Phoenix Gold ZDA4.6 Manual de usuario

Model: Z110-V2, Z112-V2

4-Channel DSP Amplier

Model: ZDA4.6

• DSP + Amplier

• 800W Max Power, 400W RMS

• 4x60W @ 4Ohm, 4x100W @ 2Ohm

with DSP control

• PC Control software

(and APP control ready iOS and Android)

• BT streaming sold separately

(inludes APP Control)

KEY FEATURES

ZDA4.6 Owners Manual

ZDA4.6 - DSP AMPLIFIER

INSTALLATION

WHEN USING AN RCA INPUT:

u First, connect the positive wire (12v) to the vehicle battery (20A fuse is required)

u Next, connect the negative wire to the vehicle chassis to create a GND connection.

u Put the REM from main engine to “FL+” on the ZDA4.6 HI INPUT

u Finally, ensure all other connections are made, plug in PCA out, and ensure the unit

is xed securely in a location free of dirt and dust with enough ventilation for optimum

operation.

WHEN USING A HI INPUT:

u First, connect the positive wire (12v) to the vehicle battery (20A fuse is required)

u Next, connect the negative wire to the vehicle chassis in order to create

a ground connection.

u Finally, ensure all other connections are made, plug in PCA out, and ensure the unit

is xed securely in a location free of dirt and dust with enough ventilation for optimum

operation.

ZDA4.6 Owners Manual

ZDA4.6 - DSP AMPLIFIER

u First, ensure the mounting location is free of dirt and dust and that there is

enough ventilation in order to achieve optimum performance and avoid

overheating when the ZDA4.6 is in use.

u Keep the wire connections as short as possible but with sufcient length in

order to minimise any power losses and provide a higher audio output of

the system.

u Where possible route all power and speaker wiring through any existing

wire channels within the vehicle in order to ensure wiring does not pass

through sharp edged metal.

The Power Connection Mode shown (1) only applies to a power outlet less

than 40Watts; in other cases, please use power connection mode (2)

INSTALLATION - CONTINUED

ZDA4.6 Owners Manual

ZDA4.6 - DSP AMPLIFIER

SOFTWARE OPERATION INSTRUCTION

The PC software supplied offers a convenient and user-friendly interface that

allows you to save various settings and parameters from the ZDA4.6, along with

letting you switch or recover settings saved for multiple vehicles.

As well as the software included with the ZDA4.6, it can also be downloaded

here: phoenixgold-eu.com if required.

Windows XP/Vista/Windows 7/8/9/10.

The ZDA4.6 software is a standard WIN32 executable le named ZDA4.6.exe.

This software will need to be directly installed on your hard drive in order to

function.

INSTALLATION

OPERATION

Insert the CD in your computer. Once loaded, locate the ZDA4.6.exe le and

copy into a chosen location. Once copied, double click the .exe.le to open.

This will automatically create a ‘Data File’ in the same location. Once opened

the main interface will look like the image below.

ZDA4.6 Owners Manual

ZDA4.6 - DSP AMPLIFIER

SOFTWARE OPERATION INSTRUCTION

USB INTERFACE CONNECTION

OFFLINE ONLINE

Connect the DSP to your PC via the USB cable supplied. The PC will locate the

device, install and upgrade automatically. After a few seconds you will see a

new device added and called HID-compliant device. See image below:

If the DSP software is OFFLINE, the button on the main interface screen will be

RED. Once the DSP is connected, a dialogue box will show a ‘CONNECTING TO

DATA’ message on screen. After a few seconds, the OFFLINE button will change

to ONLINE and become GREEN.

The device appearing here means

the computer has identied the

machine successfully and can

move on to the next step to get

the software online.

ZDA4.6 Owners Manual

ZDA4.6 - DSP AMPLIFIER

SOFTWARE INTERFACE

ZDA4.6 Owners Manual

ZDA4.6 - DSP AMPLIFIER

EQUALISER FREQUENCY RESPONSE DRAGGING AREA

This area displays the output signal of the 10-BAND EQ parameters and

crossover parameters clearly and you can drag the mouse to set the

parameters. Left-click and drag the mouse in this 1-10 Band EQ display area

to adjust the EQ parameters; Left-click and drag the mouse in the display area

HPF (high pass or low cut) or LPF (low pass or high cut) to adjust the High Pass

(low cut) or Low Pass (high cut) frequency.

OUTPUT CHANNELS CORRESPONDING TO THE SOUND FILED

AND TIME DELAY

ZDA4.6 Owners Manual

ZDA4.6 - DSP AMPLIFIER

SOFTWARE OPERATION INSTRUCTION

OUTPUT CHANNELS

This area displays the CH1-CH6 output channel settings and you can click the

mouse in the corresponding output channel speaker for setting. When the

current editable channel is in white you can set the parameters accordingly.

TIME DELAY

This area displays the CH1-CH6 output channels time delay and you can left

click the mouse directly in the output channel speaker to nish adjustment.

There are MS/CM/ INCH unit buttons for time delay and distance delay setting.

Click the white letter in the editing area and you can input a number, roll the

mouse or use the keyboard arrow keys to nish the delay setting. The parame-

ters range is listed below:

AMS: 0.000 MS - 20.000 MS

BCM: 0.00 CM - 692.00 CM

C INCH: 0.00 INCH - 272.37 INCH

CROSSOVER AREA

ZDA4.6 Owners Manual

ZDA4.6 - DSP AMPLIFIER

EQ PARAMETERS AREA

1. FREQUENCY

In the parametric equaliser mode, you can adjust the frequency range (20Hz -

20000Hz) by inputting numbers, rolling the mouse or using keyboard arrow keys.

