Philips 26HF5443/28 Manual de usuario

26HF5443/28 User’s Manual

-2-

Wall mounting instructions/Table stand

According to the type of TV you’ve purchased a wall mount bracket and/or stand may be supplied. To mount

the supplied stand and/or wall mount bracket, refer to separate instructions. Make sure that the wall mount is

fixed securely so that it meets safety standards.

Make sure that air can circulate freely through the ventilation slots

Connecting the Mains

Insert the mains plug into the wall socket and switch on. Please refer to the label on the back of the television for

the correct operating voltage.

Installing the remote control

Care of the screen

Do not touch the screen with anything hard as this may scratch, mar or damage the screen permanently. Do not

rub with dust clothes with chemical treatment. Do not touch the surface with bare hands or greasy cloth (some

cosmet ics are detrimental to the screen). Unplug the TV before cleaning the screen. When the surface becomes

dusty, please wipe gently with absorbent cotton or other soft materials like chamois soaks. Do not use acetone,

toluene and alcohol because they cause chemical damage.

Do not use liquid cleaners or aerosol cleaners. Wipe off saliva or water drops as soon as possible. Their long

time contact with the screen causes deformations and color fading.

Warning concerning stationary images on the TV screen (Plasma displays)

A characteristic of Plasma Display Panels is that displaying the same image for a long time can cause a

permanent after-image to remain on the screen. This is called phosphor burn in. Normal use of the TV should

involve the showing of pictures that contain constantly moving and changing images that fill the screen.

Warning concerning VGA/HDMI display mode

As this product processes in VGA/HDMI mode, some diagonal lines may be seen under circumstances of

environmental interference. This will not affect the computer signal performance that displays in VGA/HDMI

mode.

Environmental

•

Your television contains material that can be recycled and reused by specialized companies. Please find

out about local regulations on the disposal of your old television set. Pay particular attention to the

disposal of exhausted batteries used in your TV Remote Control unit.

•Your television consumes energy in the stand -by mode. Energy consumption contributes to air and

water pollution. We advise you to switch off your television overnight instead of leaving it in stand -by

mode.

• Remove the cover at the back of the remote control.

• Insert the correct type and size batteries into the battery

compartment, making sure they are oriented correctly.

To prevent any unsafe situations, no naked flame sources,

such as lighted candles, should be placed on or in the

vicinity. Avoid heat, direct sunlight and exposure to rain or

water. The equipment should not be exposed to any dripping

or splashing moisture, and no objects fill

ed with liquids, such

as vases, should be placed on it. Insert the aerial plug firmly

into the aerial socket at the bottom of the TV.

-3-

Switch the TV on :

Press the power switch on the TV. An indicator on the front of the TV lights up and the screen comes on.

If the TV is in standby mode (red indicator), press the -TV+ keys or the key on the remote control.

Accessing the Set-up Menu

When the set is in the High Security Mode, the Setup menu can be accessed only with an Institutional Set-up

Remote Control (RG4172BK or RC2573).

RG4172BK RC 2573

(Optional) (Optional)

Navigation

The current menu item can be selected by means of the cursor up and cursor down keys.

Submenus can be accessed from menu items with a “>” symbol by pressing the cursor right key.

•To exit any menu press “Menu” button

•Select “YES” to activate/enable a setting,

“NO” to deactivate/disable.

-4-

•Language: Select the language of the installation

menu. Options are “ENGLISH”, “FRANCAIS”,

and “ESPANOL”.

•Communication: The Communication menu is

required to enable interactive applications. For

more information consult the application notes.

For stand-alone applications select “OFF”.

•Channel Install: This sub menu allows setting the

number of television channels.

•Channel Table: Allows selection between Cable

and Antenna.

•Current Ring:This option allows selection of the

Channel Ring (from 1 to 4)

•Configuration: In the Configuration menu,

various settings and features of the TV can be

adjusted.

•Communication: SP-SPI is SmartPort

communication, SP-I2C is I2C communication

from the RJ-12 connector, and HM-LINK is basic

Hotel Mode communication where the IR

commands are pa ssed directly out of the RJ-12

connector. “OFF”is used for stand-alone

applications.

•STORE :The right cursor button stores the

communication type set.

•DCM TYPE:

GENERIC refers to a US supported

DCM. NO SOURCE SWITCH is not supported in

the US.

