Philips FM01FD10B/00 Manual de usuario

EN Executive edition Click here 2

FR Executive edition Cliquez ici X

DE Executive edition Hier klicken X

ES Executive edition Haga clic aquí X

NL Executive edition Hier clicken X

IT Executive edition Fare clic qui X

PR Executive edition Clique aqui X

RU Executive edition

ôÂÎÍÌËÚÂ Á‰ÂÒ¸

FMXXFD10B/00

www.philips.com/welcome USB Flash Drive

1 Important

Note:

This equipment has been tested and found to comply with the limits

for a Class B digital device, pursuant to part 15 of the FCC Rules.

These limits are designed to provide reasonable protection against

harmful interference in a residential installation.

This equipment generates, uses and can radiate radio frequency energy

and, if not installed and used in accordance with the instructions, may

cause harmful interference to radio communications. However, there is

no guarantee that interference will not occur in a particular

installation. If this equipment does cause harmful interference to radio

or television reception, which can be determined by turning the

equipment off and on, the user is encouraged to try to correct the

interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.

• Increase the separation between the equipment and receiver.

• Connect the equipment into an outlet on a circuit different from

that to which the receiver is connected.

• onsult the dealer or an experienced radio/TV technician for help.

The shielded interface cable and connectors must be used in order to

comply with the limits for digital device pursuant to subpart B of Part

15 of FCC Rules.

Electric-, Magnetic- and Electromagnetic Fields (EMF)

Philips Royal Electronics manufactures and sells many products

targeted at consumers, which, like any electronic apparatus, in

general have the ability to emit and receive electro magnetic

signals.

One of Philips’ leading Business Principles is to take all necessary

health and safety measures for our products, to comply with all

applicable legal requirements and to stay well within the EMF

standards applicable at the time of producing products.

Philips is committed to develop, produce and market products that

cause no adverse health effects.

Philips confirms that if its products are handled properly for their

intended use, they are safe to use according to scientific evidence

available today.

Philips plays an active role in the development of international EMF

and safety standards, enabling Philips to anticipate further

developments in standardization for early integration in its

products.

Note: Keep this detailed user manual for future reference.

Warning

• To prevent fire or shock hazard, do not expose the unit to rain or

moisture.

• To avoid electric shock, do not open the cabinet. Refer servicing to

qualified personal only.

• Keep away from children. If swallowed, promptly see a doctor.

ENGLISH

Note

Data is safe in the following environments: In X-ray security systems at

airports and in magnetic fields with strengths not exeeding 3,500 Oe.

For customers in the U.S.A.

Changes or modifications made to this equipment not expressly

approved by company may void the FCC authorization to operate this

equipment.

Operation is subject to the following two conditions:

this device my not cause harmful interference, and

this device must accept any interference received, including

interference that may cause undesired operation.

Caution

You are cautioned that any changes or modifications not expressly

approved in this manual could void your authority to operate this

equipment.

For customers in Canada

This Class B digital apparatus complies with Canadian ICES-003.

This device complies with Part 15 of the FCC Rules and with RSS-210

of Industry Canada.

For customers in Europe

This product conforms to the following European Directives:

89/336/EEC, 2006/95/EEC (safety directive) and 93/68/ECC (EC

Marking Directive).This product complies with EN55022 Class B and

EN55024 for use in the following areas; residential, commercial, and

light-industrial.

Notes on Use

•The USB flash drive may not function correctly if it is connected to

the computer when the computer is started up, restarted, or

restored from sleep mode.Always disconnect the USB flash drive

from the computer before performing any of these operations.

• Do not place the drive in locations that are:

– extremely hot or cold;

– vibrating;

– exposed to corrosive gases;

– dusty or dirty;

– very humid;

– exposed to direct sunlight.

• Microsoft andWindows are registered trademarks of Microsoft

Corporation in the United States and other countries.

• Mac and Macintosh are trademarks of Apple Computer, Inc.,

registered in the U.S. and other countries.

• Other system names and product names that appear in this manual

are registered trademarks or trademarks of their respective

owners. Note that the ™ and ®symbols are not used in this

manual.

• Power consumption in standby mode: < 100 mA.

•To help maintain the luster and beauty of your Active Crystals piece

of time, carefully polish the product with soft, lint-free cloth.

Avoid contact with harsh cleansers.

• The Company cannot accept any liability for financial damages, lost

profits, claims from third parties, etc., arising from the use of the

software provided with this unit.

• The software specifications may be subject to change without

notice.

• For detailed warranty instructions, please refer to the printed

certificate booklet.

ENGLISH

• Our product warranty is limited only to the USB flash drive itself,

when used normally in accordance with these operating instructions

and with the accessories that were included with this unit in the

specified or recommended system environment. Services provided

by the Company, such as user support, are also subject to these

restrictions.

• The Company cannot accept liability for damage or loss resulting

from the use of this unit, or for any claim from a third party.

• The Company cannot accept any liability for: problems with your

computer or other hardware arising from the use of this product;

the suitability of this product for specific hardware, software, or

peripherals; operating conflicts with other installed software; data

loss; or other accidental or unavoidable damage.

