Phoenix Contact FL EP74 Series Manual de usuario

User manual

UM EN FL SWITCH EP74... HDWE

Hardware and installation for FL SWITC H

EP74…

2020-07-10

PHOENIX CONTACT GmbH & Co. KG • Flachsmarktstraße 8 • 32825 Blomberg • Germany

phoenixcontact.com

4083_en_A

Hardware and installation for FL SWITCH EP74…

This user manual is valid for:

Designation Version

FL SWITCH EP7428R-L3F1

FL SWITCH EP7428R-L3F1-C1

FL SWITCH EP7400-PS-LV

FL SWITCH EP7400-PS-MV

FL SWITCH EP7400-PS-HV

FL SWITCH EP7400-PS-LV-C1

FL SWITCH EP7400-PS-MV-C1

FL SWITCH EP7400-PS-HV-C1

FL SWITCH EP7400-M8GRJ45

FL SWITCH EP7400-M8GRJ45-C1

FL SWITCH EP7400-M8GSFP

FL SWITCH EP7400-M8GSFP-C1

FL SWITCH EP7400-M4GSFP

FL SWITCH EP7400-M4GSFP-C1

FL SWITCH EP7400-ABLK

User manual

UM EN FL SWITCH EP74... HDWE, Revision A

Table of contents

4083_en_A PHOENIX CONTACT 3/40

Table of contents

1 For your safety ............................................................................................................................5

1.1 Labeling of warning notes......................................................................................5

1.2 Qualification of users .............................................................................................5

1.3 Field of application of the product ..........................................................................5

1.3.1 Intended use ..........................................................................................5

1.3.2 Product changes ....................................................................................6

2 Overview and ordering data........................................................................................................7

2.1 Description ............................................................................................................7

2.2 Ordering data ........................................................................................................7

3Components ...............................................................................................................................9

3.1 Switch base ...........................................................................................................9

3.2 Port/line modules.................................................................................................11

3.3 Power supply modules.........................................................................................12

3.3.1 Status indicators ..................................................................................13

4Installation.................................................................................................................................15

4.1 Prevention of electrical discharge damage ..........................................................15

4.2 Unpacking ...........................................................................................................15

4.3 Electrical/mechanical hazards prevention ...........................................................16

4.4 Installation ...........................................................................................................17

4.4.1 Mounting the switch in a rack ...............................................................17

4.4.2 Power supply module installation .........................................................18

4.4.3 Port/line module installation .................................................................19

4.4.4 SD card ................................................................................................19

4.5 Connections ........................................................................................................20

4.5.1 AC power .............................................................................................20

4.5.2 DC power .............................................................................................21

4.5.3 Connecting the ground ........................................................................22

4.5.4 Alarm relay connections .......................................................................23

5Device management.................................................................................................................25

5.1 Serial console ...................................................................................................... 25

5.2 Ethernet ports and communication cabling..........................................................25

5.3 RJ45 Ethernet pinout ...........................................................................................26

5.4 Recommendations for cables in high electrical noise environments....................27

5.5 SFP......................................................................................................................27

FL SWITCH EP74…

4/40 PHOENIX CONTACT 4083_en_A

5.5.1 General fiber optic cable handling instructions .....................................27

5.5.2 SFP application considerations ............................................................28

ATechnical appendix...................................................................................................................29

A 1 Switch base ....................................................................................................... 29

A 2 Power supply modules ....................................................................................... 30

A 3 Port/line modules................................................................................................ 31

BAppendixes...............................................................................................................................35

B 1 List of figures ...................................................................................................... 35

B 2 List of tables ....................................................................................................... 37

For your safety

4083_en_A PHOENIX CONTACT 5/40

1 For your safety

Read this user manual carefully and keep it for future reference.

1.1 Labeling of warning notes

This symbol indicates hazards that could lead to personal injury.

There are three signal words indicating the severity of a potential injury.

DANGER

Indicates a hazard with a high risk level. If this hazardous situation is not

avoided, it will result in death or serious injury.

WARNING

Indicates a hazard with a medium risk level. If this hazardous situation is not

avoided, it could result in death or serious injury.

CAUTION

Indicates a hazard with a low risk level. If this hazardous situation is not avoided,

it could result in minor or moderate injury.

