Philips 26HFL5561L/27 Manual de usuario

www.philips.com/welcome

26HFL5561L/27

26HFL5561V/27

32HFL5561D/27

32HFL5561L/27

32HFL5561V/27

37HFL5581D/27

37HFL5581L/27

37HFL5581V/27

42HFL5581L/27

42HFL5581V/27

52HFL5581L/27

52HFL5581V/27

EN Quick Start Guide

1 How to use this guide

The Quick Start Guide helps you install the Philips commercial

television, as quickly as possible. It contains the necessary information

to install the TV and congure the settings. Read and understand the

instructions in the Quick Start Guide before you use your TV.

For detailed information on additional features, download the user

manual by selecting your TV model at www.philips.com/hospitality.

The Quick Start Guide contains the following information:

• contents of the box

• standalone installation instructions

• conguration of channel, advanced and SmartFeatures

settings

• cloning of data

• troubleshooting

OSS declaration

Open source software

This television contains open source software. Philips BU Hospitality

hereby offers to deliver or make available, upon request, for a charge

no more than the cost of physically performing source distribution, a

complete machine-readable copy of the corresponding source code on

a medium customarily used for software interchange.

To obtain the source code, write to:

Philips Singapore Pte Ltd.

Philips BU Hospitality

Software Development Manager

620A Lorong 1, Toa Payoh

Singapore 319762

This offer is valid for three years after the date of purchase of this

product.

Energy savings mode

This TV is congured in Energy Savings mode.

• This mode will disable the side control keys of the TV and result in a

longer turn on time. To optimize the TV performance, adjust the LOW

POWER STANDBY setting in TV SETUP menu.

• For more details, refer to the information on conguring the LOW

POWER STANDBY feature (see ‘Congure SmartPower settings’ on page

7).

English

2 The contents of the box

The box contains the following items:

• which secure the TV stand to the furniture of the hotel room to

prevent unauthorized removal or theft

• desk-to-stand screws (2)*

• desk-to-stand washers (2)*

• desk-to-stand secure groove nuts (2)*

• which secure the TV stand to the TV to prevent unauthorized

removal or theft

• stand-to-TV secure screws (4)*

• stand-to-TV cross-head screws (4)*

• which secure the TV stand to the furniture of the hotel room

with non-drilling surfaces

• Industrial strength double sided tape (4)*

• the TV

• the TV stand

• Quick Start Guide

• 2-pin power cord

• Guest remote control*

Note

• * The items are available in selected models only.

Note

• The tools required to secure the screws are not included in the box.

Contact your Philips authorized agent or dealer in NAFTA to obtain the

tools.

x 4

x 2 x 2

x 2

x 4

26”/32”/37”/42”/52” models

(Available in selected models only)

x 4

• Press Power on the setup remote control.

5 Press M on the setup remote control to display the setup menu.

6 Press to select AUTO INSTALL TV.

7 Press to start the automatic installation of channels.

»After the channels are installed, you can change the settings of

the channels, picture, sound, and volume.

POWER

SLEEP

SMART

GUEST

DCM

SETUP

TEXT

RECALL

4 5 6

2 3

COMMUNICATION >

USE CHANNEL TABLE

YES

CURRENT RING

DIGITAL SETUP

SETUP

CABLE TUNING YES

CHANNEL INSTALL >

CONFIGURATION

SMARTCLONE

RING2

LANGUAGE ENGLISH

AUTO INSTALL TV >

3 Standalone installation

This section describes how to install the TV channels automatically.

1 Connect the RF signal from the wall socket to the TV.

2 Plug the 2-pin power cord into the power outlet.

3 Set the switch at the side of the setup remote control to SETUP.

Note

• The setup remote control is not included in the box. Contact your Philips

authorized agent or dealer to obtain the remote control.

4 Turn the TV on.

• Press POWER at the side of the TV.

TV ANTENNA

Cable

POWER

SLEEP

GUIDE

SMART

GUEST

DCM

SETUP

TEXT

RECALL

HCLOV

RESET CH

4 5 6

2 3

A/CH

SETUP

English

4 Press 0-9 (Numeric buttons) to enter the physical channel

number.

5 Press to set the MPEG PROGRAM NUMBER to a particular

program in the physical channel.

6 Press 0-9 (Numeric buttons) to enter the program number.

Note

• You can also select DIGITAL CH SCROLL and press to select the

digital channel numbers.

