PhDsolutions ECO Series Manual de usuario
EXC-4KP70-HDTL-RX & TX
HDMI 18Gbps HDBaseT™ Extender Over Cat Cable
User Manual
VER 1.0_27052019 EXC-4KP70-HDTL-TX-RX User Manual
Series
EXC-4KP70-HDTL-RX-TX USER MANUAL
Thank you for purchasing this
incredible product.
For best performance and safety, please
read these instructions carefully before
connecting and operating this product.
Surge protection device recomm-
ended
This product contains sensitive electrical
components that may be damaged by
electrical spikes, power surges, electro
static discharge (ESD), lightning strikes or
transients. The use of surge protection
systems is highly recommended in order to
protect and extend the life of your equipment
Safety and Performance Notice
The transmission distances of HDMI over
UTP Cat cables are measured using TE-B
CONNECTIVITY 1427071-6 EIA TIA-568
termination (T568B) of cables is essential
for optimal performance.
Do not run the HDBaseT™ / Cat5e/6/6a
cabling in close parallel proximity or close
to mains power cables. This will minimise
interference of the unshielded twisted pairs
in the CAT5e/6 cable, which can cause
problems with the signal transmission.
Only use the power supply supplied with
the unit, or a PhD Solutions supplied repla-
cement.
Do not disassemble any of the equipment.
This will void the manufacturer’s warranty.
Table of contents
2 www.phdsolution.co
Introduction......................................................
Features...........................................................
Package Contents............................................
Optional Accessories.......................................
Specifications...................................................
Colour Space Conversion (CSC).....................
IR Pin outs........................................................
Operations Controls & Functions.....................
Example Diagrams..........................................
Cable Termination & Best Practices.................
Application Diagram.........................................
Troubleshooting...............................................
Product Warrantee...........................................
1
2
3
4
5
6
7
8
11
12
14
15
16
1.Introduction
The ECO HDMI extender transmitters and display receivers are built with the latest
features, at economic price points and are tailored for the custom installer. They support
HDMI2.0 4K60Hz 4:4:4 HDCP2.2 HDR-18Gbps over HDBaseT™ up to 40m and 1080P
up to 70m.Embedded with CSC visually lossless compression technology they deliver
HDMI, Bi-directional IR, RS232 and PoC power over a single CAT5E/6/6A cable. The
24V-1 Amp power supply supplied with the transmitter can be plugged into either the
transmitter or display receiver end for PoC power over a single CAT cable. These are
typically used to extend a source to a remote display with Infrared and/or RS232 control.
2.Features
• HDBaseT™ distribution of video and audio over a single CAT cable
• Colour Space Conversion (CSC) visually lossless compression technology supports:
HDMI2.0b 4K50/60 4:4:4 HDR 8bit/10bit 18Gbps
• Extends Resolutions of 4K2K@50/60Hz 4:4:4, 4K2K@50/60Hz 4:2:0, 4K2K@30Hz
@24bit, 3D1080P@60Hz@36bit 1080P@120Hz@24bit, 1080P @60Hz@48bit video
up to 40m
• Extends Resolutions of HDMI 1080P@60Hz36bit; 3D1080P@30Hz36bit video up to 70m
• HDR (High Dynamic Range) 10 Bit Pass Through
• Supports HDMI High Bit rate (HBR) audio pass through for most digital HDMI audio
formats including Dolby TrueHD, Dolby Atmos; DTS-HD Master Audio and DTS:X
transmissions
• Supports CEC passthrough
• Supports bi-directional IR and RS-232
• Supports PoC (Power over HDBaseT™) to power the display receiver or the transmitter
end, Power consumption is less than 10W
• DVI,HDCP2.2 and HDCP 1.4 compliant
3
www.phdsolution.co
EXC-4KP70-HDTL-RX-TX USER MANUAL
3.Package Contents *Transmitter & receiver sold separately
EXC-4KP70-HDTL-RX Display Receiver
• 1 x EXC-4KP70-HDTL-RX HDBaseT™ Display Receiver
• 2 x Surface mounting brackets
• 1 x Phoenix terminals (male)
• 1 x ECO-IR-RX 5V IR (RX) receiver cable
• 1 x ECO-IR-TX 5V IR (TX) emitter/blaster cable
• 1 x User manual
EXC-4KP70-HDTL-TX Transmitter
• 1 x EXC-4KP70-HDTL-TX Transmitter
• 2 x Surface mounting brackets
• 1 x Phoenix terminals (male)
• 1 x ECO-IR-RX 5V IR (RX) receiver cable
• 1 x ECO-IR-TX 5V IR (TX) emitter/blaster cable
• 1 x PHD-ADP0047 24V/1A power supply
• 1 x User manual
4.Optional accessories
These optional accessories are not included with this Matrix KIT and can be purchased
separately
PHD-OPTOCABLE-E: Optically isolated IR control cable, 3.5mm Mono to 3.5mm Stereo
jack, for IR passthrough from third party control solutions to PhD Solutions ECO extenders.