-5-

In the Channel Install sub-menu, program settings can be set . When this menu is displayed, all the protections

are inactive.

In the Configuration menu, various settings and features of the TV can be adjusted.

•Switch On/OSD : In this sub -menu the behavior

of the TV after switching on and the behavior of

the On Screen Display can be selected.

•Picture/Sound: In this sub-menu, the Picture and

Sound settings of the TV can be selected.

•Security: In this sub-menu, the Security settings of

the TV can be configured.

•Control: In this sub -menu, the Control settings of

the TV can be configured.

•CC/V-Chip: In this sub-menu, the Close Caption

and V-Chip settings of the TV can be configured.

•Channel : The Channel number can be selected

with the CH+/-buttons.

•Input:

The "Input" menu item selects the desired

input source that will be assigned to the channel.

Possible values are TUNER, AV2, S-VIDEO,

SIDE AV, SIDE S-VIDEO, CVI-1, CVI-2 (HD-

A), PC-D, PC-A, and HD-D. Some input sources

may not be available on certain sets.

•Ring 1: This menu item allows toggling between

Saved and Deleted for Channel Ring 1

•System: This menu item allows toggling between

different TV transmission systems. The options

are AUTO, NTSC, PAL-M, and PAL-N.

•Label: This menu item will be used to add a label/name for each channel.

By pressing the left/right buttons you may enter or exit the label field; by pressing the up/down cursor

you may insert alphanumeric characters.

oPressing the Menu button lets you exit the “Label” menu item.

•Mute: This item enables/disables picture and sound for the particular channel.

oNONE: normal picture and sound enabled

oVIDEO: picture is blanked for this channel

oAUDIO: sound is muted for this channel (e.g. information channel)

•Auto Install TV: This menu item initiates the automatic frequency searching of TV channels. Inside the “Auto

Install TV” sub-menu, select Start to begin frequency searching. (*Note: In some LCD TV models, the TV screen

may go completely blank for a short period of time, or there may be some brief flashing of images on the screen, while the TV is

searching for channels to install. This is normal behaviour of the TV set. When all TV channels have been successfully stored, the

first stored channel will then be displayed).

•Ring 2/Ring3/Ring 4: This menu item allows toggling between Saved and Deleted for Channel Rings 2/3/4.

-6-

In this sub menu the behavior of the TV after switching on and the behavior of the On Screen Display can be

selected.

•Welcome Message:Press Cursor Left/Right to

display the Welcome message entry menu:

oWelcome Message

oLine 1

oLine 2

oClear

With the Cursor Up/Down buttons you can set the

message characters.

•Switch On Channel:

This item sets the television’s

channel at Power On.If STANDARD is selected,

the set will turn on to the last viewed channel. A

specific channel or input can be set so the TV

always comes on tothat specific channel.

•Switch On Volume: This item sets the television’s volume at Power On. Use the Right/Left Cursor buttonsor

direct digit entry to adjust. If STANDARD is selected, the set will turn on to the volume at power off. A specific

switch on volume can be set so the TV always comes on tothat specific volume.

•Switch On Pic Fmt: This item sets the television’s Picture Format at switch on. Use the Right/Left Cursor

buttons or direct digit entry to adjust. The available formats are Full Screen, 4:3, Zoom 14:9, Zoom 16:9, Subtitle

Zoom, Widescreen, and Super Zoom. A description of each of these formats can be found in the Picture

Formats section.

•Power On: The Power On menu function defines the behavior of the television whenever AC Power is applied.

The valid states are "FORCED ON", "LAST STATUS" and “STANDBY”.

oWhen “FORCED ON”, the television can only be switched OFF by means of the main switch or a set-

up remote control or by ESP function (Energy Saving Programmability controls the maximum

continuous viewing time allowed by the control system). When AC is applied the television turns ON.

oWhen “LAST STATUS”, the television goes to the previous status, ON or Stand-by when AC is

applied.

oWhen “STANDBY”, the television always goes to Stand-by when AC is applied.

•Volume Indicator: To display volume indicator when adjusting volume, select "YES". Select “NO” to hide the

volume indicator.

•Channel Display: Program Display values can be: Number, Label, All, None.

-7-

In this sub menu, the Picture and Sound settings of the TV can be configured.

In this sub menu, the Security settings of the TV can be configured.

