Philips HR7730/80 Manual de usuario
ServiceManual
Philips Domestic Appliances and Personal Care
Published by Philips Domestic Appliances and Personal Care Printed in the Netherlands © Copyright reserved Subject to modification
Foodprocessor
HR7730/80
05/01
PRODUCT INFORMATION
Features
- Click & Go : Easy assembly and dissasembly system
- Powerful (700 W) : Capable of handling even the toughest tasks.
- Large bowl (3,6 L dry, 1,8 L liquid capacity) : Capable of processing large batches at once.
- Easy Clean button : Easy cleaning of chopper bowl, which is also dishwasher safe.
- 2 speeds and pulse function : Optimally adjusting the speed to the job.
- Graphics on the appliance : Quickly choosing the right accessory for the job.
- Suction feet : Keeping the appliance perfectly stable and safe during operation.
- Cord Storage : Adjusting the cord length to the specific situation.
Accessories
- Stainless steel metal blade : Chopping, blending, pureeing, and mixing of meat, fish, vegetables, dairy,
fruits and nuts.
- Plastic insert holder : Disc-shaped space-saving tool holder for different inserts.
- Stainless steel slicing insert medium : Slicing vegetables and fruits.
- Stainless steel shredding insert medium : Shredding vegetables, fruits and cheese.
- Plastic kneading accessory : Kneading all kinds of dough (up to 1,3 kg dough) and mixing cake batters
(up to 0,8 kg of batter).
- Plastic emulsifying disc : For all kinds of whipping, whisking and emulsifying jobs.
- Citrus press : For making large quantities (1,8L) of citrus juice in a short time.
- Plastic pusher : Pushing the ingredients in the bowl during the process.
The pusher has a hole, so that oil can gradually be added.
Safety
- Automatic resettable thermal cut off : Protecting the motor against overheating.
- Built-in safety lock : Detects whether lid & bowl are assembled.
- Brake system : Stops the accessories within 1,5 seconds.
HR7730/80
2-8
- Motor : Universal, radio/TV interference suppressed
- Power consumption : 700 Watt max
- Voltage and frequency : 220 V - 240 V, 50 Hz
- Cord set : 100 cm, double insulated with moulded on plug
- Speed setting : 2 speeds & pulse
- Bowl capacity : 3,6 L dry ingredients, 1,8 L liquid ingredients
Materials used
- Bowl, lid : SAN
- Housing, pusher, inlay bowl handle, : PP
Citrus press (sieve & cone),
emulsifying disc, kneading accessory
- Insert holder : ABS
Colours
- White with orange and yellow accents, clear transparent bowl and jar.
Preliminary data No. of pcs Weight (kg) Dimensions (mm)
- F-box 1 5,2 390 x 290 x 400
TECHNICAL INFORMATION
Pos Service code Description
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
17
18
19
4203 065 65570
4203 065 65370
4203 065 65380
4203 065 65150
4203 065 65140
4203 065 65310
4203 065 65320
4203 065 65160
4203 065 65240
4203 065 65250
4203 065 65270
4203 065 65330
4203 065 65180
4203 065 65130
4203 065 65390
4203 065 65220
4203 065 65280
4203 065 64020
4203 065 64000
4203 065 65400
Housing Cap HR7730
Screw cap Rear
Screw cap Front
Screw cap (3 pcs.)
Housing Top
Coupling Toolholder
Toolholder
Blender Coupling
Power Knob
Quick Clean Knob
Spring - Quick Clean Knob
Cordset Holder
Detection Lever - Jar
Housing HR7730
Spring Bowl Detection
PCB Frame Assy HR7730-40
PCB Assy HR7730
Cordset EU
Cordset UK
Cordset Swiss
Pos Service code Description
20
21
23
24
25
27
28
29
30
35
36
37
38
40
41
50
52
55
62
63
64
4203 065 65170
4203 065 65450
4203 065 65300
4203 065 65780
4203 065 65770
4203 065 65440
4203 065 65260
4203 065 65410
4203 065 65460
4203 065 65620
4203 065 65610
4203 065 65630
4203 065 65600
4203 065 65520
4203 065 65530
4203 065 61540
4203 065 61560
4203 065 65510
4203 065 65500
4203 065 65490
4203 065 65790
Airtunnel
Motor Assy
Bottom Assy
Retaining Ring
Washer
Coupling Assy
Tension Assy
Toothed Wheel Assy
Belt
Pusher Chopper Bowl
Chopping Bowl Lid
Rubber Sealing Ring
Chopper Bowl
Citrus Press Cone
Citrus Press Sieve
Slicing Insert medium
Shredding Insert medium
Insert Holder Assy
Plastic Kneader
Chopping Knife Assy
Emulsifying Disc
PARTS LIST
HR7730/80
3-8
EXPLODED VIEW
4
14
12
7
15
6
1
19
20
28
3
2
18
17
24
25
27
11
10
9
23
8
21
29
30
5
Shown parts without Pos. no. are not available as spareparts!
