Samsung LT-P326W Manual de instrucciones
English-1
YOU NEW TV
Rear Panel Jacks
Use the rear panel jacks to connect an A/V component that will be connected
continuously, such as a VC or a DVD player.
H MI IN
Supports connections bet een HDMI-
connection-enabled AV devices (set top
boxes, DVD players, AV receivers and digital
TVs).
VI- INPUT
Connect to the digital video output jack on
your DVD/Set-top Box.
(DVI-D terminal does not support PC.)
VI- AU IO INPUT
Connect to the audio output jack on your
DVD/Set-top Box.
PC VI EO ( -SUB) INPUT
Connect to the video output port on your PC.
PC AU IO ( -SUB) INPUT
Connect to the audio output jack on your PC.
COMPONENT IN 2
Connect component video/audio from a
DVD/VCR/Set-top Box.
COMPONENT IN 1
Connect component video/audio from a
DVD/VCR/Set-top Box.
S-VI EO
Connect a Video signal from a
camcorder or VCR
AV INPUT/OUTPUT
Connect a Video signal from
a camcorder or VCR.
ANT IN
Connect to an antenna or to a cable TV system.
SUBWOOFER OUTPUT
Connect to an active (po ered) sub oofer.
ANYNET
HEA PHONE JACK
Connect a set of external headphones
for private listening.
POWER INPUT
BN68-00653A-01Eng.qxd 5/7/04 9:03 AM Page 3
English-2
Connecting H MI
Supports connections between HDMI-connection-enabled AV devices (Set Top boxes, DVD
players, AV receivers and digital TVs).
What is HDMI?
-
H MI
, or high-definition multimedia interface, is a next-generation interface that enables the
transmission of digital audio and video signals using a single cable ithout compression.
-
H MI allows multiple
channels of digital audio (5.1 channels).The difference bet een
H MI
and
VI
is that the
H MI
device is smaller in size, has the
H CP(High efinition Content Protection)
coding feature installed, and supports multi - channel digital audio.
INSTALLATION
1
Connect HDMI cable
from the TV to the input
terminal of the HDMI
device.
How to connect Core
Core provided reduces EMI(E1ectromagnetic Interference) noises from electrical
or electronic products and prevents magnetic impact from ambient environment.
After connecting AV cable of TV or Component cable, install Core as shown in the picture.
BN68-00653A-01Eng.qxd 5/7/04 9:03 AM Page 11
English-3
INSTALLATION
AV OUT
3
Connect a coaxial
cable bet een the
ANT OUT terminal
on the VCR and
the antenna terminal
on the TV.
AV OUT
4
Connect a set of
audio cables
bet een the AUDIO
OUT jacks on the
VCR and the AUDIO
jacks on the TV.
AV OUT
5
Connect a video
cable bet een the
VIDEO OUT jack on
the VCR and the
VIDEO jack on the
TV.
Follow the instructions in “Viewing a VC or Camcorder Tape” to view your VC tape.
* Each external input source device has a different back panel configuration.
A coaxial cable is usually included with a VC . (If not, check your local electronics store).
If you have a “mono” (non-stereo) VC , use the Y-connector (not supplied) to hook
up to the left and right audio input jacks of the TV. If your VC is stereo, you must
connect two cables.
Connecting a VCR
These instructions assume that you have already connected your TV to an antenna or a
cable TVsystem .
Skip step 1 if you have not yet connected to an antenna or a cable system.
1
Unplug the cable or
antenna from the
back of the TV.
2
Connect the cable or
antenna to the
ANT IN terminal
on the back of the
VCR.
BN68-00653A-01Eng.qxd 5/7/04 9:03 AM Page 12
English-4
INSTALLATION
AV OUT
3
Connect an S-video
cable bet een the
S-VIDEO OUT jack on
the VCR and the
S-VIDEO INPUT jack
on the TV.
An S-video cable is usually included with an S-VHS VC .
(If not, check your local electronics store.)
* Each external input source device has a different back panel configuration.
AV OUT
1
To begin, follo
steps 1–3 in the
previous section to
connect the antenna
or cable to your
VCR and your TV.
Connecting an S-VHS VCR
Your Samsung TV can be connected to an S-Video signal from an S-VHS VC .
(This connection delivers a better picture as compared to a standard VHS VC .)
