Philips Intelligent remote control Manual de usuario

user guide

Intelligent Remote Control User Guide

The information in this manual is copyright-protected. No part of this manual may be copied or

reproduced in any form without prior written consent from Philips Electronics Corporation.

PHILIPS ELECTRONICS CORPORATION SHALL NOT BE LIABLE FOR OMISSIONS OR

FOR TECHNICAL OR EDITORIAL ERRORS CONTAINED IN THIS MANUAL. PHILIPS

ELECTRONICS CORPORATION SHALL NOT BE HELD LIABLE FOR INCIDENTAL OR

CONSEQUENTIAL DAMAGES RESULTING FROM THE SUPPLYING OR USE OF THIS

INFORMATION. PHILIPS ELECTRONICS CORPORATION SHALL NOT BE HELD LIABLE

FOR INCIDENTAL OR CONSEQUENTIAL DAMAGES RESULTING FROM THE

PERFORMANCE OR USE OF THE MATERIALS DESCRIBED IN THIS MANUAL.

The information in this manual may be subject to change without prior notice.

All other brand or product names are trademarks or registered trademarks of their respective companies

or organizations.

FCC NOTICE: This equipment has been tested and found to comply with the limits for a Class B

digital device, pursuant to part 15 of the FCC Rule. These limits are designed to provide reasonable

protection against harmful interference in residential installation. This equipment generates, uses, and

can radiate radio frequency energy and, if not installed and used in accordance with the instructions,

may cause harmful interference to radio communications. However, there is no guarantee that

interference will not occur in a particular installation. If this equipment does cause harmful interference

to radio or television reception, which can be determined by turning the equipment off and on, the

user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna

• Increase the separation between the equipment and receiver

• Connect the equipment into an outlet on a different circuit from the receiver.

Consult the dealer or an experienced radio/TV technician for help.

NOTE: If serial or parallel ports are configured, a filtered/shielded serial or parallel cable is

recommended to minimize EMI and ensure FCC B compliance.

User Guide

Intelligent Remote Control

customizable/programmable, touch screen

universal remote control

Insert batteries

Insert 4 AA batteries according to the picture

on the inside of the battery compartment.

Use the rechargeable battery pack included

with the dock. (Remove the AA battery tray

first). Before using the remote control, be sure

to charge the battery completely according to

the instructions in the manual.

Touch the screen to start

To turn on the screen, tap it gently with your finger.

To use the touchscreen, simply tap the images you

see on the screen.

There's no need to turn the screen off–it shuts off

automatically to save power.

Operate your components

Fresh out of the box, the remote control is set up to work with popular components

made by Philips, Marantz and certain other companies. If someone has programmed

the remote control for you, it will operate all your components. If not, you need to

teach it.Teaching the remote control is easy:Add components to the Device menu, if

necessary. Then, teach the remote control the commands for the components. For

instructions, refer to the manual.

Be sure to read the manual for

important information about care and

use of the touchscreen

Battery compartment lid slides off

quickstart

Home

If you get lost, you

can always go Home.

Just tap

Tap name of

component

to display

component’s

control panels

You can also use the

Device menu; tap

here to display it.

Tap to scroll to

next panel for this

component.

Learning eye

(bottom of remote control)

For learning commands from

other remote controls

Sending eye

(IR transmitter)

Send commands to devices

Home

Easy access to all

components

Macro menu

Execute stored lists

of commands

Control panel

Tap buttons to send

commands to

components

Panel number

Shows what panel

you’re onl l

Left and Right buttons

Activate the commands

shown immediately

above the buttons

Modes

Normal use controlling components.

Learn commands from other remote controls.When a macro panel

is displayed, this button changes to for recording macros.

Assign letters and symbols to buttons and commands.

Add a new component or group of macros.

Delete a button, component, macro, or macro group.

Change the order of commands in a menu.

quickreference

The remote control icon

Press and hold for 3

seconds to go to Setup

Scroll button

Display previous

control panel

Device menu

Open a component’s

control panels

Mode menu

Customize the remote

control (see below)

Scroll button

Display next control

panel. Scroll buttons

may appear on left

Contents

Welcome 7

Features 8

The intelligent remote control 8

Recharging dock 8

1 Batteries 9

Installing AA batteries 9

Using the recharging dock 11

2 Using the remote control 14

Buttons and controls 14

Direct-access buttons 15

Left and Right buttons 15

Touchscreen buttons 15

Getting started 16

To turn the display on 16

To adjust the display 17

To turn on the backlight 17

Using the remote control to control your equipment 18

Home 18

Device menu 19

Control panels 21

Use mode 22

To switch devices without affecting the source 23

3 Customizing the intelligent remote control 25

To customize the remote control 25

Understanding modes 28

To switch modes 29

To show or hide the Mode menu 29

Learning commands from other remote controls

(Learn mode) 30

To program a button on the display (soft button) 31

To program an item on the Device menu 34

To program a template button 36

Programming the direct-access and Left/Right buttons 37

To program a button globally 37

To program a direct-access button on a per-device basis 38

Adding devices to your system (Add mode) 39

To add a device 39

Relabeling buttons and menu items (Label mode) 41

To relabel a button 41

To relabel an item on a menu 43

Rearranging items in menus (Move mode) 44

To rearrange the items in a menu 44

Deleting buttons and menu items (Delete mode) 46

To delete a button or button action 46

To delete a device, Device menu action, or macro group 47

4 Creating Macros 50

Recording macros 52

To record a macro 52

To view the commands in a macro 57

Editing macros 57

To edit a previously recorded macro 57

Organizing macros into groups 59

To add a macro group 59

Using macros 61

To execute a macro 61

To stop a macro 61

5 Settings 62

To adjust settings 62

To exit Setup 65

6 Troubleshooting 66

Problems using the remote control 66

Problems using the recharging dock 69

Common questions 70

Additional procedures 71

To reset the remote control 71

To revert to the original conﬁguration 72

To calibrate the touchscreen 72

Service and support 73

7 Specifications 74

8 Command Reference 75

Welcome

Congratulations on purchasing the intelligent remote control. The remote

control is a universal learning remote control that combines ﬂexibility with ease

of use through an LCD touchscreen and an intuitive user interface.