•Brightness: This changes picture brilliance.

•Color: This changes the intensity of the color.

•Contrast: This changes the difference between

the light and dark tones.

•Sharpness: This changes the picture definition.

•Tint: Adjusts the picture to obtain natural skin

tones.

•Active Control: Active Control optimises the

quality of the picture according to the quality of

reception.

•Treble/Bass: This adjusts the level of treble and

bass effects on the TV’s sound output.

•Balance: This balances the sound on the left and

right speakers.

•AVL (Automatic Volume Leveller): This is

used to limit increases in sound, especially on

programme change or advertising slots.

•Security: The menu function “SECURITY”

allows the user to select one of two states

“HIGH” or “STANDARD”. The default is

“STANDARD”.

oWhile the TV set is in the Security High

Mode, the Set -up menu can only be

accessed with an Institutional Set-up

Remote Control.

oWhile the set is in the Security Standard

Mode, the Set -

up Menu may be accessed

either with an Institutional Set-up

Remote Control, or with a guest remote

control using an authorized access code.

•Keyboard Lock: The Keyboard Lockmenu

function disables the television’s local keyboard

for volume and program control when set to

YES.

•Video Out Mute: This option allows the user to

mute Video outputs from the TV set, to prevent

unauthorized copying of Video content.

-8-

In this sub menu, the Control settings of the TV can be configured.

In this sub menu, the Close Caption and V -Chip settings of the TV can be configured.

•ESP:Energy Saving Programmability Mode

(ESP) controls the maximum continuous viewing

time allowed by the control system. The ESP

Menu function is shown as "ESP", and its valid

values are OFF and 1-99 (in hours).

•Audio/Video Mute: The Audio/Video Mute

menu function determines whether the video

should be blanked and the audio muted, if the

currently tuned channel has no signal.

•Digit Timeout: This is the time-out to enter the

second digit of channel number (example: for

channel number 10 and above).

•Save CC: This menu item provides the option of

saving the Close Caption selection when the

television is switched OFF is “Yes”is selected..

•CC: This menu item allows selection of Close

Caption channels, or to turn Close Caption

“OFF”.

•Saved V -Chip: This menu item provides the

option of saving the V-Chip selection when the

television is switched OFF is “Yes”is selected.

•V-Chip Menu Item: This menu item sets the

option of toggling the V -Chip Menu Item to

“Yes” or “No”.

•V-Chip Setup: This sub-menu allows the setting

and disabling of Movie and TV ratings for the V -

Chip.

•3 Digit Entry: To allow for 3-digit entry of channel numbers via the Remote Control, select “YES”. Select

“NO” to allow only 2 -digit entry of channel numbers via Remote Control.

•Source Menu Item: Toggle between “YES/NO” to enable or disable selection of the TV Source Input via the

guest Setup menu when using the guest Remote Control.

•Channel Guide: Select “YES” to allow the Channel Guide Menu to be displayed if the “Channel Guide” button

is pressed on the guest Remote Control. Select “NO” to disable this feature.

•Min Volume: This item sets the limit for minimum volume allowed for the television set. Use the Right/Left

cursor buttons or direct digit entry to adjust.

•Max Volume: This item sets the limit for the maximum volume allowed for the television set. Use the

Right/Left cursor buttons or direct digit entry to adjust.

-9-

The pictures you receive may be transmitted in 16:9 format (wide screen) or 4:3 format (conventional screen).

16:9 pictures sometimes have a black band at the top and bottom of the screen (letterbox format). This function

allows you to optimize the picture display on screen.

Using the different formats

Select the preferred format from the Switch ON/OSD Menu in the setup screen, or (if applicable) use the

Format button on the Remote Control to select the different modes: 4:3, Zoom 14:9, Zoom 16:9, Subtitle

zoom, Super wide, Full screen, and Wide screen.

4:3

The picture is reproduced in 4:3 format and a black band is displayed on either side

of the picture.

Zoom 14:9

The picture is enlarged to 14:9 format, a thin black band remains on both sides of

the picture.

Zoom 16:9

The picture is enlarged to 16:9 format. This mode is recommended when displaying

pictures that have black bands at the top and bottom (letterbox format).

Subtitle Zoom

This mode is used to display 4:3 pictures using the full surface of the screen leaving

the subtitles visible.