• The Company cannot accept any liability for financial damages, lost

profits, claims from third parties, etc., arising from the use of the

software provided with this unit.

• The software specifications may be subject to change without

notice.

Environmental information

Disposal of your old product

Your product is designed and manufactured with high quality materials

and components, which can be recycled and reused.

When this crossed-out wheeled bin symbol is attached to a product it

means the product is covered by the European Directive 2002/96/EC.

Please inform yourself about the local separate collection system for

electrical and electronic products. Please act according to your local

rules and do not dispose of your old products with your normal

household waste.The correct disposal of your old product will help

prevent potential negative consequences for the environment and

human health.

The making of unauthorized copies of copy-protected material,

including computer programmes, files, broadcasts and sound

recordings, may be an infringement of copyrights and constitute a

criminal offence. 186

This equipment should not be used for such purposes.

ENGLISH

2 Your USB flash drive

Congratulations on your purchase and welcome to Philips!

To fully benefit from the support that Philips offers, register your

product at www.philips.com/welcome.

3 Install

Microsoft®Windows Vista, XP, 2000, ME, MAC OS 9.0 or

higher:

• The device driver is installed automatically when the drive is

connected to a USB port of the computer. However, with some USB

2.0 cards or boards, you may need to initiate installation manually. In

this case, follow the on-screen instructions to search for a suitable

driver. Refer to the operating system's Help file if you need any

help.

Note

Do not remove USB flash drive from the computer USB port as long

as the download process is in progress. Be sure that the write

protection switch (fig. 2) is in the unprotected (left) position

during installation.

Windows 98/98SE:

Download the device driver at

http://www.philips.com/storage.

Remove the protective cap from the USB connector and turn

it backwards (fig. 1).

Insert the flash drive USB connector into one of the computer’s

USB ports (fig. 2).

> The New Hardware wizard starts and the drive’s LED lights up.

The light intensity of the LED will gradually increase and then

diminish again.This will continue for as long as the drive is

connected to the computer.

Click the Next button.

ENGLISH

②

①

Click Search for the best driver for your device.Then click

the Next button.

Click Specify a location.Then click the Browse button.

When the dialog box appears, specify the folder where the

installation program is stored.

Click the OK button to close the dialog box.Then click the

Next button.

Click the Next button.

Click the Finish button.

> Installation of the driver starts.

> Once the installation process is complete, a drive icon for the

USB flash drive appears in the My Computer window.

After confirming that the drive is in standby mode you can remove

the drive from the computer’s

USB port.

Note

Do not remove the drive from the computer USB port as long as

the download process is in progress. Be sure that the write protection

switch (fig. 2) is in the unprotected (left) position

during installation.

4 Connect

Connecting the USB flash drive to your computer

Note

If the USB port of your computer is not easily accessible,You can use a

USB extension cable or an optional USB hub to connect the USB flash

drive to your computer.

Remove the protective cap from the USB connector and turn

it backwards (fig. 1).

ENGLISH

②

①

Insert the USB flash drive’s USB connector into one of the

computer’s USB ports (fig. 2).

> The USB flash drive’s LED lights up.The light intensity of the

LED will gradually increase and then diminish again.This will

continue for as long as the drive is connected to the computer.

5 Enjoy

Operating the USB flash drive

• Once the USB flash drive is connected to the USB port of the

computer:

– a software package will automatically start up enabling you to

activate various applications. See the software help file for futher

instructions.

Visit our website www.philips.com/storage for software related

questions and software updates.

– the drive icon for the USB flash drive will appear.You can now

copy and save data on the drive by dragging files and folders on

the drive icon, just like when you copy data to a hard disk,

CD-ROM, DVD or floppy disk.

> When copying data the LED’s light intensity will quickly

increase and diminish.

Windows ReadyBoost

Windows ReadyBoost is a Microsoft WindowsVista™feature that

expands memory size for your Windows Operating system and

improves the performance of your computer by utilizing the capacity

of an unused flash memory device, such as a USB flash drive.

The Flash memory serves as an additional memory cache.This is a

memory area where frequently accessed data can be stored for rapid

access.

ENGLISH

To be able to use Windows ReadyBoost your computer must have:

– WindowsVista™installed;

– a USB 2.0 port;

– access to a flash memory device with at least 1GB available storage.

Using Windows ReadyBoost

• Insert the flash drive USB connector into one of the computer’s

USB ports (fig. 2).

> WindowsVista now checks to see if the flash drive’s

performance is fast enough to work with Windows ReadyBoost.

If so, you are asked if you want to use the flash drive to speed up

system performance: the WindowsVista AutoPlay dialog box will

offer the option of using the device for ReadyBoost.

• You can choose to allocate part of the flash drive’s memory to

speed up performance and use the remainder to store files.

Once a flash drive has been assigned as the ReadyBoost flash drive

you can no longer use it to save files, play music or retrieve video

and pictures.

Notes

• Do not remove the USB flash drive from the computer USB port

while copying and saving data otherwise the drive will no longer be

recognized by your system.