COMPLETE CUSTOMIZATION

You decide how you want the remote control to look. You can add and remove

devices and functions. You can relabel buttons using the remote control’s

unique virtual keyboard. You can record all the macros you need, and edit them

on-screen. The remote control is as individual as you are.

TOTAL CONTROL

While other universal remotes conﬁne you to a predeﬁned list of devices, the

remote control lets you add, delete, reorganize, and even relabel new devices, so

it grows with your system. It can learn to control any device that understands

infrared signals, from your TV to your remote-control curtains. The built-in

device templates make it easy to add and program all kinds of devices.

SIMPLICITY AND DEPTH

The remote control’s elegant interface is simple enough for the entire family to

use. Yet it has the power and ﬂexibility to satisfy any home entertainment or

home control enthusiast.

The remote control and

recharging dock

Welcome

Features

The intelligent remote control

• Large dynamic touchscreen with liquid crystal display.

• Direct-access buttons for frequently used functions.

• Elegant, intuitive interface with animation (patent pending).

• Automatic backlighting for visibility in the dark.

• Built-in, customizable device templates for total control.

• Programmable, editable macros (patent pending).

• Virtual keyboard for labeling buttons and devices (patent pending).

• Can control any device that receives infrared remote control signals.

• Learns infrared (IR) codes from your existing remote controls—then replaces

those remotes.

• Comes with hundreds of built-in commands (RC-5/6) for out-of-the-box use

with your Philips and Marantz components.

• Designed for one- or two-handed operation, or tabletop use.

• Flash memory stores your commands even when batteries aren’t present.

Recharging dock

• Easy, unlimited recharging—no need to remove the battery.

• The remote control can be used while it’s on the dock,

even if the battery is low.

• NiMH rechargeable battery pack minimizes loss of battery life over time.

• Rechargeable battery pack is easier on the environment than ordinary

batteries that need replacing.

• Indicator light tells you when the remote control is charging.

PC serial cable

• To connect the remote control with your computer.

• Allows you to customize the graphical user interface through PC software.

Este manual sirve para los siguientes modelos

Tabla de contenidos

Otros manuales de Control remoto universal de Philips

Philips

Philips SBC RU 220 Manual de usuario

Philips

Philips SRP2008B/86 Manual de usuario

Philips

Philips Perfect replacement SRP5107WM/17 Manual de usuario

Philips

Philips SRP4004 Manual de usuario

Philips

Philips Icon SRU4106 Manual de usuario

Philips

Philips RFX2001 Manual de usuario

Philips

Philips Pronto SBCRU940 Manual de usuario

Philips

Philips SRU9400/10 Manual de usuario

Philips

Philips PERFECT SRP3004 Manual de usuario

Philips

Philips SRM7500 Manual de usuario

Philips

Philips SRU4040 Manual de usuario

Philips

Philips Magnavox PM3 Manual de usuario

Philips

Philips Prestigo SRT9320/27 Manual de usuario

Philips

Philips SBCRU254/00H Manual de usuario

Philips

Philips SRU4007 Manual de usuario

Philips

Philips Prestigo SRU6008 Manual de usuario

Philips

Philips SRU2040 Manual de usuario

Philips

Philips SRP4004 Manual de usuario

Philips

Philips Perfect replacement SRP1003/27 Manual de usuario

Philips

Philips Universal SBC RU 151 Manual de usuario

Philips

Philips SBC RU760 Manual de usuario

Philips

Philips SRU 5170 Manual de usuario

Philips

Philips SBC RP 421 Manual de usuario

Philips

Philips PERFECT SRP3004 Manual de usuario

Manuales populares de Control remoto universal de otras marcas

Pronto

Pronto Peel Manual de usuario

GE 24929 Manual de usuario

Radio Shack

Radio Shack Wireless Remote Control System Manual de usuario

AUVIO

AUVIO Universal Home Theater Remote Manual de usuario

THOMSON

THOMSON ROC4309 Manual de usuario

GE RM94931 Manual de usuario

RCA

RCA RCU600WMS - Universal Remote Control Manual de usuario

Blackweb

Blackweb BWB17AV002 Manual de usuario

Marmitek

Marmitek DoorGuard 300 Manual de usuario

Chunghop

Chunghop RM-L618 Manual de usuario

GE RM24965 Manual de usuario

Anderic

Anderic KTN828 Manual de usuario

Sunwave Tech.

Sunwave Tech. Touch Screen Remote Control Manual de usuario

Medion

Medion E74023 Manual de usuario

intensity

intensity RM02A Manual de usuario

GE RM24950 Manual de usuario

Sky

Sky MY Manual de usuario

RCA

RCA RCU600M - Universal Remote Control Manual de usuario

Philips intelligent remote control Manual de usuario

Manuales populares de Control remoto universal de otras marcas