Philips HU4803 Manual de usuario

EN User manual 1

DA Brugervejledning 15

DE Benutzerhandbuch 29

ES Manual del usuario 45

FI Käyttöopas 61

FR Mode d’emploi 75

IT Manuale utente 91

NL Gebruiksaanwijzing 107

NO Brukerhåndbok 123

SV Användarhandbok 137

4241 210 88662

HU4803

HU4813

MAX

Tap water

1 hour

F G

English

Contents

1 Important 2

Safety 2

2 Your humidier 5

What's in the box 5

3 Getting started 5

Prepare for humidication 5

4 Using the humidier 6

Understand the humidity

indication 6

Understand the healthy air

protect alert and lock 6

Switch the humidier on and o 6

Change the fan speed 7

Set the timer 8

Set the humidity level 8

Water level 8

Rell water 9

5 Clean your humidier 9

Clean the body of the humidier 9

Clean the water tank 9

Clean the humidication lter 10

6 Replacing the

humidication lter 10

7 Troubleshooting 11

8 Guarantee and service 13

Order parts or accessories 13

9 Notices 13

Electromagnetic elds (EMF) 13

Recycling 14

service center authorized

by Philips, or similarly

qualied persons in order

to avoid a hazard.

• Do not use the humidier

if the plug, the power cord,

or the humidier itself is

damaged.

• This appliance can be

used by children aged

from 8 years and above

and persons with reduced

physical, sensory or

mental capabilities or

lack of experience and

knowledge if they have

been given supervision or

instruction concerning use

of the appliance in a safe

way and understand the

hazards involved. Cleaning

and maintenance shall

not be made by children

without supervision.

• This appliance is not a

toy. Children should be

supervised to ensure that

they do not play with the

humidier.

• Do not block the air inlet

and outlet, e.g. by placing

items on the air outlet or in

front of the air inlet.

1 Important

Safety

Read this user manual carefully before

you use the humidier, and save it for

future reference.

Danger

• Do not spray any

ammable materials such

as insecticides or fragrance

around the humidier.

• The water in the water tank

is not suitable for drinking.

Do not drink this water

and do not use it to feed

animals or to water plants.

When you empty the water

tank, pour the water down

the drain.

Warning

• Check if the voltage

indicated on the bottom of

the humidier corresponds

to the local power voltage

before you connect the

humidier.

• If the power cord is

damaged, you must have

it replaced by Philips, a

English

• Avoid knocking against the

humidier (the air inlet and

outlet in particular) with

hard objects.

• Do not insert your ngers

or objects into the air

outlet or the air inlet to

prevent physical injury

or malfunctioning of the

humidier.

• Do not use this humidier

when you have used

indoor smoke-type insect

repellents or in places

with oily residues, burning

incense, or chemical

fumes.

• Do not use the humidier

near gas appliances,

heating devices or

replaces.

• Always unplug the

humidier after use and

before you clean it.

• Do not ll water from the

air outlets on top of the

humidier.

• Place the humidier

properly to prevent

children from knocking it

over.

Caution

• If the power socket used to

power the humidier has

poor connections, the plug

of the humidier becomes

hot. Make sure that you put

the plug of the humidier

into a properly connected

power socket.

• Always place and use

the humidier on a dry,

stable, level, and horizontal

surface.

• Do not place anything on

top of the humidier and

do not sit on the humidier.

• Make sure that the

humidier is well

assembled/connected

every time after you clean

it or after you remove

the upper cover and/

or water tank for relling.

The humidier must be

properly assembled to

deliver a good and safe

performance.

• Only use the original

Philips lter specially

intended for this humidier.

Do not use any other lter.

• Do not use the humidier

in a room with major

temperature changes,

as this may cause

condensation inside the

humidier.

• When the humidier is

not used for a long time,

bacteria and mold may

grow on the lters. Check

the lters before you start

using the humidier again.

If the lter is very dirty with

dark spots, replace it (see

chapter ‘Replacing the

humidication lter’).

• Do not wash the lter in a

washing machine or dish

washer, otherwise the lter

will be deformed.

• The humidier is only

intended for household

use under normal

operating conditions.

• Clean the water tank and

humidication lter every

week to keep it clean.

• Only ll the water tank with

cold tap water. Do not use

ground water or hot water.

• Do not put any substance

other than water in the

water tank. Do not add

fragrance or chemical

substance into the water.

Use only water (tap,

puried, mineral, any sort

of potable water).

