Pfeiffer RC 500 Manual de usuario
IG 0140 BEN_C (1012) translation of the original instructions
Operating Instructions
RC 500 / RC 500 WL
Remote Control for Leak Detector SmartTest
EN
2
Product identification
The information of the type plate is required for the
communication with Pfeiffer Vacuum.
Validity
This document is valid for products with article number
PT 445 420-T RC 500 WL
PT 445 421-T RC 500
You can find the article number on the type plate.
This document is based on the firmware versions V1.4 and up.
If the device does not function as described, check whether your
device is equipped with this firmware version.
(See 5.3.7 Info: device information)
Subject to technical changeswithout prior notice. The
illustrations are not to scale.
Fig. 1 Product identification
3
Table of contents
1 Operating instructions 5
1.1 How to use this manual 5
1.2 Warning and danger symbols 5
2 Important safety instructions 7
2.1 Intended use 7
2.2 User requirements 7
2.3 Restrictions of use 8
2.4 Hazards in the event of intended use 8
3 Description RC 500 / RC 500 WL 13
3.1 Use 13
3.2 Operating Elements 14
3.3 Back of the RC 500 / RC 500 WL 16
3.4 Supplied equipment 17
4 Installation 18
4.1 Connection to the leak detector 18
4.2 Connecting radio transmitter and leak detector 19
4.3 Inputs and outputs 20
4.4 Wall plug-in power supply 22
5 Operating the remote control 24
5.1 Starting up the RC 500 / RC 500 WL 24
5.2 Touch display operation 25
5.3 Main menu for the configuration 27
5.3.1 Buttons with basic functions 28
5.3.2 Connecting / disconnecting (RC 500 WL) 29
5.3.3 Setting the trigger level 30
5.3.4 Scaling of the leak-rate curve 31
5.3.5 Sound volume 33
5.3.6 Recorder 34
5.3.7 Info: device information 36
5.3.8 Miscellaneous 37
5.3.8.1 Energy-saving options (RC 500 WL) 38
4
5.3.8.2 Set Time and Date 39
5.4 Operating the leak detector 40
5.5 Paging function 42
6 Maintenance tasks 43
6.1 Spare parts 43
6.2 Maintenance 43
6.3 Cleaning 44
7 Transport and disposal 45
7.1 Transporting 45
7.2 Disposal 45
8 Technical Data 46
8.1 Weight / dimensions 46
8.2 Characteristics 46
8.3 Environmental Conditions 47
8.4 Mains power for wall plug-in power supply 47
8.5 Wireless permits of RC 500 WL 47
9 Ordering Information 48
10 Declaration of conformity 48
5
1 Operating instructions
1.1 How to use this manual
• Please read these operating instructions before
commissioning the remote control.
• Keep the operating instructions so that you can refer to
them at any time.
• Enclose the operating instructions if the remote control is
passed on to third parties.
• We reserve the right to alter the design or any data given
in this manual.
• The illustrations are not binding.
1.2 Warning and danger symbols
STOP Danger
Specifications for the prevention of bodily injuries of all kinds.
Warning
Specifications for the prevention of severe material and environmental
damage
Caution
Specifications for handling or use. Failure to observe these can lead to
faults or minor material damage.
6
7
2 Important safety instructions
Notice: Before installing the RC 500 / RC 500 WL remote control
all safety instructions should be read carefully and
should be understood properly.
2.1 Intended use
The RC 500 / RC 500 WL remote control is intended for the
operation of the SmartTest HLT 550, HLT 560, and HLT 570
leak detectors.
The RC 500 / RC 500 WL remote control must only be used
for the purpose and within the context outlined in these
operating instructions.
Only Pfeiffer Vacuum original accessories are to be used.
2.2 User requirements
• The user must be familiar with the function of the device;
he or she may only connect and operate the device after
having read and understood the operating instructions.
• The user should consult local, state, and national
agencies regarding specific requirements and
regulations for devices with wireless transmission
capability.
• In case of more questions regarding safety, operation
and/or maintenance, the user should contact our nearest
representative.
Skilled personnel
The RC 500 / RC 500 WL remote control may only be
connected and operated by properly trained staff.
8
2.3 Restrictions of use
2.4 Hazards in the event of intended use
When handling the remote control:
STOP Danger
Danger in explosive environments.
The RC 500 / RC 500 WL remote control may only be used away from
explosive environments.
STOP Danger
Possible interference with pacemakers.
The performance of pacemakers may be affected by the magnets on the
back of the RC 500 / RC 500 WL remote control. Observe the distances
indicated by the pacemaker manufacturer.
STOP Danger
Possible liquid crystal hazard!
If the display has broken, prevent liquid crystals from entering people's
mouths or eyes. Use soap and water to wash hands, feet or clothes that
have come into contact with liquid crystals.
9
(1) FCC: Federal Communications Commission,
approval authority for communication devices (USA)
When handling the rechargeable
battery and wall plug-in power supply:
Notice: Charging the battery at higher temperatures (> 40° C)
decreases its service life.
STOP Danger
Possible radiation hazard!
When the device is operated, a minimum distance of 7 cm between the
remote control and people must be observed, with the exception of hands
and wrists. Operation at a shorter distance than indicated above is not
allowed. The RC 500 / RC 500 WL remote control complies with part 15 of
the FCC regulations(1).
Warning
Possible short circuit hazard!
In case fo a short-circuit the battery might ignite, explode, leak battery fluid,
or become overheated and cause burns.
Do not short-circuit the battery of the RC 500 WL remote control.
Warning
Possible explosion hazard!
The battery of the RC 500 WL remote control can explode if it is extreme
overheated.
Do not set fire to the battery as it might explode.
10
Environmental conditions of the remote
control (see chapter 8):
Caution
Possible risk of damage!
The electronics of the RC 500 WL remote control may be damaged by an
incorrect supply voltage.
Only use the accompanying wall plug-in power supply.
Caution
Possible risk of damage!
The RC 500 / RC 500 WL remote control may be damaged in the open
through moisture, strong insolation, or intense dust.
Only use the device inside buildings.
Caution
Possible risk of destruction!
Aggressive substances may damage the RC 500 / RC 500 WL remote control
beyond repair.
Avoid contact between the RC 500 / RC 500 WL and bases, acids, and
solvents, and do not expose it to extreme climatic conditions.
Caution
Possible risk of destruction!
The RC 500 / RC 500 WL remote control may be damaged beyond repair by
penetrating liquid.
Do not switch on the RC 500 / RC 500 WL remote control if liquid has
penetrated the unit. Contact the Pfeiffer Vacuum Service Department.
Este manual sirve para los siguientes modelos
1
Tabla de contenidos
Otros manuales de Instrumento de medición de Pfeiffer
Manuales populares de Instrumento de medición de otras marcas
Endress+Hauser
Endress+Hauser Proline Promag 50 Especificaciones técnicas
Siemens
Siemens SITRANS F Coriolis FCT030 Manual de lista de piezas
KLINGER
KLINGER CMF V Series Manual de usuario
EXFO
EXFO FTB-2 Manual de operación y mantenimiento
Keysight
Keysight M8290A Manual de usuario
ADTEK
ADTEK MW-5 Manual de usuario