HR7730/80
4-8
EXPLODED VIEW
35
45
46
47
50
52
55
64
36
37
38
62
63
40
41
HR7730/80
5-8
REPAIR INSTRUCTION
To repair something inside the foodprocessor:
1. Remove the screw of the cord holder.
To remove the Top Housing:
1. Push a screwdriver through the 2 Screw Caps of the
Housing Cap to remove them.
2. Use a screwdriver Torx T15 to remove the 2 screws from
the Housing Cap.
To remove the Housing Top:
1. Remove the screw of the Housing Top and lift it up.
HR7730/80
6-8
- In this situation, you could replace for example the cord set
or the PCB.
- Be sure, that you don´t loose the Spring – Bowl detection
on the bottomside of the housing!
- Be sure, that a replaced cord set is also placed in the
designed cable guide.
To remove the Housing:
1. Remove the Toolholder coupling by turning it
counterclockwise with protected tongs to prevent the
coupling from damages (You can use e.g. foam rubber).
2. Remove the 4 screws on the bottomside of the
foodprocessor.
The green arrow shows you the hole, where you can stick
through a pin to fixate the acc. drive wheel, when you want
to remove the blender coupling. After that you can turn
the blender coupling clockwise ´for removing it.
3. Remove the 2 last screws (marked with the red arrows).
After this you can remove the housing.
REPAIR INSTRUCTION
HR7730/80
7-8
To remove the PCB´s:
1. Remove the 2 screws to loosen the Main PCB.
To remove the PCB Frame:
1. Release the 3 snaphooks, which hold the PCB on the
frame.
Soldering of Motor wires on PCB:
- Here you can see the colours of the Motor wires and their
soldering points on the PCB.
Solder point 4 - brown wire
Solder point 3 - yellow wire
Solder point 5 - black wire
Solder point 1 - red wire
Solder point 2 - white wire
To remove the upper part of the coupling:
1. Remove the retaining ring with a screwdriver.
To remove the lower part of the coupling:
1. Remove the retaining ring with a screwdriver.
If you want to exchange the toothed wheel, you have to
remove the small axle from the „click & go“ system (green
arrow).
REPAIR INSTRUCTION
HR7730/80
8-8
To remove the toothed wheel:
1. Remove the retaining ring with a screwdriver.
To replace the Motor:
1. Remove the 3 screws from the Airtunnel.
After removing the Airtunnel, you can exchange the motor,
the belt or the belt tension.
Remove the Belt tension, by lifting it a little bit
(green arrow) and pulling it in direction of the red arrow.
REPAIR INSTRUCTION
Otros manuales para HR7730/80
1
Tabla de contenidos
Otros manuales de Procesador de alimentos de Philips
Philips
Philips Cucina HR7735 Manual de usuario
Philips
Philips HR7761 Manual de usuario
Philips
Philips Avent SCF862/01 Manual de usuario
Philips
Philips HR7782 Manual de usuario
Philips
Philips HR7805/04 Manual de usuario
Philips
Philips Walita RI1396 Manual de usuario
Philips
Philips Cucina HR7633 Manual de usuario
Philips
Philips HR 2874 Manual de usuario
Philips
Philips HR7628 Manual de usuario
Philips
Philips Essence HR7754 Manual
Philips
Philips HR2874/00 Manual de usuario
Philips
Philips Essence HR7754/01 Manual
Philips
Philips HR1848 Manual de usuario
Philips
Philips HR7756/01 Manual
Philips
Philips HR7761 Manual de usuario
Philips
Philips HR7775/00 Manual de usuario
Philips
Philips HR7776 Manual de usuario
Philips
Philips HR7771/50 Manual de usuario
Philips
Philips AVENT EasyPappa Plus 4in1 SCF875 Manual de usuario
Philips
Philips HR 7633 B Manual de usuario