This symbol together with the NOTE signal word warns the reader of actions

that might cause property damage or a malfunction.

Here you will find additional information or detailed sources of information.

1.2 Qualification of users

The use of products described in this manual is intended for network technical support per-

sons or persons instructed by them who are responsible for installation, commissioning,

and maintenance of the device.

1.3 Field of application of the product

1.3.1 Intended use

This document provides users with the required specifications and installation guidelines for

the FL SWITCH EP74… switch. Hardware assembly, environmental conditions, wire con-

nections, and associated application factors are included.

Configuring the firmware for a switch to perform in a way it is not capable of will result

in no action.

FL SWITCH EP74…

6/40 PHOENIX CONTACT 4083_en_A

1.3.2 Product changes

Changes or modifications to hardware and software of the device are not permitted.

Incorrect operation or modifications to the device can endanger your safety or damage the

device. Do not repair the device yourself. If the device is defective, please contact

Phoenix Contact.

This document was created with content and permission of IS5 Communications, Inc.

Overview and ordering data

4083_en_A PHOENIX CONTACT 7/40

2 Overview and ordering data

2.1 Description

FL SWITCH EP74… advanced modular managed network switches provide an adaptable

platform to meet the electric power industries increasing requirements for scalable network

performance, uptime and security.

The modular 19-in. rack mount switch is hardened for areas heavily affected by EMI, such

as switchgear, transformer stations, and local substations. The switch works reliably under

extreme -40°C to +75°C/85°C environmental conditions and complies with the IEC 61850-

3 Ed 2, and IEEE 1613 specifications. The expandable “all Gigabit capable” architecture

combines cost effective answers for near term needs with upgrade paths for port quan-

tity/bandwidth and functions. A powerful Layer 2 and Layer 3 feature set with hardware-

based IEEE 1588 V2 PTP synchronization, based on the IEC61850-9-3 Utility Power Profile,

provides extensive options to meet changing performance and security needs.

The 28-port switch has four module slots. Three slots accept 10/100/1000 Mbps port mod-

ules (up to eight ports) for device connections, and a fourth slot supports a four-port SFP

module with 1 or 10 Gigabit up-link or device connections. SFP module options provide fur-

ther single point TX/fiber connection customization while allowing for electrically isolated

and secure communication lines between the control house and equipment throughout the

station.

Power is provided by redundant, modular power supplies. The modules are designed for

power source flexibility (AC/DC) and allow for hot-swappable replacement for uninterrupted

24/7 operation.

Power supply modules must be purchased separately.

2.2 Ordering data

Products

Description Type Order No. Pcs./Pkt.

61852 28-port modular rack switch - L2/L3, 128-bit encryp-

tion

FL SWITCH EP7428R-L3F1 1144353 1

61852 28-port modular rack switch - L2/L3, 128-bit encryp-

tion, conformal coated

FL SWITCH EP7428R-L3F1-

1216924 1

Power supply module, 24 V DC (10 … 36 V DC) FL SWITCH EP700-PS-LV 1144367 1

Power supply module, 48 V DC (36 … 72 V DC) FL SWITCH EP700-PS-MV 1144372 1

Power supply module, AC/DC (85 … 264 V AC/88 …

300 V DC)

FL SWITCH EP700-PS-HV 1144175 1

Power supply module, 24 V DC (10 … 36 V DC), conformal

coated

FL SWITCH EP700-PS-LV-

1216922 1

Power supply module, 48 V DC (36 … 72 V DC), conformal

coated

FL SWITCH EP700-PS-MV-

1216669 1

Power supply module, AC/DC (85 … 264 V AC/88 …

300 V DC), conformal coated

FL SWITCH EP700-PS-HV-

1216920 1

Port/line module, 8 RJ45 ports, 10/100/1000 Mbps FL SWITCH EP7400-

M8GRJ45

1144375 1

FL SWITCH EP74…

8/40 PHOENIX CONTACT 4083_en_A

Port/line module, 8 SFP slots, 100/1000 Mbps FL SWITCH EP7400-

M8GSFP

1144383 1

Port/line module, 4 SFP+ slots, 1/10 Gbps FL SWITCH EP7400-

M4TGSFP

1144388 1

Port/line module, 8 RJ45 ports, 10/100/1000 Mbps, confor-

mal coated

FL SWITCH EP7400-

M8GRJ45-C1

1216921 1

Port/line module, 8 SFP slots, 100/1000 Mbps, conformal

coated

FL SWITCH EP7400-

M8GSFP-C1

1216925 1

Port/line module, 4 SFP+ slots, 1/10 Gbps, conformal coated FL SWITCH EP7400-

M4TGSFP-C1

1216923 1

Accessories

Description Type Order No. Pcs./Pkt.

