Philips 3000 series Manual de usuario
Service
Manual
3000 Series
XD3010/61
2
Contents
XD3010/61
Important repair instructions
•Only skilled personnel should carry out the repair.
•After repair the appliance should function properly.
•After repair the appliance has to meet the regulatory- and safety requirements that were applicable at the
time of release of the model.
•After repair the appliance always has to be tested for electrical safety according VDE 0701-0702 and for
medical products IEC 62353.
General information 3
Performance
Filtration
Usability
Nozzles and accessories
Sustainability
Weight and dimensions
Optional (accessories)
Technical information 4
Production date (or serial number)
Electrical diagram
Disassembly- and Reassembly advice 5
Disassembly
Reassembly
Service parts 8
Version history 15
3
Performance
•Input power (IEC) : 1800 W
•Input power (max) : 2000 W
•Sound power level : 83 dB
•Vacuum (max) : 26 kPa
Filtration
•Dust bag type : S-bag Classic Long
Performance
•Exhaust lter : Super Clean Air lter
•Motor lter : 1 layer foam lter
Usability
•Action radius : 9 m
•Carrying handle : Front
•Cord length : 6 m
•Tube coupling : ActiveLock
•Tube type : Metal 2-piece telescopic
tube
•Wheel type : Rubber
Nozzles and accessories
•Accessories included : Crevice tool, Integrated
brush
•Standard nozzle : ExtraClean nozzle
Sustainability
•User manual : 100% recycled paper
•Packaging : > 90% recycled materials
Weight and dimensions
•Dimensions of product : 400 x 282 x 251 mm
•Weight of product : 4.8 kg
Optional (accessories)
•Filter Replacement Kit HP :
3000 052 95741 CP1203/01
•Alma HF nozzle Con. 35 mm PH Deep Black
4322 004 26051 CP0189/01
•Turbo brush 35 mm Deep Black
4322 004 26231 CP0191/01
General information
5
Disassembly
•To remove the Exhaust lter (12):
Turn the appliance upside down, push the blue
button and remove the Exhaust grill (13), now
the Exhaust lter can be removed / replaced by
a new one. (see picture)
1
2
•Remove the dustcover assy (7) using a
screwdriver (see picture).
•To remove the Top housing:
Remove the 3 screws (B). (see picture)
B
B
B
•Turn the appliance upside down and remove
the 3 screws (C) on the bottom (underneath the
Exhaust grill). (see picture)
C C
C
C
•Lift the Top housing by using a screwdriver on
the backside, place it between Lower housing
and Top housing.
(Remark: buttons do not need to be removed).
•When you take o the upper housing you have
to be careful that the connector of the potmeter
is not disconnected. Remove the connection for
the potmeter then the housing can be removed.
Disassembly- and Reassembly advice
6
XD3010/61
•The panel can be removed by clicking hooks
using a screwdriver. Works the same as with the
predecessor.
Disassembly- and Reassembly advice
•To re-assemble the Top housing: make sure
that the sealing rim does not come below the
Top housing, it should be placed after the Top
housing is placed.
•Remove Cordwinder Lever.
•Remove Cordoutlet.
•Disconnect the 2 connectors from the PCB and
remove Cordwinder assy (26). (see picture)
•To remove the Motor housing:
Remove the 4 screws (E), for 2 of the screws an
extra long screwdriver is needed. (see picture)
E
E
E
E
7
Disassembly- and Reassembly advice
•Now the Motor housing can be removed by
lifting: Grip on back side with one hand, with
other hand push down in the Dust chamber.
•To replace the motor (37) and PCB (32):
The PCB is connected to the Motor with 2 wires
through the Motor housing.
Remove the Motor housing Cover by unclicking
the 3 clicks.
Watch out: Valve assy spring jumps out !
Remove the Motor rubber (38).
Pull the motor to the outside and remove the 2
wires Xand Yconnected to the PCB.
Now the motor and PCB can be replaced.
(see exploded view)
Reassembly
•The Motor rubber needs to be replaced correctly,
safety valve can be replaced and afterwards the
Motor housing cover can be clicked on.
•Replace Motorassy in the Lower housing.
•Fix all the screws (E).
•Replace the Cordwinder assy and reconnect de
2 wires to the PCB on the Motor housing.
•First leed the cord through the Cord outlet, then
the Cordwinder assy can be replaced.
•Keep the cable and plug in its original position!!!
•Replace the Top housing and x all the screws
(B) and (C).
•Now the Dustcover assy can be replaced by
using a screwdriver.
• Remark: Safety valve cannot be supplied
separately, make sure that this can be re-used.
8
2
1
5
4
XD3010/61
Pos Service code Description Remark CRP
1 3000 053 22101 Hose assy Zeta
2 4322 004 26244 2-Piece TT tube Active lock CP0187/01
4 4322 004 26224 Multi-purpose Active lock 35 mm Deep Black
5 4322 004 26201 Crevice tool 35 mm Deep Black CP0188/01
50* 3000 052 95741 Filter Replacement Kit HP Not shown CP1203/01
* Consisting of 2 lters and a dust bag
Service parts
Otros manuales para 3000 series
64
Este manual sirve para los siguientes modelos
1
Tabla de contenidos
Otros manuales de Aspiradora de Philips
Philips
Philips FC6144 Manual de usuario
Philips
Philips FC8972 Manual de usuario
Philips
Philips FC9353 Manual de usuario
Philips
Philips HomeRun Aqua 7000 Series Manual de usuario
Philips
Philips HR 8569 Manual de usuario
Philips
Philips FC6049/01 Manual de usuario
Philips
Philips FC8451 Manual de usuario
Philips
Philips HR6835 Manual de usuario
Philips
Philips FC8740 Manual de usuario
Philips
Philips FC8140 Manual de usuario
Philips
Philips 6000 Series Manual de usuario
Philips
Philips AquaTrio Pro FC7090 Manual de usuario
Philips
Philips FC8455/01 Manual de usuario
Philips
Philips FC8600 Manual de usuario
Philips
Philips FC8740 Manual de usuario
Philips
Philips FC8780/08 Manual de usuario
Philips
Philips SmartPro Active Manual de usuario
Philips
Philips SilentStar FC9306 Manual de usuario
Philips
Philips FC9170/07 Manual de usuario
Philips
Philips HomeRun FC9910 Manual de usuario
