Philips NT3000/49 Guía de instalación

Philips Norelco Nosetrimmer 3000 Nose, ear & eyebrow trimmer, Series 3000

NT3000/49

Frequently Asked Questions

Click on a question to go directly to the answer:

1. Can I rinse my Philips Groomer with water?

2. Where is the model and serial number of my Philips Male Groomer?

3. What do the symbols on my Philips Groomer mean?

4. How do I use my Philips Nose Trimmer?

5. How do I charge my Philips Groomer?

1. Can I rinse my Philips Groomer with water?

You can rinse your Philips Groomer or Trimmer only if it is waterproof. You can check that by looking

at the signs and symbols printed on your groomer's box or body.

Crossed out tap symbol

If you see a crossed out tap symbol on the box or body of your groomer, it means that the groomer is

not washable and should be cleaned without water.

Tap symbol

A tap symbol printed on your grooming device indicates that it is washable and its parts (cutters and

combs) can be cleaned with water. However, this does not mean that you can use it to clip or trim

your hair in the shower or bath.

Bath or shower symbol

If you see a shower or bath symbol printed on your groomer, it means that your device is waterproof.

It can be safely cleaned with water and used while taking a shower or a bath. For safety reasons,

these waterproof groomers can only be used cordless and will not turn on if they are connected to

the power supply.

Note: Please keep in mind that the symbols on your Philips Groomer vary per model type. If you are

still unsure whether it is safe to clean your Philips Groomer with water then please contact us for

further support.

2. Where is the model and serial number of my Philips Male Groomer?

If you own a Philips Trimmer or Hair Clipper and want to know where its model and serial number is

located, please check the information below.

The model number is often needed when registering your product or when looking for information

about your specific model. The serial number can be used to identify the production date of your

product.

Back of the device

For some grooming devices like the OneBlade, the model and serial numbers are located on the back

of the handle. The model number usually starts with 2 alphabets followed by 4 digits, e.g. QP2540.

The serial number has the format of YYWW (Year and week).

Top of the device

Some hair clippers and beard trimmers have the model number located on the top of the device, just

below the cutting teeth. The serial number is usually located under the cutting unit. Try pulling off

the upper part of your groomer and see if you can find 4 digits in the format of YYWW in there, e.g.

1823.

Inside the handle

For nose trimmers the model and serial number is located inside the battery compartment. Remove

the lower part of the handle of your trimmer to see the battery compartment. The model and serial

number will be printed over there.

3. What do the symbols on my Philips Groomer mean?

If you are wondering, what do the lights and symbols on your Philips Male Grooming device mean,

then please read our answer below.

Charging indications

Most Philips Hair Clippers and Trimmers have charging indications and lights on them to indicate

when your device needs to be charged and is fully charged. Depending on the device you own the

charging indications may be displayed in many different ways, as shown in the image below.

Some grooming devices do not have any charging indication on them. In that case, check the

product's charger to see if has a light on it. This light lights up when the charger is connected to the

power supply. For these products, follow the advised charging time as instructed in the user manual.

Travel lock

Some grooming devices come with a travel lock functionality to prevent your groomer from turning

on by accident while travelling.

To activate the travel lock press and hold the on/off button for 3 seconds. The lock symbol will flash

briefly to indicate that the device is locked now. If you try to switch it on it will not work, rather the

travel lock symbol will flash to remind you to deactivate it.

To deactivate the travel lock you can again press and hold the power button for 3 seconds. The

symbol will again flash briefly and then the groomer will turn on.

Turbo mode

Some Philips Hair Clippers and Multigroomers are equipped with a Turbo Mode. This is usually

indicated with a T shaped symbol on the clipper. Press this button when you need extra power from

your clipper. This can be useful when you are trimming very thick hair.

Quiet mode

Some Philips Hair Clippers have the symbol of a baby printed on them. This is the quiet mode, which

you can use while trimming your child’s hair. This reduces the noise coming from the machine and

helps keep children calm while clipping their hair.

Oil reminder

If you see the image of an oil drop flashing on your grooming device, this is a reminder for you to oil

your groomer. You should regularly clean and oil your groomers with the oil provided in the package

or sewing machine oil.

Depending on the grooming device you own, you may find other symbols printed or flashing on it.

For more information regarding your exact model please refer to the user manual or contact us.

4. How do I use my Philips Nose Trimmer?

The Philips Nose Trimmer is a multifunctional device, which can be used to trim different areas of

your face with its attachments. Watch this video to see how to use this trimmer. For detailed

instructions see the sections below.

Nose and ear trimming

For this device, the same cutting unit can be used to trim both your nose and ear hair.

Before trimming, make sure your device is clean and your nose and ear are free from any mucus or

wax.

Trimming nose hair

1. Turn the device on and insert the cutting element inside your nose. Do not insert the trimming

head more than 5 mm into your nostrils.

2. Slowly move the trimming head around inside each nostril. Make sure that the side with the

trimming teeth touches the hair.

3. Clean thoroughly after each use.

Trimming ear hair

1. Turn the device on and slowly move the trimming head along the rim of the ear to remove any hair

that stick out. Make sure that the side with the trimming teeth touches the hair.

2. Carefully insert the trimming head into the outer ear channel. Do not insert the trimming head

more than 5 mm into your ear channel.