Compatible with 12v IR third party products. Note: Cable is directional -Mono end plugs
into IR output of the control system -stereo end plugs into the IR input of the extender.
4www.phdsolution.co
EXC-4KP70-HDTL-RX-TX USER MANUAL
5.Specifications
Technical
HDMI Compliance HDMI 2.0b
HDCP Compliance HDCP 2.2 and HDCP 1.4
Video Bandwidth 600 MHz [18 Gbps]
HDBaseT Class B
Technology Colour Space Compression (CSC)
Video Resolutions up to 4K2K@50/60Hz(YUV4:4:4),4K2K@30Hz,1080P
@120Hz, and 1080P 3D@60Hz
Color Space RGB, YCbCr 4:4:4, YCbCr 4:2:2
Color Depth 10-bit, 12-bit
HDMI Audio Formats
(Pass-through)
LPCM 2/5.1/7.1CH, Dolby Digital, DTS 5.1, Dolby Digital+,
Dolby TrueHD, DTS-HD Master Audio, Dolby Atmos,
DTS:X
ESD Protection Human body model —
±8kV (air-gap discharge) & ±4kV (contact discharge)
Connections
Inputs
Transmitter :1x HDMI Type A [19-pin female]
1x IR INPUT [3.5mm Stereo Mini-jack]
1x RS-232 [Phoenix jack]
Receiver: 1x HDBaseT In [RJ45]
1x IR INPUT [3.5mm Stereo Mini-jack]
1x RS-232 [Phoenix jack]
Outputs
Transmitter : 1x HDBaseT Out [RJ45]
1x IR OUTPUT [3.5mm Stereo Mini-jack]
Receiver: 1x HDMI Type A [19-pin female]
1x IR INPUT [3.5mm Stereo Mini-jack]
5
www.phdsolution.co
EXC-4KP70-HDTL-RX-TX USER MANUAL
Mechanical
Housing Metal Enclosure
Color Black
Dimensions Tx & RX 115mm [W] x65mm [D] x 17mm [H]
Weight 405g
Power Supply Input: AC100 - 240V 50/60Hz, Output: DC 24V/1A
(US/EU standards, CE/FCC/UL certified)
Power Consumption 24W (Max)
Operation Temperature 32 - 104°F / 0 - 40°CV
Storage temperature -4 - 140°F / -20 - 60°C
Relative Humidity 20 - 90% RH (no condensation)
NOTE: Specifications are subject to change without notice.
6.Colour Space Conversion (CSC) Technology over HDBaseT™
HDBaseT™ technology is limited to the maximum bandwidth of CAT cable at 10.2 Gbps,
it does not have enough bandwidth to support the 18Gbps required for 4K UHD resol-
utions of 4K 60Hz 4:4:4 or 4K60Hz 4:2:2 with HDR 8/10bit colour space. With new
sources and displays supporting these high bandwidth resolutions there is now a
requirement to integrate video resolutions with data speeds up to 18 Gbps over distance
to multiple locations. We have implemented CSC (Colour Space Conversion) technology
into our latest products to ensure 4K HDR signals can now be supported over the 10.2
Gbps infrastructure of HDBaseT™.