• If you do not use the

humidier for a long time,

clean the water tank and

dry the humidication lter.

• If you need to move the

humidier, disconnect the

humidier from the power

supply rst. Then empty

the water tank, and carry

the humidier horizontally.

• Keep the humidity sensor

dry. If the sensor gets

wet, it could miscalculate

the humidity level, and

the humidier could

stop working due to

miscalculated humidity

level.

• Unplug the appliance

during lling and cleaning.

English

3 Getting started

Prepare for humidication

1 Hold by both sides of the upper unit

to lift it up (g. b).

2 Fill the water tank with cold tap

water until water reaches the

maximum water level indication

(g. c).

3 Place the upper unit back onto the

water tank (g. d).

2 Your humidifier

Congratulations on your purchase, and

welcome to Philips!

To fully benet from the support that

Philips oers, register your product at

www.philips.com/welcome.

The Philips humidier brings fresh,

humidied air to your house for the

health of your family.

It oers you advanced evaporation

system with NanoCloud technology,

using a special humidication lter

which adds H2O molecules to the dry

air, and produces healthy humid air

without formation of water mist. Its

humidication lter retains bacteria,

calcium and other particles from the

water. It delivers only pure humidied

air in your home. No more dry air

in the winter season or from the air

conditioning.

Read this user manual carefully before

you install and use the humidier. Save

it for future reference.

What's in the box

Check and identify the contents of your

package (g. a):

AUpper unit

BHumidication lter (HU4102)

CFilter support

DFloat

EWater tank

FUser manual

GWarranty

The healthy air protect lock always

ensures that your humidier does not

work without water in the tank. When

the water tank is empty and needs to

be relled, the healthy air protect lock

shuts o the humidier after 30 minutes

and a red indicator lights up. When

you rell the water tank properly, the

humidier is turned on again.

Note

• In sleep mode, the red indicator does

not blink, it turns on when the water

level is low.

Switch the humidier on

and o

1 Put the plug of the humidier into

the wall socket.

2 Press the power button to switch

on the humidier (g. f).

» The current humidity level and

fan speed display on the screen.

3 Press the power button to switch

o the humidier.

Note

• If the water level in the tank is

getting very low, the humidier stops

humidifying. The red indicator light rst

starts blinking and then remains on.

• The humidier releases very ne invisible

mist, so it is normal that you cannot see

the mist.

4 Using the

humidifier

Understand the humidity

indication

The humidier is equipped with a built-

in humidity sensor. You can set the

target humidity level at 40%RH, 50%RH

and 60%RH. The ambient humidity level

displays on the center of the control

panel from 20%RH to 95%RH.

Note

• A comfortable humidity level is from

40RH% to 60RH%.

• The accuracy of the humidity indication

is approximately ±10%.

• It takes some time to measure the

humidity level in the room.

Understand the healthy air

protect alert and lock

The healthy air protect alert gives you

a timely warning when the water tank

needs relling. When the water in the

tank starts getting low, a red indicator

on the control panel starts blinking to tell

you that it is time to rell the tank (g. e).

It blinks for 30 minutes. After that, the

indicator remains on before the water

tank is relled with water.

English

Manual

You can manually select the desired fan

speed.

1 Press the speed button once or

more times to select the desired fan

speed (AUTO, , or ) (g. h).

» The selected fan speed light

goes on.

Tip

• If the desired humidity level is reached,

you can select a lower fan speed.

However, if the desired humidity level is

not reached, you can select a higher fan

speed to humidify the air more quickly.

Sleep mode

In sleep mode, the humidier operates

quietly with dimmed light for your

undisturbed sleep.

1 Press the speed button once or

more times to select sleep mode

(g. i). In sleep mode, only the

speed light is on.

2 To change to another fan speed,

simply press the speed button

again.

Note

• Sleep mode only works at speed .

• In sleep mode, the red indicator does

not blink, but remains on when the

water level gets low.

• In sleep mode, you can only set the

timer; the humidity level cannot be set,

and the humidity light is o.

Change the fan speed

Auto

The auto mode uses the digital

sensor to constantly monitor the air

humidity. It turns your humidier on

and o whenever needed to ensure the

humidity level is constantly at the right

level. The default humidity level of the

auto mode is set at 50RH%, but you can

change it to the humidity level you need

under the auto mode. Next time when

you switch on the humidier, it will

remember your last set humidity level,

unless you have removed the plug from

the wall socket. In this case the default

humidity level is set at 50RH% again.

