Express System Slot 4-Link
configuration.
www.hartmann-electronic.com Rev. 1.0 9
Block Diagram
PCIE101APCIeGen.3X4PCCard
Figure 2-2 illustrates the hardware implementation of the PCIE101A PC Card.
Figure 2-1 PXI Express Remote Controller Block Diagram
The Block Diagram above outlines the Hardware implementation of the PCIe PC Card PCIE101A. As shown in
Figure 2-1, the PC-Card is available in both high and low profile versions of the front panel. This allows the PC
card to be plugged into any Desktop PC Chassis.
The PC Card can be plugged into a PCIe X4, PCIe X8 or PCIe X16 slot. The card re-drives a PCIe X4 link to the
standard PCIe X4 Cable Connector.
PCIe Gen. 3 data rates are supported with the card by utilizing a PCIe X4 Link.
www.hartmann-electronic.com Rev. 1.0 10
PXE100APCIeGen.2UplinktoPXIExpress
Figure 2-2 illustrates the hardware implementation of the PXI Express Remote Controller.
Figure 2-2 PXI Express Remote Controller Block Diagram
The Block Diagram above outlines the PXI Express Controller’s Hardware implementation. The controller’s
upstream port is implemented through a standard PCIe X4 Cable connector. A PCIe Gen. 2 X4 Link is supported
for connection with a desktop PC.
The controller can be plugged into any CPCI Express or PXI Express chassis’ system controller slot, which is
compliant with the necessary specifications. These specifications are listed in the “related document” section.
Este manual sirve para los siguientes modelos
3
Tabla de contenidos
Otros manuales de Hardware de computadora de Phoenix Mecano
Manuales populares de Hardware de computadora de otras marcas
EMC2
EMC2 VNX Series Manual del propietario
Panasonic
Panasonic DV0PM20105 Manual de usuario
Mitsubishi Electric
Mitsubishi Electric Q81BD-J61BT11 Manual de usuario
Gigabyte
Gigabyte B660M DS3H AX DDR4 Manual de usuario
Raidon
Raidon iT2300 Manual de usuario
National Instruments
National Instruments PXI-8186 Manual de usuario