Slot cover FL SWITCH EP7400-ABLK 1144428 1

Redundancy module, Ethernet PRP, with 3 RJ45 ports FL RED 2003E PRP 2701863 1

Redundancy module, Ethernet PRP, with 1 RJ45 and 2 fiber

LC multimode ports

FL RED 2001E PRP2 LC 2701864 1

SFP module, RJ45, 100 Mbps/1Gbps FL SFP GT-H 1207198 1

SFP module, multimode fiber, 2 km, 1310 nm, LC, 100 Mbps FL SFP FX 2891081 1

SFP module, single mode fiber, 40 km, 1310 nm, LC,

100 Mbps

FL SFP FX SM 2891082 1

SFP module, multimode fiber, 1 km, 1310 nm, LC, 1 Gbps FL SFP SX 2891754 1

SFP module, single mode fiber, 30 km, 1310 nm, LC, 1 Gbps FL SFP LX 2891767 1

SFP module, multimode fiber, 300 m, 850 nm, LC, 10 Gbps FL SFP-10G-SR 1145046 1

SFP module, single mode fiber, 20 km, 1310 nm, LC,

10 Gbps

FL SFP-10G-ER20 1145203 1

Products

Description Type Order No. Pcs./Pkt.

Components

4083_en_A PHOENIX CONTACT 9/40

3 Components

3.1 Switch base

The switch base FL SWITCH EP74… installs in a standard 19-inch rack using 1U vertical

space with an additional unit (or 44 mm) of space required for cooling above and below the

switch.

CONSOLE

MGMT

PS2

PS1

RESET

SDCARD

PS1

ALARM

1LCD screen

2SD port cover

3SD port

4Management and console ports

5USB port

6Power status LEDs

7Alarm LED

8Power supply modules

Figure 3-1 FL SWITCH EP74… view from front

Heat generated by the switch is channeled outwards from the enclosure. For improved con-

vectional airflow, make sure there is at least one rack unit (1U) or 44 mm of space around

all sides of the device or between the devices on the rack.

Forced airflow is not required. However, any increase in airflow will result in a reduction of

ambient temperature and improve the long-term reliability of the equipment mounted in the

rack space.

The color LCD displays switch revision information and port status.

The SecureDigital (SD) port cover covers the following:

– SD card slot #1 (top) is for factory use and is disabled.

– SD card slot #2 (bottom) is available for storing up to 32 GB of Syslog event files.

– The management port, a 10/100 Base-T Ethernet port, that is used as an out-of-band

factory service port. It is disabled by default and not available for user access.

– Power status LEDs indicate the status of the installed power supply modules.

FL SWITCH EP74…

10/40 PHOENIX CONTACT 4083_en_A

USB port

The USB 2.0 port can be used with a USB memory stick to upgrade firmware, back up the

configuration files or transfer Syslog Files. Live access to the switch configuration and diag-

nostics is only provided through the console port or an Ethernet connection using one of the

28 ports. The USB port does not provide PC access to switch configuration and diagnostic

information.

The reset button in the power supply LED area restarts the switch if pressed for less than

2 s. If pressed for more than 2 s in conjunction with secure console commands restores the

switch to the factory default configuration and IP address.

LM2

LM1

LM4

LM3

1Terminal block

2Ground screw

3Port/line modules (4 shown)

4Port/line slots

Figure 3-2 FL SWITCH EP74… view from back

Terminal block

Used to wire to the power supplies, alarm contact, and future internal module options.