AV OUT
2
Connect a set of audio
cables bet een the
AUDIO OUT jacks on
the VCR and the
AUDIO INPUT jacks
on the TV.
Connecting a VI- Cable
Note:If you are using a DVI-D cable to connect
1.Be sure to connect the audio cable (sold separately)as shown above to get normal TV sound.
2.See Appendix “Display Modes ”for supported resolutions.
3.The screen may have shifted to the right or to the left after connecting the cable.
The screen must be adjusted on the source(Set-top box).
4.Each external input source device has a different back panel configuration.
1
Connect a DVI-D
cable bet een the
DVI-I INPUT
connector on the TV
and the DVI connector
on the DVD player/
Set-Top BOX.
2
Connect a set of audio
cables bet een the
L-AUDIO-R jack
on the TV and the
AUDIO OUTPUT jacks
on the DVD player/
Set-Top BOX.
BN68-00653A-01Eng.qxd 5/7/04 9:03 AM Page 13
English-5
INSTALLATION
Note: For an explanation of Component video, see your DVD player owner's manual.
* Each external input source device has a different back panel configuration.
Connecting a V Player
The rear panel jacks on your TV make it easy to connect a DVD player to your TV.
1
Connect a set of audio
cables bet een the
COMPONENT1 or
COMPONENT2 L, R
AUDIO INPUT
jacks on the TV and
the AUDIO OUT jacks
on the DVD player.
2
Connect a video cable
bet een the
COMPONENT1 or
COMPONENT2
(Y, PB, PR) jacks on
the TV and the Y, PB,
PRjacks on the DVD
player.
Note: For an explanation of Component video, see your Set-Top Box owner's manual.
* Each external input source device has a different back panel configuration.
Connecting a igital TV Set-Top Box
The connections for a typical set-top box are shown below.
1
Connect a set of audio
cables bet een the
L, R COMPONENT1
or COMPONENT2
AUDIO INPUT jacks
on the TV and the
AUDIO OUT jacks on
the Set-Top Box.
2
Connect a video cable
bet een the
COMPONENT1 or
COMPONENT2
(Y, PB, PR) jacks on
the TV and the Y, PB,
PRjacks on the
Set-Top Box.
BN68-00653A-01Eng.qxd 5/7/04 9:03 AM Page 14
English-6
INSTALLATION
Connecting a PC
Note: This figure sho s the Standard Connector-jack panel.
The actual configuration on your TV may be different.
TV Rear panel
PC VIDEO CABLE ( D-SUB )
<Not supplied>
PC AUDIO CABLE
<
Not supplied
>
- Connect the D- Sub cable to “PC (PC IN)” on the rear of your set.
- Connect the stereo audio cable to “AU IO (PC IN)” on the rear of your set
and the other end to “Audio Out” of the sound card on your computer.
BN68-00653A-01Eng.qxd 5/7/04 9:03 AM Page 15
Otros manuales para LT-P326W
6
Otros manuales de Televisor de pantalla plana de Samsung
Samsung
Samsung UN40B7000WF Guía de inicio rápido
Samsung
Samsung PN50B550T2F Manual de usuario
Samsung
Samsung PS-37S4A1 Manual de usuario
Samsung
Samsung PN50B860Y2F Manual de usuario
Samsung
Samsung UN55ES8000G Guía
Samsung
Samsung UN46C9000ZF Manual de usuario
Samsung
Samsung PN58C550 Manual de usuario
Samsung
Samsung UN55D6003SF Instrucciones de montaje
Samsung
Samsung BN68-03116A-01 Manual de usuario
Samsung
Samsung UN85S9AF Guía
Samsung
Samsung LT-P1745 Manual de instrucciones
Samsung
Samsung PN50A460S4D Manual de usuario
Samsung
Samsung PN50B650S1F Manual de usuario
Samsung
Samsung BN68-02900A-05 Manual de usuario
Samsung
Samsung UN46ES7500FXZA Guía
Samsung
Samsung LN-T4065F Manual de usuario
Samsung
Samsung LN40A630MF Manual de usuario
Samsung
Samsung PN42A400C2D Manual de usuario
Samsung
Samsung PN58C590 Manual de usuario
Samsung
Samsung UN37C5000QF Manual de usuario