• When operating under Windows the drive name varies, depending

on yourWindows version.

Disconnecting the USB flash drive from your computer

Windows®98/98SE

• After confirming that the USB flash drive is in standby mode you can

remove the flash drive from the computer’s USB port.

Windows®ME and Windows®2000

Double-click the Unplug or eject hardware icon in the task bar

in the lower right part of the screen.

In the window that appears, select the name of the device that is to

be removed, then click the STOP button.

When the Stop a hardware device screen appears, make sure

the correct information is displayed, then click the OK button.

When a message appears, indicating that the USB flash drive can be

safely removed, remove the USB flash drive from the computer’s

USB port.

Windows®Vista, XP

Double-click the Safely Remove Hardware icon in the task bar

in the lower right part of the screen.

In the window that appears, select the name of the device that is

to be removed, then click the STOP button.

When the Stop a hardware device screen appears, make sure

the correct information is displayed, then click the OK button.

When the message Safe to Remove Hardware appears, remove

the the USB flash drive from the computer’s USB port.

FRANÇAIS

Mac OS 9.0 and higher

Drag the drive icon to the Trash.

After confirming that the the USB flash drive is in standby mode,

remove the the USB flash drive from the computer’s USB port.

6 Technical specifications

Interface

• High-Speed USB 2.0 (backwards compatible with USB 1.1)

Transfer rate

•Read: max. 25MB per second / Write: max. 15MB per second (High-

speed USB 2.0 port required to achieve maximum speed)

Compatible OSs

• Microsoft® Windows®Vista, XP, 2000, ME and 98SE (with driver)

• Mac OS 9.0 or later

• Linux 2.4.0 or later

7 Need help?

Online help: www.philips.com/support

For interactive help and frequently asked questions.

For software updates and support: www.philips.com/storage.

ENGLISH

without the prior written consent of the copyright owner.

The information presented in this document does not form part of any

quotation or contract,is believed to be accurate and reliable and may

be changed without notice. No liability will be accepted by the

publisher for any consequence of its use. Publication there of does not

convey nor imply any license under patent- or other industrial or

intellectual property rights.

3222 xxx xxxx

June 2007

www.philips.com NMW/RR/RD/2507

Este manual sirve para los siguientes modelos

Tabla de contenidos

Otros manuales de Almacenamiento de Philips

Philips

Philips FM24SS130B/00 Manual de usuario

Philips

Philips Swarovski FM01SW21/27 Manual de usuario

Philips

Philips SPE3031CC/00 Manual de usuario

Philips

Philips DVDRW620 Manual de usuario

Philips

Philips HEART WARE FM01SW20 Manual de usuario

Philips

Philips FM FD35B Series Manual de usuario

Philips

Philips FMXXFD02B/00 Manual de usuario

Philips

Philips SPE3071CC/05 Manual de usuario

Philips

Philips SPD8025CC/05 Manual de usuario

Philips

Philips Lock In FM01SW60 Manual de usuario

Philips

Philips SPD5110CC Manual de usuario

Philips

Philips Swarovski FM01SW40/00 Manual de usuario

Philips

Philips Swarovski FM01SW21/00 Manual de usuario

Philips

Philips SPE3091CC Manual de usuario

Philips

Philips FM51FD10B/00 Manual de usuario

Philips

Philips ED52CDRWK Manual de usuario

Philips

Philips SPE2015CC/10 Manual de usuario

Philips

Philips SPE9030CC/05 Manual de usuario

Philips

Philips SPE2015CC/10 Manual de usuario

Philips

Philips SPE9020CC Manual de usuario

Philips

Philips FM02SW10 Manual de usuario

Philips

Philips CD740RW Manual de usuario

Philips

Philips HEART BEAT FM01SW40 Manual de usuario

Philips

Philips Computer Drive Manual de usuario

Manuales populares de Almacenamiento de otras marcas

QNAP

QNAP TS 32PXU Series Manual de usuario

LaCie

LaCie RUGGED RAID Manual de usuario

Freecom

Freecom CLS DOCK Manual de usuario

PNY

PNY Attache P-FD64MBATT3 Manual de usuario

HP StorageWorks MSL2024 Manual de usuario

OLT

OLT 6x6 Maximizer Manual de usuario

Transcend

Transcend JetFlash 160 Manual de usuario

LaCie

LaCie RUGGED MINI Manual de usuario

Thunderbolt

Thunderbolt 600 Manual de usuario

Panasonic

Panasonic LB-DH8 series Manual

Intel

Intel RAID High Availability Manual de usuario

LaCie

LaCie 12big Thunderbolt 3 Manual de usuario

Spectra Logic

Spectra Logic T-Series Spectra T50e Manual de usuario

Panasonic

Panasonic LKM-F931-1 Manual de usuario

Tabernus

Tabernus Enterprise Erase E2400 Manual de usuario

Rocstor

Rocstor COMMANDER 3F series Manual de usuario

HP P9000 Manual de usuario

Western Digital

Western Digital Ultrastar Data60 Manual de usuario