6www.phdsolution.co
EXC-4KP70-HDTL-RX-TX USER MANUAL
Colour Space Conversion reduces the data rate of the HDMI signal by converting the
colour space (or Wide Colour Gamut) from 4:4:4 or 4:2:2 to a lower format. Within
Colour Space Conversion technology, the native resolution and frame rate remain
constant from end to end. The only part of the signal that is converted during transm-
ission is the colour gamut variations.
* CSC products do not support HDR10+ or Dolby Vision due to the way these specific
creations of HDR are encoded. These codecs transmit repeated metadata packets
throughout the transmission of any media making it impossible at this stage to convert
in the same way using CSC technology.
7.IR Pin Outs
IR (RX) Receiver and IR (TX) Emitter/Blaster
IR RECEIVER IR BLASTER
7
www.phdsolution.co
EXC-4KP70-HDTL-RX-TX USER MANUAL
8.Operations Controls and Functions
8.1. HDBaseT™ Transmitter
EXC-4KP70-HDTL-TX
1
23456 7
89
No. Name Function description
1 POWER This LED illuminates when the device is connected with
the power supply.
2 DC 24V
Plug the supplied PHD_ADP0047 24V DC power supply
into the unit and connect the adapter to the AC wall
outlet. (Only plug into either the Transmitter or the
Display receiver )
3 HDBaseT™ OUT
Standard HDBaseT™ signal output port. Connect to the
Display Receiver HDBaseT™ input with a terminated
UTP CAT cable.
4HDMI2.0 INPUT HDMI input port. Connect to an HDMI Source with an
HDMI cable.
5 IR IN IR Receiver input. Connect the 5V IR Rx cable here.
6 IR OUT IR transmitter output. Connect the 5V IR TX emitter/
blaster cable here.
8www.phdsolution.co
EXC-4KP70-HDTL-RX-TX USER MANUAL
7 RS-232 The Phoenix Jack sends RS232 control Signals
between the Transmitter & Display Receiver
8Connection Signal
Indicator Lamp
※Illuminate: The Transmitter and Receiver connection
status is GOOD
※Flashing: The Transmitter and Receiver connection
status is POOR
※Dark: The Transmitter and Receiver are not
connected.
9Data Signal
Indicator Lamp
※Illuminate: HDMI signal with HDCP.
※Flashing: HDMI signal without HDCP.
※Dark: No HDMI signal.
8.2 HDBaseT™ Display Receiver
EXC-4KP70-HDTL-RX
18 9
3 4 5 6
27
9
www.phdsolution.co
EXC-4KP70-HDTL-RX-TX USER MANUAL
No. Name Function description
1 POWER This LED illuminates when the device is connected
with the power supply.
2 DC 24V
No connection is required if powered by the transmitter
(The Transmitter will power the display receiver from
the HDbaseT IN port over PoC from the transmitter.)
You can power the transmitter from the display receiver
by connecting the 24VDC 1Amp power supply here.
3 HDBaseT™ IN
Standard HDBaseT™ signal input port. Connect to the
Transmitter HDBaseT™ input with a terminated UTP
CAT cable.
4 HDMI 2.0 OUT HDMI output port. Connect to the display with an HDMI
cable.
5 IR IN IR Receiver input. Connect the 5V IR Rx cable here.
6 IR OUT IR transmitter output. Connect the 5V IR TX emitter/
blaster cable here.
7 RS-232 The Phoenix Jack sends RS232 control Signals between
the Transmitter & Display Receiver.
8
Connection
Signal Indicator
Lamp
※Illuminate: The Transmitter and Receiver connection
status is GOOD
※Flashing: The Transmitter and Receiver connection
status is POOR
※Dark: The Transmitter and Receiver are not connected.
9Data Signal
Indicator Lamp
※Illuminate: HDMI signal with HDCP.
※Flashing: HDMI signal without HDCP.
※Dark: HDMI signal.
10 www.phdsolution.co
EXC-4KP70-HDTL-RX-TX USER MANUAL
Otros manuales para ECO Series
1
Este manual sirve para los siguientes modelos
2
Tabla de contenidos
Otros manuales de Extensor de PhDsolutions