Select a ring

1 Press M on the setup remote control to display the setup menu.

2 Select the channel that you want to save in a ring and the input

source (see ‘Manual installation of analog channels’ on page 4).

3 Press to select CHANNEL INSTALL > RINGS.

4 Press to select a ring number.

»A ashing red dash appears next to the selected ring.

5 Press to save or remove a channel from the ring.

»The ring is marked by an ‘X’ when the channel is saved in it.

6 Press to select a category option (HIGH DEFINITION,

SPORTS, NEWS, etc) to save the channel.

7 Press to select YES to save the channel to this category or

NO to remove the channel.

CHANNEL TV 2

INPUT TUNER

LABEL

( ) >

MUTE

NONE

CHANNEL INSTALL

DIGITAL CH SCROLL

CHANNEL LOGO >

RF CHANNEL NUMBER

MPEG PROGRAM NUMBER

DIGITAL YES

RINGS >

HIGH DEFINITION

RINGS

SPORTS

NEWS YES

KIDS YES

MOVIES YES

NETWORK YES

ADULT YES

LIFESTYLE YES

OTHERS NO

YES

CHANNEL RINGS (1X)(2 )(3 )(4 )

4 Change the channel

settings

This section describes how to change the channel settings.

Manual installation of analog channels

1 Press M on the setup remote control to display the setup menu.

2 Press to select CHANNEL INSTALL > CHANNEL.

3 Press 0-9 (Numeric buttons) to select a channel.

• For cable mode, select a number between 01 - 250.

• For antenna mode, select a number between 02 - 250.

4 Press to select INPUT, and then press to select the source

of input.

Manual installation of digital channels

1 Press M on the setup remote control to display the setup menu.

2 Press to select CHANNEL INSTALL > DIGITAL > YES.

3 Press to set the RF CHANNEL NUMBER to the physical

channel number.

INPUT TUNER

DIGITAL

RINGS

LABEL ( ) >

MUTE NONE

CHANNEL INSTALL

RF CHANNEL NUMBER 2

MPEG PROGRAM NUMBER 8

CHANNEL LOGO >

CHANNEL TV 2

INPUT TUNER

RINGS

LABEL

( ) >

MUTE

NONE

CHANNEL INSTALL

DIGITAL CH SCROLL

CHANNEL LOGO >

RF CHANNEL NUMBER

MPEG PROGRAM NUMBER

DIGITAL YES

3 Press to set the following values:

• WELCOME MESSAGE: Sets or clears a welcome message.

• SWITCH ON CHANNEL: Sets a channel that is displayed

when the TV is turned on.

• SWITCH ON SMARTGUIDE: Sets the display of

SmartGuide categories screen when the TV is turned on.

• SWITCH ON VOLUME: Species the volume at which the

TV is turned on.

• SWITCH ON PIC FMT: Sets the picture format that is used

to display.

• POWER ON: Sets the power mode that is used when the

TV is turned on.

• VOLUME INDICATOR: Sets the display of volume

indicator.

• CHANNEL DISPLAY: Sets the display of channel number

and channel name on the screen.

Congure the picture and sound settings

1 Press M on the setup remote control to display the setup menu.

2 Press to select CONFIGURATION > PICTURE/

SOUND.

3 Press to adjust a setting for your TV.

SWITCH ON CHANNEL TV 2

SWITCH ON PIC FMT

WIDESCREEN

POWER ON

VOLUME INDICATOR

SWITCH ON VOLUME 30

WELCOME MESSAGE

LAST STATUS

YES

SWITCH ON SMARTGUIDE YES

SWITCH ON / OSD

CHANNEL DISPLAY ALL

COLOR 38

SHARPNESS

TINT

ACTIVE CONTROL

PICTURE / SOUND

CONTRAST 70

BRIGHTNESS 45

YES

TREBLE

BASS

BALANCE

AVL

5 Configure advanced

settings

This section describes how to congure the advanced settings for the

TV such as volume, channel, picture format, power mode, picture, sound,

security, control, ratings, and hotel information.

Access the conguration menu

1 Press M on the setup remote control to display the setup menu.

2 Press to select CONFIGURATION.

3 Press to select one of the following to congure the

settings:

• SWITCH ON/OSD: Sets the default value for settings such

as volume, channel, picture format, and power mode. These

values are used when the TV is switched on.

• PICTURE/SOUND: Sets the picture and sound settings for

the TV.