In the graphic equaliser mode, the frequency is the 1/3 oct of the default value

assignment and will not show a specic value.

2. Q-VALUE

In the Parametric equaliser mode, you can adjust the Q value range

(0.404-28.82) by inputting the numbers, rolling the mouse or using the keyboard

arrow keys. In the graphic equaliser mode, the frequency is the 1/3 oct of the

default value assignment; and will not show a specic value.

SOFTWARE OPERATION INSTRUCTION

1. TYPE SETTING

Left-click the drop-down button

of the HPF and choose lter type

below:

CROSSOVER AREA - CONTINUED

A Butterworth

B Linkwitz-Riley

C Bessel

2. FREQUENCY SETTING

Input the numbers, roll the mouse or

use the keyboard arrow keys to set the

frequency adjustment range

A HPF Frequency 20HZ-20KHz

B LPF Frequency 20-20KHz

3. SLOPE SETTING

Left-Click the drop-down button of the HPF or LPF slope to choose the lter

slope there are 6dB/oct - 12dB/oct

ZDA4.6 Owners Manual

ZDA4.6 - DSP AMPLIFIER

SOFTWARE OPERATION INSTRUCTION

6. EQ MODE SWITCH BUTTON

This is a switch button for the parametric equaliser mode and the graphic

equaliser mode. Click this button and a dialogue box will appear. Click YES to

switch the EQ mode. The difference between graphic EQ mode and

parametric EQ mode as below:

A. GRAPHIC EQUALISER

Using the constant-Q technology,

set a fader that ensures the lter

frequency band never changes per

each frequency point, no matter the

boost or decay of the frequency.

Using the graphic equaliser structure

is much more simple and straight

forward and is commonly used in the

professional audio studios to get a lot

more ne composition.

B. PARAMETRIC EQUALISER

For further adjustment in detail for

various parameters including the

frequency band, frequency point,

gain Q-value etc, you can modify

the sound to make it brighter, richer

and more colourful to get the artistic

effect that you wanted.

3. GAIN

You can adjust the gain by putting the numbers in directly, using the keyboard

arrows keys. Range (-12dB~+12dB) or push the buttons directly.

4. START BUTTON

There are 10 buttons for the 10-BAND EQ. Each band has 1 button that you can

start this band accordingly.

5. RESET EQ BUTTON

Click this button and a dialogue box will appear. Click YES to reset all the

10-band (frequency, Q volume and gain volume reset to the preset, which is

distributed evenly according to the 1/3 oct)

EQ PARAMETERS - CONTINUED

Tabla de contenidos

Otros manuales de Amplificador de Phoenix Gold

Phoenix Gold

Phoenix Gold ZQ5004 Manual de usuario

Phoenix Gold

Phoenix Gold ZQ Series Manual de usuario

Phoenix Gold

Phoenix Gold XS6600 Manual de usuario

Phoenix Gold

Phoenix Gold SD800.5 Manual de usuario

Phoenix Gold

Phoenix Gold RSD500.4 Manual de usuario

Phoenix Gold

Phoenix Gold Z Series Manual de usuario

Phoenix Gold

Phoenix Gold ZR Series Manual de usuario

Phoenix Gold

Phoenix Gold R9.0:5 Octane-R Series Manual de usuario

Phoenix Gold

Phoenix Gold Titanium 1000.2 Manual de usuario

Phoenix Gold

Phoenix Gold S1000.1 Manual de usuario

Phoenix Gold

Phoenix Gold MX1260 Manual de usuario

Phoenix Gold

Phoenix Gold MX1230 Manual de usuario

Phoenix Gold

Phoenix Gold RX2 1000.1 Manual de usuario

Phoenix Gold

Phoenix Gold M25 series II Instrucciones de funcionamiento

Phoenix Gold

Phoenix Gold RX2 750.5 Manual de usuario

Phoenix Gold

Phoenix Gold R5.1 Mobile Theater Manual de usuario

Phoenix Gold

Phoenix Gold QX500.5 Manual de usuario

Phoenix Gold

Phoenix Gold XS2300 blk Manual de usuario

Phoenix Gold

Phoenix Gold ZX450 Manual de usuario

Phoenix Gold

Phoenix Gold QZ900.1d Manual de usuario

Phoenix Gold

Phoenix Gold SX400.1 Manual de usuario

Phoenix Gold

Phoenix Gold SD320.4 Manual de usuario

Phoenix Gold

Phoenix Gold Tantrum 300.2 Manual de usuario

Phoenix Gold

Phoenix Gold XS4300 Manual de usuario

Manuales populares de Amplificador de otras marcas

ASTRO

ASTRO HVO V40 P Manual de usuario

Marantz

Marantz SUPERSCOPE BLA-545 Instrucciones de montaje

NAD

NAD CI980 Manual de usuario

Technics

Technics SE-CH770 Manual de usuario

Harman Kardon

Harman Kardon HK6300 Manual de usuario

NAD

NAD T975 Manual de usuario

McIntosh

McIntosh MA6850 Manual de usuario

Electro-Harmonix

Electro-Harmonix ENGLISH MUFF’N Manual de usuario

Viatron

Viatron Autrix Manual de usuario

GME

GME GA9800 Manual de usuario

Atlas

Atlas CP700 Manual de usuario

Roland

Roland KC-1000 Manual de usuario

Pyle

Pyle PFMRA350BW Manual de usuario

Advantage

Advantage S-250 Manual de usuario

IRT Electronics

IRT Electronics DVA-3007 Manual de usuario

Dimavery

Dimavery BA-100 Series Manual de usuario

Sony

Sony XM-S400D Manual de usuario

Schertler

Schertler ROY X Manual de usuario