peplink Pepwave AP One Series Manual de usuario
Pepwave AP One Series:
AP One Enterprise / AP One AC mini / AP One Rugged / AP One Flex / AP Pro AC
October 2018
COPYRIGHT & TRADEMARKS
Specifications are subject to change without notice. Copyright © 2018 Pepwave Ltd. All Rights Reserved. Pepwave and the
Pepwave logo are trademarks of Pepwave Ltd. Other brands or products mentioned may be trademarks or registered trademarks of
their respective owners.
Table of Contents
Introduction and Scope 5
Product Features and Benefits 6
Package Contents 7
AP One Enterprise (APO-ENT) 7
AP One AC mini (APO-AC-MINI) 7
AP One Rugged (APO-RUG) 7
AP One Flex (APO-FLX) 7
AP Pro AC (APP-AGN3) 7
Hardware Overview 8
AP One Enterprise 8
AP One AC mini 9
AP One Rugged 10
AP One Flex 11
AP Pro AC 12
Installation 13
Installation Procedures 13
Dashboard 15
General 16
AP 17
Network 19
WAN 19
LAN 21
Interfaces > Ethernet Port 24
PepVPN 24
AP 27
Wireless SSID 27
COPYRIGHT & TRADEMARKS
Specifications are subject to change without notice. Copyright © 2018 Pepwave Ltd. All Rights Reserved. Pepwave and the
Pepwave logo are trademarks of Pepwave Ltd. Other brands or products mentioned may be trademarks or registered trademarks of
their respective owners.
Settings 38
WDS 41
System Tab 43
Admin Security 43
Firmware 44
Time 45
Event Log 46
SNMP 46
Controller 49
Configuration 50
Feature Add-Ons 52
Reboot 52
Tools > Ping 53
Tools > Traceroute 53
Tools > Nslookup 54
Status 54
Device 55
Client List 56
WDS Info 56
Portal 57
Rogue AP 57
Event Log 58
Restoring Factory Defaults 58
Appendix 59
Datasheets 60
COPYRIGHT & TRADEMARKS
Specifications are subject to change without notice. Copyright © 2018 Pepwave Ltd. All Rights Reserved. Pepwave and the
Pepwave logo are trademarks of Pepwave Ltd. Other brands or products mentioned may be trademarks or registered trademarks of
their respective owners.
1 Introduction and Scope
Our AP Series of enterprise-grade 802.11ac/a/b/g/n Wi-Fi access points is engineered to
provide fast, dependable, and flexible operation in a variety of environments, all controlled by an
easy-to-use centralized management system.
From the small but powerful AP One AC mini to the top-of-the-line AP Pro Duo our AP Series
offers wireless networking solutions to suit any business need, and every access point is loaded
with essential features such as multiple SSIDs, VLAN, WDS, and Guest Protect.
A single access point provides as many as 32 virtual access points (16 on single-radio models),
each with its own security policy (WPA, WPA2, etc.) and authentication mechanism (802.1x,
open, captive portal, etc.), allowing faster, easier, and more cost-effective network builds.
Each member of the AP Series family also features a high-powered Wi-Fi transmitter that
greatly enhances coverage and performance while reducing equipment costs and maintenance.
This manual includes Pepwave AP models supporting firmware 3.6.0.
Other Pepwave AP models are described in the Pepwave ap v3.5.4 user manual.
COPYRIGHT & TRADEMARKS
Specifications are subject to change without notice. Copyright © 2018 Pepwave Ltd. All Rights Reserved. Pepwave and the
Pepwave logo are trademarks of Pepwave Ltd. Other brands or products mentioned may be trademarks or registered trademarks of
their respective owners.
2 Product Features and Benefits
Key features and benefits of AP Series access points:
● High-powered Wi-Fi transmitter enhances coverage and lowers cost of ownership.
● Independent security policies and encryption mechanisms for each virtual access point
allow fast, flexible, cost-effective network builds.
● Centralized management via InControl reduces maintenance expense and time.
● WDS support allows secure and fast network expansion.
● Guest Protect support guards sensitive business data and subnetworks.
● WMM (Wi-Fi Multimedia) and QoS (Quality of Service) support keeps video and other
bandwidth-intensive data flowing fast and lag-free.