• SECURITY: Sets the level of security by conguring the

settings such as, TV lock, RC lock, decryption control and

V-track.

• CONTROL: Sets the control settings such as ESP, Smart

Guide, and SmartWindow.

• SMARTFEATURES: Sets the SmartPower, USB break-

in, SmartGuide Category, SmartUpdate, and software

download settings.

• AUDIO FEATURES: Sets the correct audio source.

• CC/V-CHIP: Sets the closed caption settings and ratings.

• HOTEL INFORMATION: Set the hotel information

including hotel name and room number.

Congure the switch-on settings

1 Press M on the setup remote control to display the setup menu.

2 Press to select CONFIGURATION > SWITCH ON/

OSD.

PICTURE / SOUND >

CONTROL

SMARTFEATURES

AUDIO FEATURES

CONFIGURATION

SECURITY >

SWITCH ON / OSD

CC / V-CHIP >

HOTEL INFORMATION >

English

Congure the control settings

1 PressMonthesetupremotecontroltodisplaythesetupmenu.

2 Press toselectCONFIGURATION > CONTROL >

MAX VOLUME.

3 Press toadjustthemaximumvolumefortheTV.

4 Press toadjustothercontrolsettingsfromthismenu.

Note

• SMARTWINDOWisavailableonselectedmodelsonly.

DIGIT TIMEOUT 3.0

SOURCE MENU ITEM

PIC FMT MENU ITEM

SMARTWINDOW MENU ITEM

CONTROL

3 DIGIT ENTRY NO

ESP OFF

SMART GUIDE

MIN VOLUME

MAX VOLUME

Congure SmartGuide Categories

This section provides information to congure SmartGuide Categories

icons. Guests can access these icons by pressing the CHANNEL

GUIDE button on the guest remote control to display the SmartGuide

Categories screen. Refer to the previous chapter for information to

assign TV channels to categories (see ‘Select a ring’ on page 4).

1 Press M on the setup remote control to display the setup menu.

2 Press to select CONFIGURATION > SMARTFEATURES

> SMARTGUIDE CATEGORIES.

3 Press to select one of the following to congure the

settings:

• CHANNEL GUIDE KEY: Sets the default screen that will be

shown when you press the CHANNEL GUIDE button on the

remote control. Select between SMARTGUIDE categories or

CHANNEL LIST screen.

• HIGH DEFINITION: Enables or disables the high denition icon

in the SmartGuide Categories screen.

• SPORTS: Enables or disables the sports icon in the SmartGuide

Categories screen.

• NEWS: Enables or disables the news icon in the SmartGuide

Categories screen.

• KIDS: Enables or disables the kids icon in the SmartGuide

Categories screen.

• MOVIES: Enables or disables the movies icon in the SmartGuide

Categories screen.

• NETWORK: Enables or disables the network icon in the

SmartGuide Categories screen.

• ADULT: Enables or disables the adult icon in the SmartGuide

Categories screen.

• LIFESTYLE: Enables or disables the lifestyle icon in the

SmartGuide Categories screen.

• OTHERS: Enables or disables the others icon in the SmartGuide

Categories screen.

Congure SmartSecure settings

1 Press M on the setup remote control to display the setup menu.

2 Press to select CONFIGURATION > SECURITY >

SMARTSECURE.

LOW POWER STANDBY

SMARTFEATURES

SMARTPOWER OFF

AUTOSENSE NO

USB BREAK-IN

SW DOWNLOAD

SMARTUPDATE NO

SMARTGUIDE CATEGORIES >

6 Configure SmartFeatures

settings

Congure SmartPower settings

Philips continuously focuses on lowering the environmental impact

of its consumer products by adopting energy efcient ways of power

management.

This section describes how to select a setting for maximum power

savings.

1 Press M on the setup remote control to display the setup menu.

2 Press to select CONFIGURATION > SMARTFEATURES.

3 Press to select one of the following to congure the

settings:

• SMARTPOWER: Sets a power saving mode. Select one of the

following :

• OFF: Rich and dynamic settings, ideal for daylight use.

Disables power savings.

• LOW: A natural picture setting. Achieves low power savings.

• MEDIUM: Ideal settings for watching movies. Achieves

medium power savings.

• HIGH: Applies low-energy settings. Achieves highest

possible power savings.

• AUTOSENSE: Reduces the TV’s power consumption according

to the room’s ambient light. Select YES to enable the TV’s built-

in ambient light sensor.

