Philips VL72 Manual de usuario

OUT TO SUPPLY WIRES

SEE NOTE 3

STREET SIDE LABEL

SEE NOTE 5

POLE FASTENERS

SEE NOTES 2 & 6

INSTALLATION:

TURN POWER OFF.

2) Loosen pole fasteners on pod, if required.

3) Make fixture wiring connections to supply wires (by others)

- White to White

- Black to Black

- Green to Green

NOTE:

Both green ground wires from fixture should be

"bugged" together with incoming supply wire.

4) Slip luminaire post fitter onto pole and ensure wires

are not being pinched.

5) Orient by turning luminaire "street side" via label

supplied on globe fitter (pod).

6) Torque pole fasteners as follows to 7 ft. lbs.

CAUTION!

Over torquing of screws may lead to

damage or fatique of fastener.

7) Power to luminaire may now be turned on.

32002016, revision A

INSTALLATION INSTRUCTIONS:

VL71 & VL72

(Fixture)

SAFETY WARNING:

ALWAYS TURN FIXTURE OFF/DISCONNECT POWER BEFORE PERFORMING ANY MAINTENANCE!

Ensure that the AC service is OFF before any installation or maintenance.

Do not switch service to ON until the entire installation is complete.

Philips Lighting Company

200 Franklin Square Drive

Somerset, NJ 08873

Phone (US): 855-486-2216

Phone (CAN): 800-668-9008

TOOLS REQUIRED:

-5/32" Allen Wrench/Driver

-Torque Wrench capable of 7 ft. lbs. torque

This fixture is intended for installation in accordance with the National Electrical Code and local code

specifications. Failure to adhere to these codes and instructions may result in serious injury and/or damage to

the fixture components and void the warranty. These instructions do not purport to cover all details or vairations

in equipment, nor to provide for every possible contingency related to installation, operation, maintenance, or

mounting situation. Should specific problems occur that are not addressed by these instructions, contact your

Sales Representative or distributor for assistance. Retain these instructions for future reference.

POD

(EXISTING)

LOOSEN FASTENERS

TO REMOVE GLOBE

(EXISTING)

CAMDEN ADAPTER

(NEW)

1/4-20 SCREWS

(NEW)

ECOSWAP ASSY

(NEW)

INSTALLATION:

TURN POWER OFF.

2) Loosen, but do not remove (4) globe fasteners on pod.

3) Lift globe from fixture.

4) Remove existing ballast assembly.

- Push spring clip to release ballast module, twist ballast

module counter-clockwise, and lift to remove.

- Disconnect blue power quick disconnect.

5) Remove ballast assembly ring by removing existing screws.

6) Remove terminal block and bracket (if applicable)

7) Assemble Ecoswap to camden adapter by twisting

clockwise until spring clip snaps into place.

8) Make proper wiring connections.

NOTE:

In many cases, you may need to remove existing

blue power disconnect to "bug" wires.

9) Install entire unit onto fixture with (2) 1/4-20 screws while

ensuring wires are not being pinched.

NOTE:

For Type 3 distribution modules, rotate to orient

"Street Side (SS)" identification located on

Ecoswap, toward street.

10) Carefully lower globe onto fixture.

11) Tighten (4) globe fasteners to secure globe.

REFERENCE:

Please see enclosed Power Selection drawing

to adjust wattage output of Ecoswap module.

32002016, revision A

INSTALLATION INSTRUCTIONS:

V71 & V72

(Retrofit)

SAFETY WARNING:

ALWAYS TURN FIXTURE OFF/DISCONNECT POWER AND ALLOW

TO COOL BEFORE PERFORMING ANY MAINTENANCE

Philips Lighting Company

200 Franklin Square Drive

Somerset, NJ 08873

Phone (US): 855-486-2216

Phone (CAN): 800-668-9008

TOOLS REQUIRED:

-1/2" Socket/Driver

-5/32" Allen Wrench/Driver

-Philips Head Screw Driver

Este manual sirve para los siguientes modelos

Tabla de contenidos

Otros manuales de Luminaria de Philips

Philips

Philips Lytespan 23S20P3 Manual de usuario

Philips

Philips Lytespan LLACTW Manual de usuario

Philips

Philips Lytecaster 1000ICV Manual de usuario

Philips

Philips Louver IC Series Manual de usuario

Philips

Philips Lytecaster 316X Manual de usuario

Philips

Philips 69108-32-PU Manual de usuario

Philips

Philips Lytespan 23F39T6 Manual de usuario

Philips

Philips Lytespan 6497 Manual de usuario

Philips

Philips Calculite 8044 Manual de usuario

Philips

Philips SmartBright Dual Select Waterproof Guía del usuario

Philips

Philips 6910196PH Manual

Philips

Philips 6910832PU Manual

Philips

Philips Lytecaster 1001SW Manual de usuario

Philips

Philips Lytespan 23S39MR Manual de usuario

Philips

Philips selecon plcyc1 MKII Manual de instrucciones

Philips

Philips Calculite C4X9LEDLW240 Manual de usuario

Philips

Philips Lytespan 83B39E Manual de usuario

Philips

Philips GreenPerform RC160V Guía del usuario

Philips

Philips C4T4W Manual de usuario

Philips

Philips GreenUp Wellglass BY200P Series Guía del usuario

Philips

Philips Lytecaster 1001 Manual de usuario

Philips

Philips EvoKit 2x4 P 36L 36W 835 2 0-107 G2 Manual de usuario

Philips

Philips ColorBlast 6 Manual de usuario

Philips

Philips 69101-30-PH Manual de usuario

Manuales populares de Luminaria de otras marcas

Emos

Emos CLASSIC ZY1431T Manual de usuario

Westinghouse

Westinghouse Outdoor Lighting Fixture Manual de usuario

Hedler

Hedler C 12 silent Manual de usuario

Blizzard Lighting

Blizzard Lighting Puck: CSI Manual de usuario

Energetic Lighting

Energetic Lighting ELYSL-5004 Series Manual de usuario

Lightmaxx

Lightmaxx Shaft 5R Manual de usuario

Triarch

Triarch 31083 Manual de usuario

IKEA

IKEA TIVED Manual de usuario

Lightolier

Lightolier LP200 Manual de usuario

Chauvet Professional

Chauvet Professional ROGUE R1 BEAM WASH Manual de usuario

Martin

Martin MAC 250 Krypton Manual de usuario

Cooper Lighting

Cooper Lighting Halo L3232E Manual de usuario

Stageline

Stageline ODW-2410RGBW Manual de usuario

Light Sky

Light Sky Tornado Series Manual de usuario

Lightolier

Lightolier Paralyte 2424 PLA2G9LS26U Manual de usuario

Lightolier

Lightolier Lytespan 83ED17S Manual de usuario

Lightolier

Lightolier Calculite CS8226 Manual de usuario

ArtFox

ArtFox Beam 15R extreme Manual de usuario