COPYRIGHT & TRADEMARKS
Specifications are subject to change without notice. Copyright © 2018 Pepwave Ltd. All Rights Reserved. Pepwave and the
Pepwave logo are trademarks of Pepwave Ltd. Other brands or products mentioned may be trademarks or registered trademarks of
their respective owners.
3 Package Contents
AP One Enterprise (APO-ENT)
1x AP One Enterprise
1 x Mounting Bracket
AP One AC mini (APO-AC-MINI)
1 x AP One mini
1 x 12V2A Power supply
1 x Mounting Bracket
AP One Rugged (APO-RUG)
1 x AP One Rugged
1 x 12V2A Power supply
3 x 5dBi Omni Antenna
AP One Flex (APO-FLX)
1 x AP One Flex
1 x Cable Tie
* Power supply or Pepwave Passive PoE Injector are not included
AP Pro AC (APP-AGN3)
1 x AP Pro AC
1 x Waterproof Power Connector Kit
2 x Waterproof Ethernet Kit
COPYRIGHT & TRADEMARKS
Specifications are subject to change without notice. Copyright © 2018 Pepwave Ltd. All Rights Reserved. Pepwave and the
Pepwave logo are trademarks of Pepwave Ltd. Other brands or products mentioned may be trademarks or registered trademarks of
their respective owners.
4 Hardware Overview
4.1 AP One Enterprise
Bottom View Top View Front View
LED Indicators
Status
RED – Access point initializing
GREEN – Access point ready
LAN 1
OFF – No device connected to Ethernet port
BLINKING – Ethernet port sending/receiving data
ON – Powered-on device connected to Ethernet port
Note that LAN 5 displays the status of the uplink connection
COPYRIGHT & TRADEMARKS
Specifications are subject to change without notice. Copyright © 2018 Pepwave Ltd. All Rights Reserved. Pepwave and the
Pepwave logo are trademarks of Pepwave Ltd. Other brands or products mentioned may be trademarks or registered trademarks of
their respective owners.
4.2 AP One AC mini
Front View Rear Panel View
LED Indicators
Status
RED – Access point initializing
GREEN – Access point ready
Wi-Fi
OFF – 2.4/5GHz Wi-Fi radio off
BLINKING – AP sending/receiving data
GREEN – 2.4/5GHz Wi-Fi radio on
Note that this model includes a 2.4GHz Wi-Fi radio and a 5GHz Wi-Fi radio that can
operate simultaneously to increase speed and reduce interference.
COPYRIGHT & TRADEMARKS
Specifications are subject to change without notice. Copyright © 2018 Pepwave Ltd. All Rights Reserved. Pepwave and the
Pepwave logo are trademarks of Pepwave Ltd. Other brands or products mentioned may be trademarks or registered trademarks of
their respective owners.
4.3 AP One Rugged
Front View Rear Panel View
LED Indicators
Power
On – Power On
OFF – Power Off
Status
RED – Access point initializing
GREEN – Access point ready
Wireless
OFF – 2.4/5GHz Wi-Fi radio off
BLINKING – AP sending/receiving data
GREEN – 2.4/5GHz Wi-Fi radio on
Note that this model can operate in either 2.4GHz or 5GHz mode, depending on Wi-Fi
radio settings.
COPYRIGHT & TRADEMARKS
Specifications are subject to change without notice. Copyright © 2018 Pepwave Ltd. All Rights Reserved. Pepwave and the
Pepwave logo are trademarks of Pepwave Ltd. Other brands or products mentioned may be trademarks or registered trademarks of
their respective owners.
4.4 AP One Flex
Front View Rear Panel View
Connector Panel (Inside the Lid)
LED Indicators
Status
RED – Access point initializing
GREEN – Access point ready
LAN
OFF – No device connected to Ethernet port
BLINKING – Ethernet port sending/receiving data
ON – Powered-on device connected to Ethernet port
Number of connected clients (1-10, 11-20, 21-30, 31-40)
COPYRIGHT & TRADEMARKS
Specifications are subject to change without notice. Copyright © 2018 Pepwave Ltd. All Rights Reserved. Pepwave and the
Pepwave logo are trademarks of Pepwave Ltd. Other brands or products mentioned may be trademarks or registered trademarks of
their respective owners.
Otros manuales para Pepwave AP One Series
3
Este manual sirve para los siguientes modelos
5
Tabla de contenidos
Otros manuales de Punto de acceso inalámbrico de peplink