• LOW POWER STANDBY: Uses minimum power when the TV

is in standby mode.

Note

• If LOW POWER STANDBY is set to YES,

• the TV can only be switched on with a remote control. Please ensure the

remote control is always available. The control buttons at the side of the

TV will not be able to switch on the TV.

• If LOW POWER STANDBY is set to YES, the TV will be congured to

the optimal energy saving mode whenever the TV is switched to standby

mode. As a result, the TV will take a little longer to switch on again. If you

need a fast switch on time, select NO.

LOW POWER STANDBY

SMARTFEATURES

SMARTPOWER OFF

AUTOSENSE NO

USB BREAK-IN

SW DOWNLOAD

SMARTUPDATE NO

SMARTGUIDE CATEGORIES >

English

3 Press toenableordisableSmartSecure.

4 Press toselecttheSmartSecurechannel.

»TheTVchecksfortheSmartSecureIDwhenturnedon.

5 Press toadjustothersecuritysettingsonthismenu.

Note

• SMARTSECUREisavailableonselectedmodelsonly.

• SMARTSECUREmustbeusedwithaPhilipsSmartGateway(PSG)

device.DonotenableSMARTSECUREunlessthePSGhasbeen

conguredatyourlocation.FormoreinformationonthePSG,contact

yourPhilipsauthorizedagentordealer.

REMOTE CONTROL LOCK

SECURITY

SECURITY STANDARD

KEYBOARD LOCK NO

SMARTSECURE >

DECRYPTION CONTROL >

Este manual sirve para los siguientes modelos

Tabla de contenidos

Otros manuales de Televisor de pantalla plana de Philips

Philips

Philips 50PF9731D/37B Manual de usuario

Philips

Philips 37PF5521D/12 Manual de usuario

Philips

Philips 42PF532ID Manual de usuario

Philips

Philips 42PFL7409D/30 Manual de usuario

Philips

Philips 42PF5320 Manual de usuario

Philips

Philips 47PFL5704D Manual de usuario

Philips

Philips Match Line 29PT8444 Manual de usuario

Philips

Philips 32PFL3312 Manual de usuario

Philips

Philips 32PW8808/79R Manual de usuario

Philips

Philips Matchline 42PF9936D Manual de usuario

Philips

Philips Cineos 32PFL9432 Manual de usuario

Philips

Philips 20PF5121 Manual de usuario

Philips

Philips 40PFL4706 Manual de usuario

Philips

Philips 42PFL3322 Manual de usuario

Philips

Philips 42PFL7772D/12 Manual de usuario

Philips

Philips 42PF3320 Manual de usuario

Philips

Philips 26PW9100D - Hook Up Guide Manual de usuario

Philips

Philips 42PF9630A Manual de usuario

Philips

Philips MatchLine 17PF9945 Manual de usuario

Philips

Philips 42PFL5522D - annexe 4 Manual de usuario

Philips

Philips 42PFL7403S Manual de usuario

Philips

Philips MatchLine 23PF9945 Manual de usuario

Philips

Philips 32PFL7862D Manual de usuario

Philips

Philips 34PT8322 Manual de usuario

Manuales populares de Televisor de pantalla plana de otras marcas

Samsung

Samsung LT-P326W Manual de instrucciones

Sony

Sony WEGA KE-50XBR900, KE-42XBR900 Manual de usuario

JVC

JVC LT-26DX7BFN Manual de usuario

Samsung

Samsung CT2Z45 Manual de usuario

Samsung

Samsung LNR1550X Manual de usuario

Westinghouse

Westinghouse TX-42F970Z Manual de usuario

Toshiba

Toshiba 32BV500B Manual de usuario

Samsung

Samsung Smart TV UN55D6000 Guía

RCA

RCA MR53R400 Manual de usuario

JVC

JVC GGT0362-001A-H Manual de usuario

Sanyo

Sanyo FVM4212 Manual de usuario

JVC

JVC LT-32Z48 Manual de usuario

Sony

Sony KE-42XBR900 - 42" Xbr Plasma Wega™ Integrated... Instrucciones de uso

Vizio

Vizio M190MV Manual de uso y cuidado

Samsung

Samsung UN55F7050AF Manual de usuario

RCA

RCA TruFlat F20TF30 Manual de usuario

Samsung

Samsung LW32A33W Guía de inicio rápido

Sony

Sony FD Trinitron Wega KV-30HS420 Manual de usuario