Port/Line modules 1-3

10/100/1000 Mbps slots accept up to eight port/line modules, typically for device connec-

tions. These slots also support IEE1588-based Precision Time Protocol (PTP) timing sig-

nals

Port/Line module 4

1 Gigabit/10 Gigabit slot accepts a four-port module, typically used for network trunk up-

links, but can also be used for added device connections This slot does NOT support IEEE

1588-based PTP signals.

The FL SWITCH EP7400-ABLK blank slot filler plate protects empty slots from envi-

ronmental contamination and unauthorized access to slot connectors. It may be in-

stalled over slots 1-4.

Este manual sirve para los siguientes modelos

Tabla de contenidos

Otros manuales de Cambiar de Phoenix Contact

Phoenix Contact

Phoenix Contact FL SWITCH SMN 6TX/2FX Guía de inicio rápido

Phoenix Contact

Phoenix Contact 1000T-8POE-GT-2SFP Guía de inicio rápido

Phoenix Contact

Phoenix Contact 1001T-4POE-GT-SFP Guía de inicio rápido

Phoenix Contact

Phoenix Contact IRT Series Manual de usuario

Phoenix Contact

Phoenix Contact FL SWITCH SMCS 8TX Guía de inicio rápido

Phoenix Contact

Phoenix Contact FL SWITCH EP74 Series Manual de instrucciones

Phoenix Contact

Phoenix Contact FL SWITCH 2005 Manual de usuario

Phoenix Contact

Phoenix Contact FL SWITCH SMCS 8TX Guía de inicio rápido

Phoenix Contact

Phoenix Contact FL SWITCH MM HS UM E Manual de usuario

Phoenix Contact

Phoenix Contact PSR-CT Series Manual de usuario

Phoenix Contact

Phoenix Contact FL SWITCH SMN 6TX/2POF-PN Manual de usuario

Phoenix Contact

Phoenix Contact FL SWITCH GHS 12G/8 Manual de usuario

Phoenix Contact

Phoenix Contact FL SWITCH SFN 5TX-24VAC Guía de inicio rápido

Phoenix Contact

Phoenix Contact FL SWITCH GHS 12G/8 Manual de usuario

Phoenix Contact

Phoenix Contact FL SWITCH SMCS 8TX Guía de inicio rápido

Phoenix Contact

Phoenix Contact 1001T-4POE Guía de inicio rápido

Phoenix Contact

Phoenix Contact IEC 61850 Manual de usuario

Phoenix Contact

Phoenix Contact FL SWITCH GHS 4G/12 Manual de usuario

Phoenix Contact

Phoenix Contact FL SWITCH SMCS 14TX/2FX Guía de inicio rápido

Phoenix Contact

Phoenix Contact FL SWITCH SFNT 5GT Guía de inicio rápido

Phoenix Contact

Phoenix Contact FL SWITCH 2206-2FX ST Guía de inicio rápido

Phoenix Contact

Phoenix Contact 1708 M12 POE Manual de usuario

Phoenix Contact

Phoenix Contact FL SWITCH SMCS 16TX Manual de usuario

Phoenix Contact

Phoenix Contact FL SWITCH SMCS 16TX Guía de inicio rápido

Manuales populares de Cambiar de otras marcas

URC

URC Total Control MFS-8 Manual de usuario

Azbil

Azbil HPQ-D11 Manual de usuario

Sony

Sony DFS-900M Manual de usuario

SICK

SICK i17S Manual de usuario

F&F

F&F SZR-277 Manual de usuario

Shure

Shure UAMS/BK Manual de usuario

Dräger

Dräger X-zone Switch Off Manual de usuario

Asco

Asco Joucomatic 349 Series Manual de usuario

BT Mini Hub Manual de usuario

D-Link

D-Link DES-1226G Manual de usuario

Johnson Controls

Johnson Controls FS80-C Manual de usuario

Alcatel-Lucent

Alcatel-Lucent 7450 ESS-12 Manual de usuario

MicroNet

MicroNet SP1200A Manual de usuario

Ruijie

Ruijie RG-PF2920 Series Manual de instalación y funcionamiento

Altinex

Altinex DA1914SX Manual de usuario

MiLAN

MiLAN MIL-SM2401M Manual de usuario

RJM

RJM MASTERMIND PBC/6X Manual de usuario

Atlas

Atlas MMK-KVM8 Manual de usuario