3. Turn the trimming head around to remove all unwanted hair from your outer ear channel.

4. Clean thoroughly after each use.

Eyebrow trimming attachment

1. Comb your eyebrows in the direction of hair growth.

2. Make sure the product is switched off. Slide the eyebrow comb onto the trimming head. The short

eyebrow comb trims the hair to a length of 3 mm. The long comb can trim the hair to a length of

5mm.

3. Switch on your device.

4. Move the comb over the eyebrow from the outer tip of the eyebrow towards the base of the nose

(against the direction of hair growth).

5. Clean thoroughly after each use.

Precision trimming attachment

If your product comes with a precision trimming head, you can use this to shape and maintain your

beard, sideburns and neck hair.

To trim most effectively, place the flat part of comb on your skin and move the trimmer slowly and

with light pressure against direction of hair growth.

Note: For first time use always use the precision trimming head with its comb. After that you may

use this attachment with or without the comb. Keep in mind that when you use the precision

trimmer without the comb it will trim every hair it touches.

5. How do I charge my Philips Groomer?

Follow our instructions below on how to charge your Philips Groomers, Beard Trimmers and Hair

Clippers.

Charging instructions for Philips Groomers

You should charge your Philips Male Grooming devices when the charging indicator on the body of

your groomer signals low battery. If your device does not have a battery indicator on it, then charge

it whenever the groomer is working slower than usual.

6. Insert the charging plug in to you grooming device's charging socket. Make sure the plug's shape

matches the socket and is completely inserted. Do not force it in.

7. The charging indicator on your device will start flashing to indicate that the groomer is charging.

Once the groomer is fully charged, the charging indicator lights up continuously for approximately

30 minutes and then automatically turns off to save energy.

8. After charging, unplug the charger from the power outlet and the groomer. Your groomer is now

ready to use.

9. For most groomers, normal charging time is between 1 to 8 hours. If you are charging your device

for the first time, we recommend letting it charge for at least 3 hours. Check your user manual for

specific charging instructions of your model.

Charging your Philips Groomer with a charging stand

If your Philips Groomer comes with a charging station, follow the instructions below on how to

charge it.

1. Connect the charging station to a working power outlet.

10. Place your groomer in the charging stand. You may see a light on your groomer or charging

stand to indicate that the charging process has begun.

11. Once the groomer is fully charged, unplug the charging stand and continue using your

groomer.

Battery operated devices

Some Philips grooming devices run on disposable AA batteries. To charge these devices you need to

ensure that the disposable batteries have not run out. In case your trimmer does not switch on or

runs slower than before, its time to replace the batteries.

Only use the disposable batteries as specified in your user manual. Do not mix different types of or

old and new batteries. When putting in new batteries make sure the + and - poles of the battery

point in the right direction.

Este manual sirve para los siguientes modelos

Tabla de contenidos

Otros manuales de Producto de cuidado personal de Philips

Philips

Philips SCF128/01 Instrucciones de funcionamiento

Philips

Philips SC527X Manual de usuario

Philips

Philips Colgate SonicPro 50 Manual de usuario

Philips

Philips Lumea precision plus Manual de usuario

Philips

Philips HB554/02 Manual de usuario

Philips

Philips Essence 5000 Series Manual de usuario

Philips

Philips PR3083 Manual de usuario

Philips

Philips NORELCO NT3600 Manual de usuario

Philips

Philips Norelco QP2630 Manual de usuario

Philips

Philips HeartStart FRx Manual de usuario

Philips

Philips HP5258/00 Manual de usuario

Philips

Philips Innergize HB933 Manual de usuario

Philips

Philips AVENT SCF154/10 Manual de usuario

Philips

Philips Sunstudio HB595/A Manual de usuario

Philips

Philips HB811/01 Manual de usuario

Philips

Philips AT100 Manual de usuario

Philips

Philips NORELCO NT9105 Manual de usuario

Philips

Philips Visapure HP5253 Manual de usuario

Philips

Philips EnergyUp HF3431 Manual de usuario

Philips

Philips VisaPure Advanced SC53 Series Manual de usuario

Philips

Philips lifeline AutoAlert Help Button FD100 Manual de usuario

Philips

Philips VisaCare SC6240 Manual de usuario

Philips

Philips HB172/01 Manual de usuario

Philips

Philips Wisp Pediatric Nasal Mask Manual de usuario

Manuales populares de Producto de cuidado personal de otras marcas

Pretika

Pretika ST102 Manual de instrucciones

Beurer

Beurer FC 76 Manual de usuario

Pebble Grey

Pebble Grey 500.40.70-75 Manual de usuario

PUSH

PUSH ortho Manual de usuario

Dermlite

Dermlite DL3N Manual de usuario

DERMAPEN

DERMAPEN SEMI Manual de usuario

HiB

HiB Spectre 50 Manual de usuario

Carex

Carex SunLite Manual de usuario

Roper Rhodes

Roper Rhodes Intense Manual de lista de piezas

Interacoustics

Interacoustics Titan IMP440 Instrucciones de funcionamiento y seguridad

ReTrak

ReTrak VS001 Manual de usuario

LED Technologies

LED Technologies dpl PAIN RELIEF Joint Wrap Manual de usuario

Casa Lusso

Casa Lusso MVL1000x450PR Manual de usuario

Quoizel

Quoizel QR3326 Instrucciones de montaje

Beurer

Beurer EM 37 Manual de usuario

BERTSCHAT

BERTSCHAT HEATED HOODIE PRO - DUAL HEATING Manual de usuario

ACP

ACP OMNISTAND Manual de usuario

Scarlett

Scarlett VitaSpa SC-CA304PS11 Manual de usuario