Super Wide

This mode is used to display 4:3 pictures using the full surface of the screen by

enlarging the sides of the picture

Widescreen

This mode restores the correct proportions of pictures transmitted in 16:9 using the

full screen display.

Fullscreen

This mode displays images in full screen.

-10 -

Standby

Press to switch

the TV off.

DVD PLAY

To Start DVD playback (if

applicable)

DVD FAST FORWARD

To Fast Forward DVD

playback (if applicable)

Close Caption

To activate Close

Caption functionality

DVD STOP

To Stop DVD playback

(if applicable)

DVD PAUSE

To Pause DVD playback

(if applicable)

Smart Keys

To select predefined

picture and sound

settings.

Sleep

Activates the sleep timer.

Press repeatedly to increment

the countdown time with 15

minutes.

+ Vol -

To adjust the volume.

Mute

Interrupt the sound or

restore it.

0/9 Digit keys

To select a TV channel.

For a two digit programme

number, enter the second

digit before the dash

appears.

+ CH –Channel Selection

To move up or down a TV

channel.

16:9 Formats

To adjust TV

screen formats

Alternate Channel

To toggle between

alternating channels

To call up or exit the menus.

DVD Rewind

To Rewind DVD play

back

(if applicable)

Source Select

To toggle between

available video sources

CH Guide

To activate Channel

Guide functionality

Este manual sirve para los siguientes modelos

Tabla de contenidos

Otros manuales de Televisor de pantalla plana de Philips

Philips

Philips 32-LCD DIGITAL CABLE READY FLAT HDTV PIXEL PLUS... Manual de usuario

Philips

Philips 36PW9525-79R Manual de usuario

Philips

Philips 21PT3335 Manual de usuario

Philips

Philips 42PF7411 Manual de usuario

Philips

Philips 40PFL3706 Manual de usuario

Philips

Philips Cineos 32PF9966/10 Manual de usuario

Philips

Philips 42PF7520D/79 Manual de usuario

Philips

Philips 47PFL9732D/37 Manual de usuario

Philips

Philips 32PFL3409/98 Manual de usuario

Philips

Philips FlatTV 42PF9966 Manual de usuario

Philips

Philips 32PF5411 Manual de usuario

Philips

Philips 42PFL7782D/12 Manual de usuario

Philips

Philips FLATTV 23PF5121 Manual de usuario

Philips

Philips Matchline 32PW9556/05E Manual de usuario

Philips

Philips Cineos 42PF9830 Manual de usuario

Philips

Philips 42PF9945 - annexe 1 Manual de usuario

Philips

Philips 32PW8808/79R Manual de usuario

Philips

Philips 40PFL5705D Manual de usuario

Philips

Philips 32PF1700T/96 Manual de usuario

Philips

Philips 37PF7321/93 Manual de usuario

Philips

Philips 50PF9956/37 Manual de usuario

Philips

Philips 32PW8806 Manual de usuario

Philips

Philips 37PFL5322/10 Manual de usuario

Philips

Philips 50PF7320A/37 Manual de instrucciones

Manuales populares de Televisor de pantalla plana de otras marcas

Samsung

Samsung LT-P326W Manual de instrucciones

Sony

Sony WEGA KE-50XBR900, KE-42XBR900 Manual de usuario

JVC

JVC LT-26DX7BFN Manual de usuario

Samsung

Samsung CT2Z45 Manual de usuario

Samsung

Samsung LNR1550X Manual de usuario

Westinghouse

Westinghouse TX-42F970Z Manual de usuario

Toshiba

Toshiba 32BV500B Manual de usuario

Samsung

Samsung Smart TV UN55D6000 Guía

RCA

RCA MR53R400 Manual de usuario

JVC

JVC GGT0362-001A-H Manual de usuario

Sanyo

Sanyo FVM4212 Manual de usuario

JVC

JVC LT-32Z48 Manual de usuario

Sony

Sony KE-42XBR900 - 42" Xbr Plasma Wega™ Integrated... Instrucciones de uso

Vizio

Vizio M190MV Manual de uso y cuidado

Samsung

Samsung UN55F7050AF Manual de usuario

RCA

RCA TruFlat F20TF30 Manual de usuario

Samsung

Samsung LW32A33W Guía de inicio rápido

Sony

Sony FD Trinitron Wega KV-30HS420 Manual de usuario