1 Press the speed button to select

the auto mode (g. g).

» The AUTO speed light goes on.

Tip

• If the desired humidity level is reached,

the humidier changes to a lower fan

speed automatically.

• In AUTO mode, the fan speed changes

between and .

Set the timer

With the timer function, you can let the

humidier operate for a set number of

hours. When the set time has elapsed,

the humidier automatically switches

o.

1 Press the timer button once or

more times to choose the number

of hours you want the humidier to

operate (g. j).

» The corresponding timer light

(1H, 4H or 8H) goes on.

To deactivate the timer function, press

the timer button repeatedly until the

timer light turns o.

Set the humidity level

Note

• Make sure that the water tank is lled

with water before the humidier can

function (see the chapter 'Get started',

section 'Prepare for humidication').

1 Press the humidity button once

or more times to set the desired

air humidity to 40RH%, 50RH% or

60RH% (g. k).

» The humidity light (40, 50 or 60)

of the humidity level goes on.

» The ambient humidity level

displays on the center of the

control panel.

Tip

• A comfortable humidity level is from

40RH% to 60RH%. You can choose

the preferred humidity level at 40%RH,

50%RH or 60%RH.

Note

• If no preset humidity level is selected,

the humidier will stop working when

the humidity level reaches 50RH% in the

auto mode and 70RH% in other modes.

Water level

When there is not enough water in the

water tank, the appliance will work in

the following ways.

• The water level drops and the

red indicator light starts blinking

(g. e).

• The humidier continues to work for

30 minutes and then stops working,

the red indicator light remains on.

The appliance will resume work when

you rell water into the water tank.

Note

• If the water tank is empty when the

humidier is plugged in and switched

on, the red indicator light blinks for

2 minutes and then remains on before

the water tank is relled with water.

• It is normal to nd some water left in the

tank.

Otros manuales para HU4803

Este manual sirve para los siguientes modelos

Tabla de contenidos

Idiomas:

Otros manuales de Humidificador de Philips

Philips

Philips HU4901 Manual de usuario

Philips

Philips HU4802 Manual de usuario

Philips

Philips respironics Manual de usuario

Philips

Philips HU4803/10 Manual de usuario

Philips

Philips respironics Manual de usuario

Philips

Philips HU4901 Manual de usuario

Philips

Philips HU4803 Manual de usuario

Philips

Philips AC3829 Manual de usuario

Philips

Philips HU4801 Manual de usuario

Philips

Philips HU4801 Manual de usuario

Philips

Philips HU4801 Manual de usuario

Philips

Philips HU4810/10 Manual de usuario

Philips

Philips HU4801 Manual de usuario

Philips

Philips HU4706 Manual de usuario

Philips

Philips HU4804 Manual de usuario

Philips

Philips AC4085 Manual de usuario

Philips

Philips HU4811 Manual de usuario

Philips

Philips HU4802 Manual de usuario

Philips

Philips HU5931 Manual de usuario

Philips

Philips AC4084 Manual de usuario

Philips

Philips HU4901 Manual de usuario

Philips

Philips HU4803 Manual de usuario

Philips

Philips HU4803 Manual de usuario

Philips

Philips HU4902 Manual de usuario

Manuales populares de Humidificador de otras marcas

Boneco

Boneco H300 Manual de usuario

Bionaire

Bionaire CM1 Manual

Air-O-Swiss

Air-O-Swiss AOS 7131 Manual

KING

KING K 5002 Rainbow Manual de usuario

Crane

Crane EE-6902 Manual de usuario

Glaziar

Glaziar Ness Manual de usuario

Honeywell

Honeywell MISTMATE HUL520BC Manual de usuario

Stadler Form

Stadler Form Hera Manual de usuario

Hunter

Hunter 31206 Manual de usuario

TaoTronics

TaoTronics TT-AH004 Manual de usuario

adorini

adorini Cigar Heaven Manual de usuario

Lanaform

Lanaform Aroma Manual de usuario

Aprilaire

Aprilaire 800 Series Manual de usuario

Pyle

Pyle SereneLife PHUMDIF8 Manual de usuario

Trotec

Trotec B 200 Manual de usuario

Pure Humidifier

Pure Humidifier EC Series Manual de usuario

Crane

Crane EE-864 Manual de usuario

air&me

air&me Solnan Manual de usuario